Kitchen machine Kenwood (2)

Yes, it is more difficult to reach the site, there is a rug, and under it the void ... bends. And then, no one canceled the individual geometry of the bowl .. It turns out that my hook is very low. I will wait for the owners of the 20s, and then I will experiment, there is nothing to lose, anyway I don’t make the dough in it now.

It is necessary to pull out the rug and measure it to the table top. With four of us, it turns out that the lower, the less winding.

I (20 ken) have a distance of 1.5 cm from the hook to the rubber mat. The last time the dough was wrapped around the hook to the "stopper", but it was very thick. Less dense, it seems, does not climb so high.

Likewise, 15 mm to the mat.

020: up to the rug 12 mm, measured with a tape measure, without a rug to the table top 21-22 mm, measured with a caliper, with a bowl under the hook, about half of the first phalanx of the little finger is included. I have a little dough, yesterday I kneaded Mary's bread to the Steba oven with sourdough, it spread along the bottom, added one and a half stall spoons of flour, nothing changed, I didn't add any more so that the dough was not too thick, when the loaf began to form, the dough was taut ... Today, a kneader for Neapolitan pizza dough from Anise, it is very liquid, it crawled slightly on the hook, only on the bent part.

Bechamel sauce in a Kenwood 086/096 kitchen machine, induction.

Very nice and appetizing.
I love Kesha for the opportunity to make bechamel and custard dough, for custard. I mix everything with a silicone nozzle. It always turns out that it just can't

Ol, you didn't twist it too, did you?

no, I didn't twist it, it came from the seller.

It turns out that I have the lowest hook position.

looks like it was regulated, what do you think?

[Business]

What is it?

I think that such
🔗
Business, Lenochka, I sincerely congratulate you on your wonderful assistant !!!
A wonderful device!
Let Kenka serve for a long time and do not know wear and tear!

I tried it on with my induction hook and fit a box of matches. Any yeast dough kneads perfectly, climbs on the hook within reasonable limits.

In my 010, too, the boxes fit under the hook

: yahoo: I'm shocked! Pelmeni dough - 1 minute !!!!! Girls, I read the forum, but maybe I haven't found it yet, tell me - what nozzle for what ??? Of the three included (whisk, hook and K-attachment). I swear I'll read everything, but I want to cook faster

[Lenochka]

Lenochka, here:
"K-shaped nozzle
This attachment is ideal for making yeast and puff pastries, as well as dough for shortbread cookies, biscuits or cakes.
Spherical whisk
The spherical whisk is ideal for whipping egg whites or cream into a thick foam. And also for making mousse from cream or butter. The attachment will help you knead batter for donuts or pancakes.
Dough hook
Hook for kneading thick dough. Suitable for both yeast dough and hard dough for dumplings or pasta ... "
K-shaped is still good in all cases for mixing-stirring. For example, knead minced meat for cutlets, dumplings, all kinds of sausages.

Can I have one more question? When kneading dumplings dough, I opened the blender slot - it did not spin. It turns out when I just put the blender on - will it start working? They told me in the store that supposedly it is possible at the same time ...

[Elena]

Elena, you try again. It seems to me that in all Kens, when turned on, all the jacks, including the high-speed one, begin to spin and turn. Separately the same on / off switch, for sure, is not for him.

[Elena]

Elena

They told me in the store that it was supposedly possible at the same time.

Never do that! Read the manufacturer's instructions!

By the way, by the way, the manager also told me in the store that it was possible to use two and three sockets at once. kind of like kneading dough and whipping a cocktail at the same time ...

I have a question. I cannot find it in the instructions and on the website. on the sense on the mode dial there are icons: stop, a circle with an arrow, minimum and then 1-2, etc.
What does this circle with an arrow mean? is this smart mode? He just kind of always spins quietly ...

There was a discussion about the kneading of the dough and the distance from the hook to the bottom of the bowl. So today I decided for the first time to knead yeast dough on khachapuri. I took a glass of liquid and 2.5 glasses of flour. It was kneaded well, the dough was crawling along the hook, but within the permitted limits. At the end, they gathered in a small cam and padolo down. The hook did not go behind the "hat". I have a glass of 400 ml, Kenwood sense with a bowl 4.6. I measured the distance to the bottom of the bowl - the extreme phalanx of the little finger gets in.

