shuska
I see the last photo with the "great". But the previous 2 - no (writes: the image cannot be shown, because it contains errors)
CheBuRashGO
Yeah, bike, 2-wheeled
You are not still confusing! :-)
I seem to have this unit for intimate games? No?
Well, if you take it to read with these black circles and it is so unbearable to squeeze! :-)
It cannot be that this device was current for garlic. It was definitely bought in the IntiMDoma store / mazakhism on the street :-)
ahahahaha

Hello hello :-) I'm glad to hear / see you too :-)
As soon as I arrived, I went to my native hermitage Museum Auchan.
so to speak the origins yes ..
I ate a shokladka there under the cameras in the surveillance video, showing a fig to the camera and bought a pad at a pad sale!
I love my homeland :-)
dopleta
shuska, sent in a personal. And the second photo is a double of this.
Che, well, that's just appeared, we will not have time to rejoice at you, but you will zagreem again! Well, be patient, do not run up, eh? For us loved ones ...
shuska
Quote: dopleta

shuska, sent in a personal. And the second photo is a double of this...
I saw everything. Thank you!
And the one that cuts with plates, do you have Chinese? I saw one on Ali, but I'm afraid that the quality will not be very good (like a lot of things Chinese).
And I understand that you are not advising that cutter like a nice-size cutter that I showed ...
And then how to cut the garlic into cubes? (super-duper genius garlic does not count. Finding it, and even with delivery, is impossible ((
it 🔗apparently not an option either?
elenvass
shuska, press from Joseph-Joseph all-metal
shuska
Does he give cubes? I thought that there would be "cylinder worms"
dopleta
Quote: shuska
who cuts with plates, do you have Chinese?
You see, I bought it here, and he has the US barcode, although outwardly it is absolutely the same as in Ali!
About this 🔗 I can't say anything - I didn't use it. But if you are ready, as you wrote above, to cut off each squeezed portion of cubes with a knife, then look for such a rarity from someone - an old Soviet press, it cost 2 rubles

Presses and choppers for garlic, garlic press and garlic cutters

No, no, Joseph doesn't have cubes!

Presses and choppers for garlic, garlic press and garlic cutters
shuska
Quote: dopleta

You see, I bought it here, and his barcode is USA, although outwardly it is absolutely the same as in Ali! ..
I'm afraid the Chinese version will be much worse than yours.
Vasilica
Joseph did not go with me, his holes are large, but I like smaller ones.
dopleta
Vasilika, so you can walk on the already crushed one again with a rocking chair! And more, and more, and - as much as you want! Straight, until the porridge is homogeneous.
Vasilica
No, it's easier for me once a garlic press in borscht, salad, etc.
Pakat
Presses and choppers for garlic, garlic press and garlic cutters
Best chopper for garlic, dice.
And if you put the large grate on the right, it cuts into slices ...
shuska
Ehhh, how ugly it is to tease! You won't find her anywhere with fire
Babushka
Agree with Packom, cutting is super. Favorite!
Piano
Quote: shuska

Ehhh, how ugly it is to tease! You won't find her anywhere with fire

It seems that they were and are ... I ordered but have not yet arrived - it hangs at the customs ... 🔗
shuska
I went to torture you in a personal))
Lettera
Quote: dopleta

No, no, Joseph doesn't have cubes!

Presses and choppers for garlic, garlic press and garlic cutters
Larissa, how much did you buy it? I saw it in Helsinki for 19.90, did not buy it, hoped to find it cheaper, didn’t find it and where I saw it, I didn’t get there anymore. Is this a normal price?
Rita
Everything from Joseph is precious
dopleta
Quote: Lettera
Larissa, how much did you buy it?
Lena, so in fact mine has long been bought and bought in Holland. I at the same time here for the first time I told about it. But last year I saw him in Lapeenranta for only 8 euros, I also wrote about this here, and even posted a photo with a price tag. Perhaps there was a sale, I don't remember.
Song
Quote: dopleta
in Lapeenranta for only 8 euros
Is this really possible?
Pakat
Quote: shuska

