Errors appearing on the display of the multicooker cuckoo

[Errors appearing on the display of the multicooker cuckoo]

Errors appearing on the display of the multicooker cuckoo
1. The pan is not inserted.



Solution to the problem: insert the pan into the multicooker
2. Some problem with the temperature sensor



Solution to the problem: contact the service center or contact your Cuckoo dealer
3. Lid closing handle, not turned to the desired position



Solution to the problem: turn the lid closing knob to the closed position
4. The set time exceeds 13 hours



Solution to the problem: the set time will be changed automatically and the display will show "13 NO" when the set time exceeds 13 hours
5. Food is prepared



Solution to the problem: This symbol appears on the display when the food has already been cooked and you have pressed the "Start" button, but you have not yet turned the closing knob to the "Open" position. Turn the lid closing knob to the "Open" position, then you can return it back to the "Closed" position and press the "Start" button to continue cooking

Does anyone know where they have this temperature sensor installed,
otherwise I got my cuckoo and she has this sensor error beeping and burning, but not always,
shake it a little and this error disappears.

I want to get to him and see what's what, maybe the ration fell off where.
The first autopsy did not immediately reveal the problem, and did not fully understand it yet,
I just don’t know where he is, from below, or can it still be in the lid?

I doubt that they would have helped me with something on the phone :) especially since my model is not for sale in Russia

But nothing, I digged it myself for a week, took it apart up and down and found the reason all the same,
a factory defect turned out to be, a small piece of solder formed during soldering bridged two contacts on the control board, but the contact was weak, so the error appeared and disappeared ... now everything is fine)

But now I fully know how it works

Hello. I also received my multicooker from Korea. unfortunately not working - the error "EuF
". There is no such error in the list. There is, of course, no guarantee. The error appears as follows: the device is fully operational, but after 10-15 minutes a failure occurs, this error pops up. Interestingly, the error also appears when the lid is open and the bowl is missing. , what to do, where to watch Model CRP-M1010FR
Thank you.

I found a description of your error!
It is written there:
If EuFsign is appears
It appears when there is something wrong with the internal memory of the microcomputer.