Washer broke again

For the third time in a year and a half. What to do? How to get rid of it?

What model of the car? My LG is broken, it does not heat the water. I don't directly know what to do, if you take it to the repair, you will have to wash it on your hands, and this is not a desire, and two children always have a lot of linen. Or can you continue to wash it cold? I'm right at the crossroads .... Money for a new dumb

[carry]

My LG is broken, it does not heat the water. I don't directly know what to do, if you take it to the repair, you will have to wash it on your hands

Why such a heavy thing carry for repair? Call the master at home. If it is necessary to change the heating element there, but it will not be in the service, then they will still order it and wait. In the meantime, you somehow wash with cold water.

The fact is that in our village you will not find good craftsmen, and those that exist can only break. (there is already a sad experience with the monitor) You need to take a good workshop to the nearest town. The husband will "ring" ten in the evening, I hope that he burned out, this is the most harmless. If not ten, then kick-ass ... In general, the year has begun for us: the monitor burned out, the pump in the well, the oil seal in the car flew, the front bumper drove into the bumper, now there is a washing machine What's next? Probably need to go to church to atone for sins. Does such a leap year ruin?

Sveta, if the ten is burned out so this is an easy business on Lg costs about 100 hryvnia, in any Internet store, and the husband can put it himself, there is nothing complicated

[How to clean a washing machine.]

I received an article on the mailing list on how to clean the washing machine. While reading, I doubted a little, but the last comment to this article made me think. Who understands? Jeffrey, Sasha - Sazalexter, Countryman, just chemists - WHAT DO YOU THINK?

How to clean a washing machine.

Washing machines are used to wash dirty clothes and other items. It can be assumed that the washing machine cleans itself every time the laundry is washed and does not need any further cleaning. However, over time, dirt, soap and mineral deposits accumulate on the plastic and metal parts inside the washing machine.

This is caused by detergents, dirty and hard water. Moreover, these contaminants are located in inaccessible places and are often difficult to dissolve with most household cleaning products. Clean your washing machine systematically, depending on how often you use it, using the following cleaning methods to keep it in good working order for a long time.

Cleaning the washing machine

Pour 2 cups of white vinegar into the washing machine and run a long cycle with hot water without adding any clothes or other detergents. Let the machine run for a few minutes to prepare the solution, then temporarily stop the program to give it time to act on the dirt inside the tank.

After an hour, unpause the washing machine and wait until the end of the wash. Then run a short wash cycle to rinse off any remaining solution. Vinegar will descale the washing machine, remove soap deposits and other contaminants, and help get rid of bacteria and unpleasant odors. You can substitute two glasses of chlorine bleach for vinegar, but it is more toxic.

After draining the water, wipe the inside of the door and the rubber seals around it with a soft cloth dampened with a mixture of equal amounts of water and vinegar. Pay special attention to the seals as they often trap dirty water and various deposits. Then walk over them with a damp cloth and wipe dry.

Using the described method, you can also get rid of the musty smell, which often comes from the washing machine after washing the laundry. And to prevent it from reappearing, sometimes add a glass of vinegar when washing towels and wash them at a high temperature. This will not harm the towels and will help decontaminate them. Baking soda is also great at removing odors, but it is not as harmful to odor-causing bacteria.

Tips and Warnings

1. Clean the washing machine using the suggested method every 1-6 months, depending on the operating conditions.

2. After each use of the washing machine, wipe the inside of the washing machine, door and seals with a dry cloth. Leave the door of the clipper open to allow moisture to evaporate and prevent mold and odor formation.

3. Clean the filter of your washing machine periodically as it can become clogged with debris over time. It is usually located at the lower front of the machine. Place a container under the filter to collect water, then remove and clean it.

Comment:
Hello "TERMINATOR" of washing machines !!! - Acetic acid has a detrimental effect on aluminum parts and rubber! With your help, rubber hoses in 8 months will crumble "like crackers in the broth of a toothless grandmother." and aluminum adapters will melt like candy, while overgrown with white and fluffy fur of aluminum oxide !!!! - GOOD MEN - Comments to the author, most likely he works as a sales manager for washing machines and will look forward to the influx of buyers after his post.

Hence: 🔗

Questions.
1) What is included in special cleaning products for washing machines?

2) There was a long break in using the SM, the washer was not mothballed in any way. As a result, in the place where the container for detergents is inserted (in the depth, when the container was pulled out), there are growths of mold. I suppose that inside the drum, in those places that are not visible to the eye, there was also a fungus. What was the right way to deal with him?