Girls, and who has ken 20 or 10, are the nozzles already adjusted there? I look at the whisk, but the thread in it is not completely screwed in, and the k-nozzle also

The hook cannot be adjusted, the whisk and the K-nozzle are possible and even necessary. The carving is not completely - it should be. Instruction to 020, page 157.

Maya, thanks, I know what needs to be adjusted, it was just embarrassing that the thread is not fully screwed in, and the splash cover should not sit tightly? so it should be?

[Natali S]

Natali S, Natus, I congratulate you on your twenty! Let Kenka serve for a long time and do not know wear and tear!
No, Natus, the lid sits well there. Doesn't dangle.
And with a thread? ... I, in my opinion, all the nozzles are not completely twisted.

[Natalia]

Girls, and who has ken 20 or 10, are the nozzles already adjusted there? I look at the whisk, but the thread in it is not completely screwed in, and the k-nozzle also

Natalia, I have 010, I lowered the whisk and K-nozzle, did not touch the hook. And the lid initially held very weakly, indeed, if you touch it without a bowl, it flies off easily.

I also have a loose lid.

When kneading dumplings dough, I opened the blender slot - it did not spin. It turns out when I just put the blender on - will it start working? They told me in the store that supposedly it is possible at the same time ...

Well, as they said correctly, you can't do it according to the instructions. and it makes no sense in general.
but about the rotation, it's strange, everything is spinning for me, today I checked it and the machine is also outraged that too much is open. Have you been indignant?
I really have a completely different model, but the principle of operation should be the same. It is better to call the help desk, suddenly the marriage must be changed.

Girls!! And a bowl for Kesha came to me !! So cool!! Thick plastic !! Very cool!!

[Zhenya]

Zhenya, Thank you!!
Well, just run to measure))

Here is my kesha with a new suit, white))
As a native got into the grooves)


And I put on the K-nozzle, and it is clear that nothing needs to be regulated !!
Cool !!


I'll knead bread in this bowl)

Added on Monday 15 Aug 2016 02:40 PM

Natusichka, in Germany on Amazon ordered.

Can't it be used with convection?

with induction, i.e.?
it just won't even work. And so I also want such a cup, for biscuits, soufflé, so that it is easier to lift.

[Natusichka]

Natusichka, then 37 euros with delivery in Germany.

Only knead the dough in it, but you can't make it, it's plastic)
Oksana has already written)

[Mashun]

Mashun, Congratulations. Great update!
I would look and look at Kenek in any clothes all the time.
Natusichka, only the native bowl is suitable for induction. There is also cheaper steel, but again, it is only for mixing without heating.

Having bought a new car, they began to read the instructions (which they did not do since the last one). We learned a lot of new things. It turns out that you can wish for a good puree with the nozzle. We tried it, and indeed. The main thing is not to beat. That is, do it at low speed and not too long.Puree is wonderful.

Added Monday 15 Aug 2016 02:42 PM

At first there were doubts - but it turned out to be an airy puree, no stickiness

If you increase the speed or duration, gluten begins to appear.

[Paul I]

Paul I, as it seemed to me from the descriptions of the girls, the bowl from the ice cream maker and just the bowl are different!
Under mine, you do not need to adjust the nozzles, everything is the same as in steel, put it on and use it. It does not shake it anywhere, it fits perfectly into the grooves. Thick plastic.

Today I kneaded bread in it, it was perfectly kneaded and the bowl stood rooted to the spot)
and here is the bread)



did not cut, hot yet)

[Paul]

Paul, arranged in a rattan or rattan proofing basket)

Well, from the ice cream maker, you need to adjust both the whisk and the K-nozzle.

Hurray, now I also have Kesha. I bought in M ​​Video sens 5030 with attachments (2 glass bowls, mini grinders, a sieve, a citrus juicer, a cube cutter) for 34 tons. p came out. I called 2 times to Kenwood about the fact that the store offers a limited list of nozzles, made an appeal and promised to call back, but I got tired of waiting for a call and we went to the store, and there they immediately said without any questions take what you need, even 2 nozzles from Moscow ordered and made under the order in the check. I'm happy now

[ARLEI]

ARLEI, In the instructions for the bowls that I ordered, it is written that the glass bowl with a lid KAT550GL are intended exclusively for kitchen machines of the KVC50 (Shef) type. And on the site there is also a 2nd bowl AT550-designed for use only with Shef food processors. This is written in the instructions, in the har-x it is not written to which machines it fits.

Girls !!!! Please tell me! I want a kitchen car for my birthday ... I have already re-read a lot of information - my head is spinning ... I even drew a plate according to different models: "what I need" - "what is." You need a juicer, dice, blender. I came to the conclusion that it is better to buy "naked" as much as possible - to acquire what is needed. I think Kenwood 020. But for the price on some sites over 70 thousand, on others - 36 thousand ... where's the catch? on which sites did you buy ??? YOU ARE WELCOME!!!!

on some sites over 70 thousand, on others - 36 thousand ... where's the catch?

Elena, IMHO, now the prices are set simply by someone who goes for what. Find stores where it will be cheaper, taking into account delivery, choose a store with normal reviews and buy in peace.

When I bought, I chose the cheapest one that I could find)) And everything is fine!

[Elena]

Elena
The right approach

it is better to buy "naked" as much as possible - to acquire the necessary.

on some sites over 70 thousand, on others - 36 thousand ... where's the catch?

Promotions / discounts. Sometimes white / gray.
Most buy where it is cheaper.
Happy shopping!

It was not the girl who answered.

Elena, there is already a blender at 020. For the price, don't worry, take it where it is cheaper, I bought it for 30,000 at the end of August, someone managed to buy it even cheaper, everywhere it cost from 45 to 60 thousand. Or take part in an action where Sens is given for the nozzles, as if in the M-video it is now taking place.

[Elena]

Elena, I wish you a Happy Birthday!
Health, Happiness, Good Luck!
Let everything come true and work out!
I agree with all those who unsubscribed above. Don't be afraid or worried about the white and gray delivery. Kenwood kitchen machines have a 5-year Iron Warranty. I think that many people bought exactly where it was cheaper.
I'm also looking for 020 to be cheaper. I am guided by the Market.
At the weekend I saw it for 32 thousand, yesterday it was already from 32900, and today it is in general from 39900.
Probably, it was necessary to take it for 32 thousand.
Or this is how MarykaMaya writes to Sense to buy for baits. No longer a gift, but a gift will turn out. A full-fledged machine with a bunch of attachments!

[Rituslya]

Rituslya, are you going to buy another one? Or are you all looking for a gift for a colleague?

[Olik]

Not at all,Olik, I don't need the second one, if only for free.
I would have it for free, but I would have adapted it for spare parts.
Yesterday I wanted to order an additional bowl with a whisk through the service, so the price is 10500 and 3800.

We are looking after this gift.

[Rita]

Rita, Rita, did you get your soufflake? Or have I missed this moment?

[Irish]

Irish, received a week ago.
Only you think that I managed to apply it in business?
Nope. So it lies in the box once taken out. And then only to show her husband and daughter.

[Rita]

Rita, well done! Sister!

[ARLEI]

ARLEI, In the instructions for the bowls that I ordered, it is written that the glass bowl with a cover KAT550GL are intended exclusively for kitchen machines of the KVC50 (Shef) type. And the site also has a 2nd bowl AT550-designed for use only with Shef food processors. This is written in the instructions, in the har-x it is not written to which machines it fits.

The KAT 550 GL bowl is suitable for your machine sens 5030. In general, a book is included with the car, where a description of the car and a very descriptive description of each nozzle and bowl that fits the sens. Even in brackets are the nozzles that can be used with an adapter. Read carefully, everything is written there in a very accessible language with color pictures

[Margo31]

Margo31, there is a direct prohibition to posting in the Gallery of scans (and photographing printed items is counted as scans).

Elena, I wish you a Happy Birthday!
Health, Happiness, Good Luck!
Let everything come true and work out!

Oh thanks!!!!

Girls, thanks for the help !!!! prices for this car are growing by leaps and bounds ... a day or two and everywhere 70 will be

[Homemade cheese in the Kenwood 086/096 Kitchen Machine, with induction. From grocery stores.]

Homemade cheese in the Kenwood 086/096 Kitchen Machine, with induction. From grocery stores.
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=377544.0

The cost price is ~ 378r / kg.