Vitek VT-4278. Description and characteristics of the multicooker |
|
Technical characteristics of the multicooker Vitek VT-4278Accessories Plastic steaming tray, measuring cup, ladle, spatula Description of the multicooker Vitek VT-4278The VITEK VT-4278 multicooker is indispensable where there is no full-fledged cooker, for example, in the country. But even in the home kitchen, she will become a great helper that will save your time. Eight of the most popular programs make it easy to prepare a wide variety of dishes - from cereals and steamed dishes to roasts and pastries. The multicooker will do almost all the work by itself - you just have to put the necessary ingredients in the bowl and choose the appropriate program. The five-liter bowl makes cooking easy for the whole family, while the two-layer Teflon lining and automatic temperature control keep the food from burning. A distinctive feature of VITEK VT-4278 BK is the case, the design of which successfully combines silver metal and black plastic, which not only makes it easy to clean, but also turns it into one of the most stylish accessories in the kitchen. The main purpose of the multicooker is fast and high-quality cooking.
1. Case 2. Control panel 3. Cover 4. Cover open button 5. Carrying handle 6. Steam outlet and steam valve 7. Tank for collecting condensate 8. Socket for connecting the power cord 9. Bowl 10. Steaming tray 11. Measuring cup 12. Ladle 22 "> Control Panel 13. Display and indicators of operating modes 14. On / Off button / Heating mode 15. "MENU" button 16. Buttons for setting the cooking time "-", "+" 17. "Delayed start" button ATTENTION! For additional protection, it is advisable to install a residual current device (RCD) in the power supply circuit with a rated operating current not exceeding 30 mA; to install an RCD, contact a specialist. Security measuresBefore using the appliance, please read these operating instructions carefully and retain them for future reference. Use the device only for its intended purpose, as described in this manual. Improper handling of the device can result in damage to the device and damage to the user or his property. • Before using the device, carefully inspect the power cord and the power cord connector located on the device body, make sure that they are not damaged. Do not use the appliance if the power cord or power cord plug is damaged. • Before switching on the device, make sure that the mains voltage corresponds to the operating voltage of the device. • The power cord is equipped with a "Euro plug"; plug it into an electrical outlet that has a good ground connection. • When connecting the device to the mains, do not use adapters. • Make sure that the power cord is firmly plugged into the connector on the device and into the power outlet. • Use only the supplied power cord and do not use the power cord from another device. • Use only the removable parts that are included in the delivery. • Place the device on a flat, heat-resistant surface, away from moisture, heat and open flames. • Install the device so that the electrical outlet is always easily accessible. • Use the device in a place with good ventilation. • Do not expose the device to direct sunlight. • Do not place the appliance in close proximity to walls and furniture. • Do not allow the power cord to touch hot surfaces or sharp-edged furniture. Avoid damaging the insulation of the power cord. • Do not touch the power cord or power plug with wet hands. • Do not immerse the device, power cord and power plug in water or any other liquid. • If the appliance falls into water, immediately disconnect it from the mains by unplugging the mains plug from the mains socket. In this case, do not put your hands in the water under any circumstances. • For further use of the device, contact an authorized (authorized) service center.
• Do not insert foreign objects into openings or between parts of the device. • Make sure that no edges of clothing or foreign objects get caught between the cover and the body of the device. • Do not leave the device unattended; if you are not using the device, turn off the device and unplug it from the mains. • To avoid scalding, do not lean over the steam outlet. Be extremely careful when opening the lid of the multicooker during and immediately after cooking. Risk of scalding from steam! • When using the device in the "Fry" program, to avoid scalding by splashing hot oil, do not lean over the multicooker bowl. • Do not leave the lid of the device open during operation, except for the "Fry" program. • Do not touch the surface of the lid during operation of the multicooker; you can open the lid only by pressing the button for opening the lid of the multicooker (4). • To avoid scalding from hot steam, use extreme caution when opening the lid of the multicooker. • Keep the steam outlet and steam valve clean and clean if dirty. • It is strictly forbidden to use the appliance without an installed bowl, do not turn on the multicooker without food and without a sufficient amount of liquid in the bowl for cooking food • Do not use multi brew if there is damage to the silicone gasket on the inside of the lid. • Follow the dry and liquid volume recommendations. • Do not remove the bowl while the device is running. • Do not cover the multicooker during operation. • Attention! When steaming food, keep an eye on the liquid level in the bowl, add water to the bowl as needed availability. Do not leave the device unattended! It is forbidden to carry the multicooker during operation. Use the carrying handle after unplugging the device from the mains, taking out the bowl of food and letting the multicooker cool down. During the operation of the multicooker, the lid, the bowl for cooking food, as well as the parts of the body are very hot, do not touch them, if necessary, remove the hot bowl, use oven gloves. Clean the instrument regularly. For the safety of children, do not leave plastic bags used for packaging unattended. Attention! Do not let children play with plastic bags or wrapping films. Danger of suffocation! Do not allow children to touch the device or the power cord while the device is in operation. Do not allow children to use the device as a toy. During operation and between work cycles, place the device out of the reach of children. The device is not intended for use by persons (including children) with reduced physical, mental or mental capabilities or lack of experience or knowledge, unless they are supervised or instructed to use the device by a person responsible for their safety. To avoid damage, transport the device only in its original