I sprinkled it with diluted Whiteness (bleach), then tied the brush to a stick and, as far as I could get it, cleaned it. After that, I put the SM on the rinse mode, and then ran it off with the powder without laundry in the Boiling mode. I seem to have coped with the problem, there is no musty smell. Maybe it was still possible or needed to somehow solve the problem?

I boil the machine about 2-3 times a year (full cycle) with lemon. Maybe this is not right? But, I've been doing this for 9 years.

Get rid of it according to the "Utilization" program, if you practice them in M. video and Eldorado stores, get a discount (sometimes very tangible) and a new one will be brought in for nothing and the old one will be taken away. I would be glad to get rid of mine, it works loudly, like a tractor, but it is not going to break down, like the same tractor plows and plows, plows and plows without spare parts, lemons and colgate.

1) What is included in special cleaning products for washing machines?

2) There was a long break in using the CM, the washer was not mothballed in any way. As a result, in the place where the container for detergents is inserted (in the depth, when the container was pulled out), mold growths appeared. I suppose that inside the drum, in those places that are not visible to the eye, there was also a fungus. What was the right way to deal with him?

I sprinkled it with diluted Whiteness (bleach), then tied the brush to a stick and, as far as I could get it, cleaned it. After that, I put the SM on the rinse mode, and then ran it off with the powder without laundry in the Boiling mode. I seem to have coped with the problem, there is no musty smell. Maybe it was still possible or needed to somehow solve the problem?

What is in the composition, I will not say for sure, most likely those compounds that are used for cleaning kettles from scale.
With regard to mold, you did everything right.
Regarding Calgon and others like them, I do not use it and will not advise anyone.I use only high-quality powders from P & G in washing and recently "pillows" of their own production, all this already contains "softeners"

[I would be glad to get rid of mine]

Get rid of it according to the "Utilization" program, if you practice them in the M.video and Eldorado stores, get a discount (sometimes very tangible) and a new one will be brought in for nothing and the old one will be taken away.I would be glad to get rid of mine

The thing is, I don't want to get rid of my car. It is too expensive and now I can’t afford a SM of this level financially, but I’m already used to a good one. I don't even consider the option from M-Video or Eldorado. (For now, anyway)

Get rid of it under the "Recycling" program, if you practice such in M. video and Eldorado stores, get a discount

A discount of about a thousand rubles. and take part in the game "how long will the washing machine last before repair"

A discount of about a thousand rubles. and take part in the game "how long will the washing machine last before repair"

Wait for that to fall. : girl_haha: Well, I don't know, if a Bosch machine is 30 thousand-35 thousand, a 20% discount (- 6-7 thousand) is not bad. Usually, what is better is taken apart at the beginning. Not necessarily for recycling, you need to monitor the stock constantly. I bought a smart TV set for the kitchen in M. video - everything has been working for 3 years. Although, of course, the owner is the master.

Regarding Calgon, the master from the service that installed the machine, answered this question that it was CONSTANTLY better not to use it (money wasted). From it, the plastic allegedly deteriorates and the drain hose, and modern powders already protect from scale. There was also a TV program, they said the same thing. But to clean it once a year with a special agent at a high temperature is welcome.

Yes, wait to fall then. : girl_haha: Well, I don't know, if a Bosch machine is 30 thousand-35 thousand, a 20% discount (- 6-7 thousand) is not bad. Usually, what is better is taken apart at the beginning. Not necessarily for recycling, you need to monitor the stock constantly. I bought a smart TV set for the kitchen in M. video - everything has been working for 3 years. Although, of course, the owner is the master.

Asya, I have one. They do not exist in Eldorado and M-Video.

🔗
Built-in washer-dryer Kuppersbusch IWT 1466.0 W white
(only earlier release, the numbers there are different instead of 1466 - 1259)

Well, of course, such a luxury, "what is it about." Just to get rid of the hand will not rise. The master needs a good one, what experts say, why does it break so often?

Well, of course, such a luxury, "what is it about." Just to get rid of the hand will not rise. The master needs a good one, what experts say, why does it break so often?

And it doesn't break. Has been plowing for 10 years. Last year I really changed the bearing that I "killed" by washing the pillows (well, that's what I think). And I wrote in the subject, because the comment to the article claimed that such cleaning of washing machines is "deadly." We simply don't have a special topic - How to care for a washing machine, so I asked in this one. I decided that you advise me to throw out this washing machine because of the fungus.

[How can you clean the powder tray?]

The master also visited me recently. The machine (Bosch, front-end) suddenly stood up - it was collecting water, heating it, draining it, but the drum did not spin. And no error on the display. The master immediately said, "Most likely the bearing flew. It will cost this much." Came to diagnose, removed the back cover - the bearing is intact. He began to look for another reason, the engine "rang", the entire electrical part, except for the electronics - nothing ... he says "I'll have to disassemble and check in the" hospital "(in the workshop)." I assembled the machine and it worked! I actually took money only for diagnostics (from other masters only a visit was twice as expensive). He also said that it is better not to use calgon.

But I didn’t ask him about one thing (I didn’t have time - I had to run to the kindergarten for the child).

How can you clean the powder tray? Over the years of using dry powders, a plaque has formed there that looks like lime, but is not taken by any chemistry, it is not removed mechanically either, and the fungus has specifically sat down on it - bleach no longer helps.

[Rina]

Rina,
Irin, is this tray pulled out completely or not? I have a horizontal, the tray is pulled out - I wash it in the PMM

Is pulled out. Need to try. But I'm afraid that PMM will not help here either (it also "dies" for me - it works halfway). In the washer, the area of ​​the tray also needs to be cleaned (the place where it is inserted).

She pulled out the tray, and there was a nightmare, poured white overgrowth of mold, and sent the tray to PMM

[How can you clean the powder tray?]

How can you clean the powder tray? Over the years of using dry powders, a plaque has formed there that looks like lime, but is not taken by any chemistry, it is not removed mechanically either, and the fungus has specifically sat down on it - bleach no longer helps.

Rina, this tray can be simply replaced. Last year, when I changed the bearing of the washing machine, I asked about this tray. They gave me a new one. Our water is very soft, and there is no limescale, but there is a lot of iron and this container for powder has already become all rough and red. The powder was not always washed off well. They ordered it to me, but they forgot to bring it. The husband then went to the service himself to pick him up. He took it away, but without a master, we were afraid to disconnect the front panel, besides, there was not the entire tray assembly, but only the container itself. The cover for the rinse aid did not sit perfectly in its place, because the company is already undergoing a slightly different modification. In general, this tray lay with me for almost a year, and then I called the master to extract from this service. He detached the front panel and put it on a new tray in three seconds, but he had to tinker with the overlay - they sawed off the plastic so that it sat down correctly. As a result, now the powder is washed off perfectly, the tray is new, slippery. You just need to select the part very accurately. Contact the service, they can help.

I pulled out the tray, and there is a nightmare

That's it, we rarely look there, but in vain. All this fungus is washed off on our laundry. You need to clean and dry the machine more often.

[How can you clean the powder tray?]

How can you clean the powder tray? Over the years of using dry powders, a plaque has formed there that looks like lime, but is not taken by any chemistry, it is not removed mechanically either, and the fungus has specifically sat down on it - bleach no longer helps.

A steam cleaner ... and from plaque and fungus ...

P.S.
And so that the fungus does not start, it is advised not to close the hatch tightly and, most importantly, to process, wash and dry the sealing gum.

That's it, we rarely look there, but in vain. All this fungus is washed off on our laundry. You need to clean and dry the machine more often.

Galina, I occasionally (about 2 times a month) always process the tray with a steam cleaner -. And after washing, I always wipe the door from all sides and keep it open for 2 hours - but it's easier for me ... I don't have an installation.

Galina, I occasionally (about 2 times a month) always process the tray with a steam cleaner -. And after washing, I always wipe the door from all sides and keep it open for 2 hours - but it's easier for me ... I don't have an installation.

Here! But now I know why I MUST need a steam cleaner! Leska,

So I have something with the car. Vertical AEG LAV 41380.

The machine cannot pick up speed during spinning. A couple of times changing the linen helped, today it did not help. What could it be? Somehow this is not at all on time ((

So I have something with the car. Vertical AEG LAV 41380.

The machine cannot pick up speed during spinning. A couple of times changing the linen helped, today it did not help. What could it be? Somehow this is not at all on time ((

Lena, I had this (though the machine is different), the belt flew! The husband replaced him in 20 minutes. Maybe you have this too ...?

[Kamusik]

Kamusik,
Tanya, anything can be. But at the same time she washes normally, she just cannot unwind during the spin cycle.
I'm afraid that my husband will sort it out and then nothing will work at all

But at the same time, it washes normally, it just cannot unwind during spinning.

One to one, it was so! Well, if, and not a husband, then I wrote that you would know that this is sheer nonsense! Masters are also experts to hang noodles on their ears, and you will be grounded!

[Antonovka]

Antonovka, check if the filter may be clogged. Was there not much water in the tank when changing the laundry? If there was no water at the bottom, then only to the service.

[Jefry]

Jefry,
Zhen, there was no water - just unwashed linen

Kamusik,
Tan, I will be grounded I will call for the weekend - I would find a good master

[Jefry]

Jefry,
Zhen, there was no water - just unwashed linen

Kamusik,
Tan, I will be grounded I will call for the weekend - I would find a good master

Ask your friends, neighbors ... Word of mouth is the best informant! Really none of your friends have in mind a boshkavity (even if he doesn't work in the SC) master?

[Kamusik]

Kamusik,
There is no one to ask - the neighbors are all new, and two friends immediately have new washing machines after breakdowns

Help, problems with the car! M. b. there is someone in mind of a master (or you know where it is better to turn), the machine began to behave very strangely, instead of switching from one program to another, it starts to jump in a circle from one program to another. So it circles and circles, barely managed to drain the water to open the machine. What is it with her? So out of place this breakdown, in two years I plan to repair and wanted to change everything, I don't want to buy a new one now.

If there is a mess with programs and actions, then most likely the control board has flown. My machine just stopped turning, that is, in general. At first, one master looked, thought that the bearing, it turned out not. Went through - earned. After a couple of washings, the same "oil painting" again - the drum does not spin. I called a wizard from another company, tested it (pressed some buttons, got an answer on the display, looked in a reference book) - some small detail in the board burned out. I sinned for the presence of cockroaches (if they suddenly appear, then they are just in the washing machine or dishwasher under the casing very, very well), which could have closed something there (right by Lem - the fly closed the contacts in the spaceship). They removed the board and the engine and took it to the workshop. The board was soldered, the engine was rewound.

So I suppose that there is a malfunction in the program, only where would the master find who will correctly "diagnose".

I asked a search on the Internet for "repair of a washing machine Kiev", followed the links, looked at where the prices were adequate (not the lowest, but not the highest, the call of the master is paid separately or included in the cost of the repair). I learned about the diagnostics when the foreman had already arrived - I saw how he was looking through some documents on the phone. I think that when you call, you can ask how the wizard will diagnose a specific model.

All right, my machine is working. already erases. I chose a service center on the Internet, made sure that the address of the service center was real, not only the website page. In the morning, the master came and quickly fixed everything. I asked him to look at everything, if necessary, then change everything to the maximum. He said that the machine is good, everything is in good condition, the reason is in the pump, he immediately replaced it. Left attendances, passwords contacts, if someone needs it, I will share. The service suited me.

Interestingly, the pump is broken, and the machine jumped from program to program?
It's strange ...

Nevertheless, congratulations on the return of the assistant to the ranks!

Thank you!!!
Nevertheless, it turned out that the pump immediately started working.

The kid had a breakdown in the washing machine, the pump refused - I went to call the master ...
He came, looked, the business turned out to be "five minutes", and the reason was banal - a toothpick and a bone in the form of an arch from a bus was stuck
Summary - pockets should be checked before washing

Information for Muscovites
A-ICEBERG household appliances repair service operates in Moscow tel 8-495 723-72-30 and 8-495-783-67-83
Urgent repair of household appliances hectares at home, stores of spare parts for household appliances, warranty repairs, including imported household appliances.

I have been using this company since the time of the king of peas, I have a 10% discount card, they even came to me in Dmitrov.

Let's have a little poll - the presence of an ionizer and mold? What if this ionizer is not only a feature for those who like bells and whistles? I still believe about the destruction of microbes in linen (you can't count them before and after washing), but fungi somehow I can't believe.Although in my case the fact remains that there is an ionizer, there is no mold, but for my colleagues, on the contrary.

I had 3 cars and none of them had mold and I also have no ionizers. I wash the brush tray about once every two weeks.

I had 3 cars and none of them had mold and I also have no ionizers. I wash the brush tray about once every two weeks.

Natasha, did you look deep behind the tray? I, too, seemed to be doing well - everything is easily washed off on the tray itself, but the devil pulled me to look in there - my dear mother! especially in the corner where the balm rinse is washed off.

I understood from my own experience and the experience of friends. that if something breaks, then everything needs to be bought new.

I understood from my own experience and the experience of friends. that if something breaks, then everything needs to be bought new.

Is not a fact!

I understood from my own experience and the experience of friends. that if something breaks, then everything needs to be bought new.

Not always. It depends on what kind of breakdown.

Girls, please remind me how to make a preventive treatment with citric acid, I forgot. A pack (how many grams, otherwise they are different) and on which program? Thanks in advance, otherwise there is no way to reread, the Internet is very weak.

Oksana, I'm throwing 3 tbsp. l. spoons directly into the drum, and turn on the "cotton 60 degrees" program