Ehhh, how ugly it is to tease! You won't find her anywhere with fire
Presses and choppers for garlic, garlic press and garlic cutters
People, if they want, find ...
And I have this garlic cutter, the head is trimmed with hard, red rubber,
sits in his hand like a glove and never slips ...
shuska
Quote: Pakat

People, if they want, find ...
And if people cannot find, then other people help
Lettera
Quote: dopleta
ena, so in fact mine has long been bought and bought in Holland. It was then that I spoke about him here for the first time. But last year I saw him in Lapeenranta for only 8 euros, I also wrote about this here, and even posted a photo with a price tag. Perhaps there was a sale, I don't remember. More details: https://Mcooker-enn.tomathouse.com/in...ion=com_smf&topic=22034.0

Thank you!
Here I was tormented by vague doubts that the 20s were too expensive. I hoped to find it for 10, then I would take it for myself and as a gift. And then in the center, in general, over the 25th I met

And then I climbed and found for some reason 2 such crushers, both metal
🔗
1199 RUR
🔗
999 RUR
It seems that they have already written about them here. The second, it seems, is smaller

celfh
Quote: Song *
I also want Joseph metal ... for a long time ...
Who's in the way?
🔗
Oh, I'm not the only one here with a proposal)))
Natalishka
In the near future, the garlic press was thrown. will appear on Ozone (800 rubles with kopecks).
Piano
promotion until 16-00 on a boat joseph-joseph in Ukraine

🔗

shuska
dopleta, Laris, explain, pliz, how do you get squeezed garlic out of this garlic mold? And then I bought it, but I don’t make friends with her yet. Well, I gathered garlic with a spoon inside, but how to clean the holes? And then half of the garlic remained in them, I already knocked and picked - there was no sense. I had to do it the old fashioned way, I couldn't even clean it with a toothbrush without a brush
Presses and choppers for garlic, garlic press and garlic cutters
kirch
Here I have the same
Irgata
Quote: shuska
Well, I collected the garlic with a spoon inside, but how to clean the holes? And then half of the garlic remained in them, I already knocked and picked - there was no sense.
half of the garlic remaining in the holes is tapped off, in the middle, where the holes are larger, and I quickly pass along the edges with a toothpick, everything is well pushed, and I wash it with a small brush too, but also - it is advisable to thoroughly clean the cloves from a thin transparent film - it does not release garlic from holes
Irgata
Presses and choppers for garlic, garlic press and garlic cutters Presses and choppers for garlic, garlic press and garlic cutters = twisted and cleaned the holes

The Garlic Press is a beautiful and bright tool for mincing garlic. It has a simple, uncomplicated and very convenient design that works like a lever. By connecting the handles of the tool, the press presses on the bowl, which contains the cloves of garlic. As a result, the garlic is squeezed out through the holes, leaving the thin skin in the bowl. Fast and practical!

Made of high quality stainless steel.
Non-slip rubberized handles.
Equipped with a self-cleaning system.
Elegant and stylish design.
Maximum attention to every detail.
Easy to clean, also dishwasher safe.

The "Garlic Press" has a self-cleaning function that removes garlic residues from the holes: just turn the handles backwards and connect them. Very convenient and saves time!

Size: 7 x 18 cm.
Brand: Trudeau, Canada.

🔗

Pakat
Presses and choppers for garlic, garlic press and garlic cutters
Somewhere in Amerka ...
🔗
dopleta
Quote: Irsha
and here's another - it is advisable to thoroughly clean the cloves from a thin transparent film - it does not release garlic from the holes
That's it, I also wrote about this - well-peeled garlic is pressed without problems. If it is fresh and elastic, then when the spoon moves, these garlic "worms" (forgive me for the unappetizing comparison) are completely pulled out of the cells with this spoon. Girls, I don’t know what’s the matter, but my holes are hardly clogged at all, in any case, I didn’t have to use a toothpick or a brush - a stream of water from the tap was enough. Maybe the material of the cutting board plays a role? For example, for a glass or other very rigid board, the area of ​​contact with the edges of the cells will be less than that of one that will be slightly pressed, for example, a wooden one, that is, it works worse on a rigid one. These are my assumptions. But I have no complaints about this to the press. Here, I have already shown Luda-kirch in "small things" how my garlic chokes