packaging. Do not use the device if the power cord or the power plug is damaged, if the device operates intermittently, or after the device has been dropped. Do not repair the device yourself. Do not disassemble the device yourself, if any malfunction occurs, or after the device has been dropped, unplug the device from the electrical outlet and contact any authorized (authorized) service center. • In order to protect the environment, after the end of its service life, do not dispose of the device with household waste, but take the device to a specialized collection point for further disposal. • Store the device in a cool dry place out of reach of children and people with disabilities. The device is intended for domestic use only Cup Rules (9)• Use the device and its parts strictly for their intended purpose. Do not use the bowl for cooking food, placing it on heating devices or hobs. • Do not replace the bowl with another container. • Make sure that the surface of the heating element and the bottom of the bowl (9) are always clean and dry. • Do not use the bowl as a mixing container. Never grind food directly in the bowl to avoid damaging the non-stick coating. • Do not use the bowl if it is deformed or if the non-stick coating is broken. • Never leave or store any foreign objects in the bowl. • When cooking food in the bowl, stir only with a plastic ladle (12). • Do not use metal objects that could damage the non-stick coating of the bowl. • Before choosing a cooking mode, make sure that the bowl is installed correctly. • When preparing food with herbs and spices, it is recommended to wash the bowl (9) immediately after cooking. • After finishing cooking, to avoid damaging the non-stick coating, do not place the bowl (9) directly under cold water, let it cool down first. • The bowl (9) is not dishwasher safe. Before first useAfter transporting or storing the device at a low temperature, keep it at room temperature for at least three hours. - Remove the device from the packaging, remove all packing materials and any stickers that interfere with the normal operation of the multi brew. - Place the multicooker on a flat, heat-resistant surface, away from all kitchen heat sources (such as a gas stove, electric stove or hob). - Install the device so that there is a distance of at least 20 cm from the wall to the multicooker body, and the free space above it is at least 30-40 cm. - Do not place the device in close proximity to objects that could be damaged by the high temperature of the escaping steam. Attention! Do not place the device near bathtubs, sinks or other containers filled with water. - Open the cover (3) by pressing the button (4). - Wash all removable parts - bowl (9), steaming tray (10), ladle (12) and measuring cup (11) - with a soft sponge with a neutral detergent, rinse with running water and dry. - Wipe the body of the device (1) with a damp cloth and then wipe dry. Using a multicookerAttention! • Never leave the operating device unattended. • When using the multicooker for the first time, a foreign smell from the heating element may appear, this is permissible. • Before starting cooking, make sure that the multicooker lid is tightly closed. • To avoid getting burned, be careful when opening the lid (3), do not bend over the steam outlet (6) while the multicooker is in operation, do not place any open parts of your body over the bowl (9)! • Check the readiness of the food during the cooking process, stir the food with a plastic spoon (12) if necessary. Do not use metal objects that could scratch the non-stick coating of the bowl (9). • Do not leave the plastic ladle (12) inside the bowl. Place the food in the bowl (9) according to the recipe (see the recipe book). Note: Make sure that the volume of ingredients together with the liquid does not exceed the maximum level mark "8" and is not lower than the minimum level mark "2". General example of laying food and water (rice is considered as an example) Measure out the rice with a measuring cup (11) (about 160 g of rice in one measuring cup), rinse the rice and place it in the bowl (9). The water level required for a certain amount of rice (measured in cups) is indicated on the scale inside the bowl (9). Pour water up to the appropriate mark. Example: After adding four measuring cups of cereal, pour water up to the “4” mark. For liquid cereals, we recommend using rice and water in a 1: 3 ratio. Place the bowl (9) in the working chamber of the device. Make sure that the outside of the bowl is clean and dry, and that the bowl itself is installed without distortion and firmly in contact with the surface of the heating element. Notes: - do not use the bowl (9) for washing cereals or cut food in it, this may damage the non-stick coating, - make sure that there are no foreign objects, dirt or moisture in the cooking compartment and on the bottom of the bowl (9), - wipe the outer surface and the bottom of the bowl (9) dry before use, - there is a temperature sensor in the middle of the heating element. Make sure that nothing interferes with the free movement of the sensor. • if you are cooking food with steam, pour water into the bowl (9) so that the boiling water does not touch the bottom of the tray (10). Place the food in the tray (10) and place it in the bowl (9). • Close the cover (3) until you hear a click. • Insert the plug of the power cord into the socket (8) and the plug of the power cord into an electrical outlet. The main functions of the multicookerTurning on the multicooker (standby mode)- After connecting the multicooker to the electrical network, you will hear a short beep. - Start multi brewing by pressing the button (14), the display (13) will show “”. - The device has entered standby mode and is ready for use. Note: - pressing each button is accompanied by a short beep. Selecting a cooking program and starting it- In standby mode, to select a cooking program, press the "MENU" button (15). - Programs are selected in the following sequence: "Porridge", "Pilaf", "Steaming", "Frying", "Stewing", "Baking", "Soup", Rice ", while the cooking program indicators on the control panel will light up one by one (2). - The display (13) will show flashing numeric symbols representing the default cooking time. - After selecting the desired cooking program and setting the cooking time, the display (13) will show flashing cooking time symbols for 10 seconds. - After 10 seconds, the cooking program will start, the digital symbols of the cooking time will light up constantly, the countdown will start until the end of the cooking program (see the table "Cooking programs and their duration").
Note: - data on cooking times are for guidance only. - the result of cooking food in automatic programs depends on the amount of food and the amount of added liquid, as well as the temperature of the food. - the temperature of food before cooking should be approximately 20-25 ° C. - setting the duration of the cooking time is not available for the "Rice" program. - watch the rice as it is cooked, if necessary stir the rice with a plastic ladle (12). Changing the running time of a cooking program- After selecting a cooking program, the display (13) will show flashing numeric symbols for the default program run time. - To change the running time of the program, press the buttons (16) "-", "+". - After changing the time of the program, after 10 seconds the multicooker will turn on, the digital symbols of the time will glow constantly and the countdown will begin until the end of the program. Note: - setting the cooking time is not available in the "Rice" program. Canceling the selected cooking program- To cancel the selected cooking program during the program setting, press the button (14) once, the multicooker will go into standby mode, continue the selection of the cooking program by pressing the “MENU” button (15). - To cancel a cooking program while the set program is running, press the button (14) once, a long beep will sound and the multicooker will turn off. End of a cooking program- After the end of the cooking program, 10 short beeps will sound, the display (13) will show the digital symbols "0:00". - Depending on the selected cooking program, the device will automatically switch to the keep warm mode, and the heating function indicator in the button (14) will light up. - To end the cooking program, press the button (14) once, a long beep will sound and the multicooker will turn off. Keep warm function- After completing certain cooking programs, the multicooker will automatically switch to maintaining the temperature, while the display (13) will show the digital symbols "0:00" and the indicator of the heating function in the button (14) will light up. - The operating time of the keep warm function will be shown in digital symbols on the display (13). - The maximum operating time of the temperature hold function is 12 hours. - The temperature of the temperature maintenance function is 65-8СГС. - To disable the keep warm function, press the button (14) once, a long beep will sound and the multicooker will turn off. Note: - despite the fact that the device maintains the temperature of the prepared food up to 12 hours, it is not recommended to leave the cooked food in the multicooker bowl for a long time, as this can cause food spoilage. - the keep warm function works in all cooking programs, except for the "Fry" program. Delayed start functionUse this feature if you want postpone the start of cooking for a certain time. - To set the delayed start time, in standby mode, press the button (17), while the display (13) will show flashing numeric symbols of the delayed start time (by default 30 minutes) and the delayed start indicator in the button (17) will light up. - By pressing the buttons (16) "-", "+" set the required time before cooking (possible setting time 0.5-15 hours). - After setting the delayed start time, press the "MENU" button (15) to select the cooking program, after 10 seconds the flashing digital symbols of the set delayed start time will stop flashing and will remain on continuously,the countdown of the delayed start time will begin and the indicator in the button (17) will light up. - When the delayed start time has expired, the multicooker will turn on and start cooking food in the set cooking program. - To disable the delayed start function, press the button (14) once, a long beep will sound and the multicooker will turn off. Note: - the delayed start function is not works in the programs "Frying" and "Baking". Cleaning and maintenance• Unplug the power cord from the electrical outlet and let the device cool down. • Remove the condensate collection container (7) as it is full, pour out the accumulated liquid from it. • Remove the steam valve (6) from the cover (3) upwards. • Disassemble the steam valve (6), hold the valve (6) by the bottom with one hand and turn the top of the valve counterclockwise with the other hand. • Rinse the valve (6) with warm water with the addition of a neutral detergent, dry it, assemble the valve (6) and place it in the cover (3). • Wipe the body (1) and cover (3) with a slightly damp cloth, then wipe dry. • Wipe the cover (3) from the inside, pay attention to the condition of the silicone gasket, if any defects are found in the gasket, stop using the multicooker and contact the service center to replace the gasket. • Rinse the bowl (9), steaming tray (10), measuring cup (11), ladle (12) with warm water and a neutral detergent, rinse with running water and dry. • Do not put the bowl (9) in the dishwasher. • Wipe the surface of the heating element (only when it is cold) with a soft dry cloth, under no circumstances let water or any other liquid get inside the multicooker body. • Do not immerse the multicooker body, power cord and power plug in water or any other liquid. • Do not use abrasive cleaners or solvents to clean the multicooker and accessories. Storage• Disconnect the multicooker from the mains, wait until it cools completely and clean the multicooker. • Store the device in a cool dry place out of the reach of children. Contents of deliveryMulticooker - 1 pc. Bowl - 1 pc. Steaming tray - 1 pc. Ladle - 1 pc. Measuring cup - 1 pc. Instruction - 1 piece
|
| Vitek VT-4281. Description and characteristics of the multicooker | Vitek VT-4279. Description and characteristics of the multicooker |
|---|
New recipes
