Amazonka
Natasha, Irina, thanks girls, for the information!
belena74
Girls, are you happy with shredding cabbage in Kesh? Personally, I do not like it, from the word at all (((. There is a processor and an AT 340 shredder, but everywhere, no matter how hard I try, it still turns out full of large pieces of cabbage, not shredded ... Although I try to put cabbage in the hole correctly ... I set the speed to 3 . Very rude anyway ... Maybe I'm doing something wrong? Maybe there is some secret?)
Amazonka
Quote: belena74
full of large pieces of cabbage, not shredded ...
belena74, Elena, when I did it for the first time, I did it too, and the next time, I increased the speed and it turned out better
belena74
Amazonka, thank you, Larissa, I'll try to increase the speed ... And then my soul does not lie to chop the cabbage. I myself like neat cabbage, therefore, ridiculously, I often shred it with handles ...
Amazonka
Quote: belena74
Thank you
Elena, not at all




Girls, and today I received a hook and whisks, I will experiment, there is a difference or not
LisaNeAlisa
Elena, at 340 at 4 speeds. I make pieces according to the width of the hole and as long as possible. First I hold it with my hand, then with a pusher. There are large ones, but not so many. But when we ferment cabbage, 2 buckets in 40 minutes




I do it on the thinnest.
belena74
LisaNeAlisa, thanks, Anita. I also do it on the thinnest one, I'll try to play with speed, maybe it will turn out better ...
Amazonka
Help, girls, help! So I wanted an old hook, but I got it and almost screwed up my Keshenka (9040) with it, I wanted to adjust the nut right away, but it’s difficult to get to it because of the high side, and it seems that it is tightly attached there, but put it like this a metallic rattle began, immediately turned it off, but it still ripped off a slightly adjacent socket with a rim, although I immediately checked it when I put it, there was a gap, apparently it turned out to be not enough during rotation, what to do, did anyone adjust this hook?
Kenwood kitchen machine: working with attachments
Kenwood kitchen machine: working with attachments




Everything, sorted it out, my husband came home from work and adjusted everything, I didn't have the strength to unscrew the nut




Maybe someone will need my information on the corollas (so far only a photo, I will write which one I like better in the process), in the center, the corolla, which is now supplied with the Cooking chef 9040 and 9060, was purchased separately along the edges, reinforced and fluffy. Outwardly, the old corollas seem to be wider or something, and for some reason, compared to the current one, even the fluffy one seemed to me more reliable and of high quality
Kenwood kitchen machine: working with attachments
Masha Ivanova
Amazonka, Larissa! Congratulations on such a fleet of hooks and whisks! Now you are armed to the teeth! It remains only to experience and choose. I hope you will share the results with us.
Corollas are really different. The last one, 9-bar, is smaller in diameter and thinner than the rest. But which is better, only practice will show. Now you will tell us if there is a difference and in what.
Good luck! And we are waiting for the results.
Amazonka
Quote: Masha Ivanova
I hope you will share the results with us.
I will definitely share The hook had to be lowered lower, but both whisks, on the contrary, were raised, as they were scraping hard along the bottom.
Quote: Masha Ivanova
Now you are armed to the teeth!
I am like Matroskin from Prostokvashino, now I will be three times happier, because I will have three corollas
Irlarsen
I'll tell you right away. Everything jumps out of the new whisk with a bang. Marshmallow, squirrels, just shake off and you're done. The old one had to be sophisticated in order to pick out a valuable product.
Amazonka
Quote: Irlarsen
everything jumps out with a bang
My marshmallow did not pop out at all, I picked it out with a spatula
zvezda
Larissa, Yeah! Armed for 100 !! Write, we will wait .. Although I repeat, to each his own!
Amazonka
Quote: zvezda
I repeat, to each his own!
Olya, I think so too, so the information is purely for familiarization, two whisks will definitely not be superfluous for me, for example, if I whipped something with one, and then another needs to be whipped, then I just changed the bowl and whisk and started the car, and not wash and dry the first, again, it is so convenient for me and does not mean that to everyone.
Martin
Hello ladies. I took care of buying a screw nozzle by the summer. The husband climbed on the Internet and said that a separate juicer is better than a nozzle, because the Kenwood type does not have enough power for it - someone complained. Who has what experience? For me it is more for tomato juice. And also like the reviews that the juice from the nozzle is strong with pulp. And who has experience - how does a separate auger juicer?
Doc1900
Good day. Tell me which model of ice cream maker fits the 9040s?
zvezda
Doc1900, you an ice cream maker or what !! Please clarify!
Doc1900
Quote: zvezda
Doc1900, an ice cream maker or something !! Please clarify!
Yes, an ice cream maker. Found AT956 in mvideo, will this work?
LisaNeAlisa
Quote: Doc1900

Yes, an ice cream maker. Found AT956 in mvideo, will this work?
She is on a bowl 4.6
zvezda
957 is necessary!
Gayane Atabekova
zvezda, Help Olenka. I accidentally found an ice cream maker KAB956PL here. I have a KMS 570 by 4.6. The heart feels that it will not fit. We have practically no attachments.
Masha Ivanova
Gayane Atabekova, Gayane! See your post 950 and Paul's answer to you in post 951-953 already for 2016. Page 42
That is, you need AT956
Gayane Atabekova
Masha IvanovaThank you, Helen. And how did you find it. It's just written on her chef. the figures are the same. rl I think plastic. Maybe KAV instead of AT is coming now? Here we have no point in asking. They are not boom boom. I was looking for information on the internet, but I could not find it.
Masha Ivanova
Gayane Atabekova, Gayane! I'm right in the Kenwood topic, working with attachments, I found a search on top and typed in the search something like: "Which Kenwood kitchen machine fits the Kenwood KAB 956 PL attachment"
and the search gave me several answers. I started reading every one. And on the 3-4th answer I came across these posts. I was surprised to see that this is your question!)))
Amazonka
Hello everyone! Girls and boys who got a bowl of ice cream, please tell me how you solved the problem? Somewhere in the topics I read that it seemed like they offered to glue it under the rim, did anyone try it?
zvezda
Larissawhat horror !! And try to call the support hotline ??!
Amazonka
Quote: zvezda
what a horror!
zvezda, Olya, I understand that such a problem for many who bought an ice cream maker calms one thing, I got it as a gift. I will call the hotline, but is there any point in changing them, since all of them are like that, and besides, you will have to pay for the transfer, so I thought, maybe it can be repaired somehow so that it doesn't flow
LisaNeAlisa
Amazonka, the bulk purchase was about 2 years ago, read the topics for that period. I remember doing a lot, but since I don't have an ice cream maker, I didn't remember.
Amazonka
Quote: LisaNeAlisa
read the topics
LisaNeAlisa, Anita, I read, it looks like everyone is renting for an exchange
lira3003
Quote: Amazonka
the bowl of the ice cream has flowed,
Votzhezhnepruha ... LarissaI just wanted to ask you how your ice cream maker is doing. All the same, it was not for nothing that OlgaVB then wrote that it was better to take a detached one.
Masha Ivanova
Amazonka, Larissa! This question has been raised several times in the past. From my memory, no one really succeeded in fixing it. Then they just used part of the ice cream maker as a spare bowl. Some people just bought a spare bowl for the purpose of buying it (when the bowls were either in short supply, or almost more expensive than an ice cream maker).
zvezda
Lena, I cannot say for sure from what year, but for 10 years our Sveta, the Blue Avelsinchik, has been working for sure, but for a 4.6 liter model!
Masha Ivanova
zvezda, Olya! So I'm not saying that they all broke. Someone was lucky and used by people. It was just that many had a leak and no one seemed to fix it. All kinds of glue seemed to be toxic to the dishes where you make your own food. Reluctance to look for excerpts on this topic, since there is no positive solution to this issue. Unsuccessful attachment.
Amazonka
Quote: lira3003
Votzhezhnepruha
Rita, yeah, but we can't give up homemade ice cream anymore, we liked it so much, I will probably choose a separate ice cream maker
NataliaL
And what was the recipe?
lira3003
Quote: Amazonka

Rita, yeah, but we can't give up homemade ice cream anymore, we liked it so much, I will probably choose a separate ice cream maker
No, well, there is even nothing to argue! I just follow Olya's link and make cream + condensed milk + berries. I like it, the kids eat, but my husband doesn't like ice cream very much. All the same, it turns out that Ken has one nozzle It would be better if they stopped releasing it than a sieve
zvezda
Lena, What are you!! I just said, I have no questions for you and I can't say anything! I have a freezer
Amazonka
Quote: NataliaL
And what was the recipe?
NataliaL, cream + condensed milk + frozen strawberries, all this in a large blender, and then in an ice cream maker.
Margass
Amazonka, and the proportions?
zvezda
Tanyusha, approximately!!
bzalex
In Moscow Okay, a set MAX980 for 8000 rubles and a meat grinder for 4000. Maybe someone is missing and wants
Irlarsen
Great!
tortik1961
Marina,
Masha Ivanova
Girls! In which store you can buy the KENWOOD KAX941 nozzle, the grinder-mill at the normal price and what is the normal price now? Something I do not really light up the shops.
Irisha33
Girls, tell me please, what is the difference between the KAX970 and KAX980 dough sheeters? There is also AT series
P.S .: sorry we don't have Obi ... a set of rolls for 8000 is a dream)))
Irlarsen
Irisha33Which car do you need?
Irisha33
Irlarsen, recently acquired chef XL 4100
Irlarsen
Irisha33Then, if I'm not mistaken, an adapter is needed for the KAH series, and your own nozzle is just AT.





As I understand it, KAH970 is a rolling out for the kmix series (and it seems like Sense as well). Then kax980me was released for new machines with induction. But the AT series go to the rest of the machines
zvezda
Quote: Irisha33
what is the difference
970 with a handle or as it is called a crossbar, and 980 without! Forget such prices !! Now these attachments are 9900 each !!
Masha Ivanova
Irisha33, Irina! About the difference in the rolls you are interested in.
Go to the Kenwood theme, we work with attachments. There, on page 122, read from post 6058 and almost the entire page to the end. On the same page there is also a link on which you will click and read everything in more detail.

All recipes

New recipe

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers