Other Robot Vacuum Cleaners

It seems to me that you don't need to turn off anything, I must come to the base and go into sleep mode. It will not charge when it is off.

It has been standing for 4 hours with "FULL" burning and it does not enter sleep mode, defective or something I don’t know how to leave it for the night.

It may freeze, try turning it off and on again

It may freeze, try turning it off and on again

Last night I tried it with 3 times went into sleep mode. In the morning I get up, "FULL" is on again. It also does not react to the remote button back and forth in any way, but this is less important, although it is insulting. Really defective. What to do now, there was a joint purchase, and the organizer went on vacation.

That is why, when faced with the problem of repairing something, you start looking for the product for which you can find a service in the city. Or at least so that there is a store in the city that will accept and send it to the service itself. I am looking for a good combination.

It is unlikely that such an RP will be found. They just appear and few people are engaged in their repair. Moreover, not all firms have service centers in Russia like Panda.

I tried to turn it on, nimble, but the cat and the dog ran away with their tails up and then looked around for another hour and nuzzled where he drove

Ahahaha ... Well, nothing, they will get used to it. I, too, would strain a little if such a mechanism settled in my apartment))) Have you at least mentally prepared them for the appearance of RP ???

When choosing a vacuum cleaner, I also paid attention to the panda. I got the impression that this is a clone of the Chinese lilin vacuum cleaner. just on some branches they write about Japanese quality, there is nothing Japanese there. It's kind of called rebranding. I have not used a panda, and I cannot say anything about the quality of cleaning and the device itself. But such marketing gimmicks have discouraged buying it.
Natushka, there should still be a warranty card, try to ask the organizer of the purchase what to do in case of marriage. I think they will.

[urgent]

Girls, if possible, need urgent the answer is - when the panda is fully charged and is on the "FULL" base, should it be on or off?

You at least mentally prepared them for the emergence of RP ???

Stood all evening and half for sniffing. The dog does not react now, when it touches its paws, it leaves. And the cat looks from 3 meters, but if it suddenly turns in his direction, it jumps up a meter and runs away.

Hurray, our vacuum cleaners have arrived.
I'm not sure if it's right or not, but for now I've put my Panda on charge. It is written in the instructions that it takes 5-6 hours to fully charge. So the tests are postponed until tomorrow.

[Katris]

Katris, then share your impressions. I like how it works, but there were some questions.

[natushka]

natushka, I read your questions. Since I had not used robots before, I did not understand anything. But I'm already afraid ...

But I'm already afraid ...

Why be afraid. Just find out and that's it. I asked at the store via the Internet. They said that the Full inscription should be on if the robot is fully charged and stands on the base, but now I still want to check with users.

I was afraid of malfunctions. But so far, it seems, everything is fine. I figured out everything, tried almost all the functions. It remains to check the programming by day of the week. I liked it, the vacuum cleaner is clean enough, it is not very noisy (I thought it would be louder). While we are watching him, we get used to removing what may interfere with him (curtains, chairs, wires).

we get used to removing what may interfere with him (curtains, chairs, wires).

Here they are golden words! Robots are useful not only because they themselves clean up and free up precious time for us. But also because they discipline our households who forget / do not want to collect their toys, sneakers, exercises, etc., etc.

Last night I tried it with 3 times went into sleep mode. In the morning I get up, "FULL" is on again. It also does not react to the remote button back and forth in any way, but this is less important, although it is insulting. Really defective. What to do now, there was a joint purchase, and the organizer went on vacation. More details: https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=105172.0

Natushka, it is better to contact by phone, which is indicated in the warranty card. I think they will tell you something and everything will be decided. This is sometimes the case with new equipment.

What to do now, there was a joint purchase, and the organizer went on vacation.

Did the ogre give you the documents for him? Or how did you do it? Do not be discouraged ahead of time, everything will be fine.

When choosing a vacuum cleaner, I also paid attention to the panda. I got the impression that this is a clone of the Chinese lilin vacuum cleaner. just on some branches they write about Japanese quality, there is nothing Japanese there. It's kind of called rebranding. I have not used a panda, and I cannot say anything about the quality of cleaning and the device itself. But marketing gimmicks like this discouraged buying it. More details: https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=105172.0

femina_alba, please tell me how it happened that exactly the same message appeared on 04/06/14 on this forum under the nickname Lelik 🔗

Are you a spammer?

[femina_alba]

femina_alba, what model do you have? If you don't like the Panda?

[Katris]

Katris, look how you do, when the vacuum cleaner is fully charged and stands on the base, the Full inscription remains on constantly?
call the phone number specified in the warranty card
I turned to them, they said Full should burn constantly if it is charged and is on the base; when the vacuum cleaner is in operation (movement) on the remote control, the forward-backward buttons should not operate. Why does not the indicator of the fullness of the basket show? They said nothing, I specially container yesterday

brought it to full without brushing for several days, though almost one hair, maybe the weight is not enough for indication, but it cleans normally, I like it.

[Katris]

Katris, look at how you do, when the vacuum cleaner is fully charged and stands on the base, the Full inscription remains on constantly?

I have a 320 model. When charging and standing on the base, the charging indicator is on without blinking (blinks during charging). And Full, there is no such option at all.

Here they are golden words! Robots are useful not only because they themselves clean up and free up precious time for us. But also because they discipline our households who forget / do not want to collect their toys, sneakers, exercises, etc., etc.

That's for sure - we have a noble scarecrow Panda))) Although there is not a lot of garbage and things scattered about, it is much more effective with it. So shake your hand!

Stood all evening and half for sniffing. The dog does not react now, when it touches its paws, it leaves. And the cat looks from 3 meters, but if it suddenly turns in his direction, it jumps up a meter and runs away.

I think I'll get used to it over time. What kind of dog do you have? Large?

Today my Panda had a "scheduled cleaning" programmed. He left the base, cleaned up for 2.5 hours, then found the base himself and got up to charge. I'm glad!!!

it is not very noisy (I thought it would be louder).

My old dust was making so much noise that when I was vacuuming for a long time my head began to ache. And Panda is quiet compared to him. Sometimes I don't even notice it.

Girls, well, you give. If she expressed her opinion on two forums, then immediately a spammer. Lelik is me too. We kind of have freedom of speech. Or you need to register on all forums under a nickname. I didn't think that my message would offend anyone.I chose a vacuum cleaner for a long time and wanted to share with other girls what I had dug up. Sorry, I won't. I chose neato xv-21 for myself.

And yet, I didn't really like the panda, I never had it. I didn’t like that it’s not being sold honestly or something. If they sell China, then let China be written.

By the way, there is a big sticker on the box with the inscription "Panda", and nowhere else is there a word about Panda. Well, maybe only on the instructions, which they themselves print out in Russian.
It doesn't smell like Japanese. Although for me the main thing is to work properly.

I think I'll get used to it over time. What kind of dog do you have? Large?

The dog is an average poodle. He does not pay attention to the robot, but when he sees I take out a big one, then it goes to hell. And the cat, on the contrary, is not afraid of the big one, but now little by little it starts to get used to the robot, it looks out from behind the door, and when it stands at the base, it comes up half a meter and sniffs the air.
Girls, how do you clean the curled hair on the front wheel shaft?
And I, too, do not care that the Chinese, cleans well. If earlier it was necessary to vacuum every day, or at least every other day, now it's clean, it's enough to clean and wash once a week.

Now almost all well-known manufacturers of household appliances assemble their goods in China or Russia. How many years ago I tried to find a German-made dishwasher, but I couldn't find it. We took China, it still works. China is not bad. Just look, a lot of money is poured into marketing and it is everywhere. If you go to a hypermarket, it will simply be at every step. Starting from the innocent decomposition of goods on the shelf in a certain way, the location of the shelves themselves with the products, certain smells, sounds, etc. It's all quite peaceful. There are also petty tricks, for example, to reduce the weight of the product, and leave the size of the package the same. Therefore, the product will be cheaper among similar ones on the same shelf. I often came across half-empty curds. Deception, yes, it seems not, but somehow it is not pleasant to agree. Sorry for the offtopic.

I often came across half-empty curds.

brought it to full without brushing for several days, though almost one hair, maybe the weight is not enough for indication, but it cleans normally, I like it.

It's good that everything is all right with you - I'm glad for you. Maybe your dustbin really isn't full yet. I shake it out every day, so we don't even have it on fire. How are your animals to him? Not accepted yet?

How are your animals to him? Not accepted yet?

The dog is not afraid at all, sometimes even a brush will slide over his nose, and he lies. The cat gets used to it little by little, if it leaves the field of view - it follows it, as it seems - it moves away. It is already driving 30cm away from it, so it presses its paws or runs away, it gets used to it.
Today I turned it on, cleaned it for 1.5 hours and went to the base, there was very little garbage. The only thing now I wanted not to follow him, but because of the carpet it is impossible, it gets tangled in the edges, moves, lifts. I wanted to remove it completely, but my floor is very very light linoleum, it hurts my eyes, I regret now that it is not under a light tree.

I turned to them, they said Full should burn constantly if it is charged and is on the base; when the vacuum cleaner is in operation (movement) on the remote control, the forward-backward buttons should not operate.

The instructions say about this full. This inscription means that the battery is fully charged and it means you were told correctly.

Today my Panda had a "scheduled cleaning" programmed. He left the base, cleaned up for 2.5 hours, then found the base himself and got up to charge. I'm glad!!!

Have you tried wet cleaning yet? Share your impressions. Did he really work for you for 2.5 hours? It seems that the manufacturer announced only one and a half.

Have you tried wet cleaning yet? Share your impressions. Did he really work for you for 2.5 hours? It seems that the manufacturer announced only one and a half.

I have not tried wet cleaning. A rag there is some kind of "frivolous" to wash directly. And it can also be used where there are no carpets. And I ran it all over the apartment. But, someday I will try.
He really worked for 2.5 hours. I was surprised too. And the second time also. But I run it at a slow speed, it seemed to me that this is more effective.

But I run it at a slow speed, it seemed to me that this is more effective.

Does he have 2 more speeds? My Panda has X500 -1. And also removed 1h30, 1h45.

Does he have 2 more speeds? My Panda has X500 -1. And also removed 1h30, 1h45.

Yes, the 320 has two speeds. The remote has a "speed" button to switch speeds.

And yet, I didn't really like the panda, I never had it. I didn’t like that it’s not being sold honestly or something. If they sell China, then let it be written China.

So no one says that this is not China, really collected in China. You know how now - the car brand is German, but it is assembled in the suburbs. Nobody says that this is a car near Moscow. This is how it is assembled.

Girls, how do you clean the curled hair on the front wheel shaft?

I unscrew the brushes on the bottom of the Panda, and then I clean. Already adapted. The main thing is not to mix things up. The instructions say about this.

I wanted to remove it completely, but my floor is very very light linoleum, it hurts my eyes, I regret now that it is not under a light tree.

Yes, you have to do something with the rug. Find out about double-sided tape. Maybe it will help.

He really worked for 2.5 hours. I was surprised too. And the second time also. But I run it at a slow speed, it seemed to me that this is more effective.

You have some kind of abnormal Panda caught)))) Everyone has an hour and a half, and you have 2.5. Probably the defective one was caught))))))) I didn't know about gear shifting, to be honest.

Does he have 2 more speeds? My Panda has X500 -1. And also removed 1h30, 1h45.

He's some kind of strange))) I don’t understand why it costs less than the X500. I just can't calm down))) What's the secret?

320 also takes 2 hours for me.

Managers say the X500 is an improved model and breaks less often ...

I have not tried wet cleaning. A rag there is some kind of "frivolous" to wash directly. And it can also be used where there are no carpets.

When you try, tell us about your impressions. It also seems to me that there will be little sense, but at least we will know.

I unscrew the brushes on the bottom of the Panda, and then I clean.

I'm not talking about brushes, about the front wheel, it's not clear how to clean it, you have to hook it up with a needle and pull it out with tweezers.

Find out about double-sided tape.

It does not fit, you cannot clean it under the carpet, stains may remain on the linoleum, and the robot does not climb. I tried to stick very thin cardboard on the back side of the carpet, the brushes get stuck and cannot climb. While I think

Managers say the X500 is an improved model and breaks less often ...

It is clear, but it seems that the functions have more and work for a long time, but it costs less. Well, at the expense of the modified one, probably not quite so, because the Panda X500 is a completely different model, which is fundamentally different from the A320.

It does not fit, you cannot clean it under the carpet, stains may remain on the linoleum, and the robot does not climb. I tried to stick very thin cardboard on the back side of the carpet, the brushes get stuck and cannot climb. While I think

There is a lot of information on this topic on the Internet. I myself have not encountered such a problem, but I decided to drive into the search engine "how to make the palace not bully" and came out 18 thousand results. For example, here's the first result in the SERP 🔗, there are many different ways proposed and about scotch tape as well. In your case, you can try metal plates.And under the carpet I see no reason to clean, as here they have already written the carpet for people for years lies on the entire width of the room and no one cleans under it. Well, maybe there are fanatics who drag him out into the street to knock him out. So look for more, if there is a problem, then you need to solve it.

I'm not talking about brushes, about the front wheel, it's not clear how to clean it, you have to hook it up with a needle and pull it out with tweezers.

Yes, we do not seem to reel much. And when this happens, I cut it off with old nail scissors and that's it. Takes a couple of minutes.

And I cut with a clerical knife. But I love the idea with the old nail scissors. We must try this method on Panda.