Presses and choppers for garlic, garlic press and garlic cutters
dopleta
Quote: Karalevna

Girls, I bought this garlic press:
... So I have a question, probably, for Larisa: that part of this press that cuts with stripes, should it be removed? If not, how then to use this black part?
No, Olesya, she must not be removed! It serves as a press for garlic slices, like this:

Presses and choppers for garlic, garlic press and garlic cutters

And the black detachable part is a cleaner: the part with "pimples" cleans the chopping compartment

Presses and choppers for garlic, garlic press and garlic cutters

And with the flat side, you can scrape off the remnants both from the outside and from the inside of this compartment and clean the slots of the slicer, if suddenly something remains there:

Presses and choppers for garlic, garlic press and garlic cutters
Karalevna
Thank you, thank you very much, Larisa! But it would be better if this black spare part crawled into the part of the press that needs to be cleaned! Then the whole clove would go into action!
dopleta
Quote: Karalevna
Then the whole clove would go into action!
Olesya, and who forbids you to shake out this part, squeezed out by the "cleaner" inside, "into action"?
dopleta
Guys, everyone who hasn't bought my vaunted garlic press from # 235 yet - stop! I take my words back! Here's what just happened to her in my hands:

🔗
Piano
sorry .... domestic garlic was too tough?
Song
And I have it just in the basket, pickled ...
Pakat
Lorik, and I wrote cho ...
How many levers I have broken, now I only use Genius and Josef ...
kirch
I feel to use me until the end of my Soviet
dopleta
Well, I didn't expect this from aluminum! My husband says there is a lot of silicon in him ... Pakat, I Joseph, too, as you know, have long been in love. And Genius - no, I don't want to.
Piano
I also boast ... I bought myself, but the strength is not enough, now this garlic press is my husband's favorite

Presses and choppers for garlic, garlic press and garlic cutters

her plate leans back for ease of washing, but it cannot cope with one clove - at least three are needed, and squeezes out very finely, smaller than usual, here is more

🔗
dopleta
Quote: dopleta
who hasn't bought my "vaunted" garlic press from # 235 yet - stop!
I bought another one.
Pakat
Do you want to break them to the end?
Crochet
But does anyone already have such a thing?

Garlic cutter Leifheit "Proline"

Presses and choppers for garlic, garlic press and garlic cutters

Leifheit "Proline" garlic cutter is made of plastic and stainless steel. The device is designed to squeeze out the entire clove of garlic. Simply place the clove on a flat surface and press down with the appliance (stainless steel side). The garlic is chopped quickly, and you don't have to put in a lot of effort.
The Leifheit "Proline" garlic cutter will be the perfect addition to your collection of kitchen accessories.
dopleta
I read two opposite reviews about her, and it seems we both have.
natushka
Quote: Krosh
The garlic is chopped quickly, and you don't have to put in a lot of effort.
It chops just badly, but a lot of effort is needed, the garlic scatters on the board, though a little, but it does not choke. Is it only suitable for men with their strength .. The holes are small, the edges are very blunt, you can knock on the handle with a hammer, so it will split. I didn't like it very much.
Ipatiya
Quote: Vanya28

This is still possible from IKEA, completely opens for washing, which is very convenient!
Presses perfectly, the container for garlic is large, it does not squeeze out over the edges,
very durable.
Presses and choppers for garlic, garlic press and garlic cutters Presses and choppers for garlic, garlic press and garlic cutters

Thank you! It turned out to be very convenient!
Pichenka
Quote: Krosh

But does anyone already have such a thing?

Leifheit "Proline" garlic cutter [/ bPresses and choppers for garlic, garlic press and garlic cutters
I can't say anything bad. Really like. When I bought it, I did not like the metal Joseph, you can see them 2 modifications of different sizes. The genius I have, which is cubed. But every day this crushing machine is used, a grinder and a tiny grater.
So that the garlic chokes normally, I cut it into slices across the fibers. And that's all.
And then I don't just crush, but kind of roll, like on a rocking chair.
natushka
Quote: Krosh
Garlic cutter Leifheit "Proline"
I didn't like it, I crush the old usual one. It is not possible to press whole slices, but to cut them into slices, for which it is then needed.

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers