Convection grill Gfgril GFA-3500 AIR Fryer

Olya, maybe you don't insert the basket completely? Or will she not work like that?
It's a pity, of course, but it's from above, not inside ...
I have Orson in my cartoon, I also have the bowl on top of the bowl a little, because you close the lid, it goes tight ...

No, that's not the point. And if you leave the gap without inserting it completely, it works.
Namely, that at the moment of pushing it into the oven, it shuffles against the top. When holding the basket in your hands, the edge of the mesh basket is higher than the cup. The fillet is cooked in it, not empty.

My Filka shorts so mechanically, and the little black Filka and gfka are all right, no snags.

[Tanyulya]

pushing into the oven shuffles against the top.

It's strange how, the basket seems to be inserted, but such a gap remains large ???

Tanyulya, Tanya, do you have the same gap?

I'll come and take a look. No, I don't remember.

but I have no gap at all (I just looked), the basket is recessed somewhere by 3 millimeters relative to the level of the retractable bowl (but this is in a state of "rest").

And I push it in, first putting the bottom edge of this bowl in the airfryer itself, and then letting the basket go to the appropriate level (state of "rest") and pushing the bowl to the end (as if in 2 steps (I did this right away, at some "automatic").

and no shuffling ...

but I don't have a gap at all (I just looked), the basket is recessed about 3 millimeters relative to the level of the retractable bowl ...

Natasha, I have the same

So I say that the basket may not be fully inserted

[Tanyulya]

It's strange how, the basket seems to be inserted, but such a gap remains large ???

Tanyulya, Tanya, do you have the same gap?

Stands flat on the table. But it is worth taking it in hand - the bowl lifts up in the edge opposite the handle. At first, I somehow did not notice this.
Does the bottom in your basket bend? I have it like a tin bends back and forth when mine. Maybe this is normal - thin and full of holes ...

Posted on Friday 20 Jan 2017 4:35 pm

So I say that the basket may not be fully inserted

Into the bowl? Before it snaps into place. Otherwise, it will fall out.

Well, then I don't know, maybe the girls will tell you something ...

I do not shuffle, everything enters exactly, nothing clings

I already thought to bend the crap, with which the handle is attached, so it does not even bend!

Does the bottom in your basket bend? I have it like a tin bends back and forth when mine. Maybe this is normal - thin and full of holes ...

Everything is tough for me, nothing bends when washing and pressing, and it's not thin at all.

and my bottom of the basket is hard ...

Well, everything, I have a marriage, hike.

[Olga]

Olga, and where did you buy it?

On the WB.

Added Friday 20 Jan 2017 4:58 PM

It is necessary to write to the officials, ask. Fig knows what this refers to ...

[Olga]

Olga, write to the officials. Maybe they just replace the basket.

And I'm there, but I have a hard bottom, as I said. If you hold the basket by the handle inserted into the lower bowl by weight, then due to the weight of the basket, it rises slightly. But this is if on weight. When I insert, the basket comes in exactly without clinging.

[Olga]

Olga, write to the officials. Maybe they just replace the basket.

Thanks for your support girls! I will write.

If you hold the basket by the handle inserted into the lower bowl by weight, then due to the weight of the basket, it rises slightly. But this is if on weight. When I insert, the basket comes in exactly without clinging.

here I have the same thing.

and, as I said, I slide the bowl in 2 steps: first, I install the lower edge of the sliding bowl in the airfryer, and then, when the edges of the basket and the sliding bowl are aligned, I push it all the way.

and, as I said, I slide the bowl in 2 steps: first, I install the lower edge of the sliding bowl in the airfryer, and then, when the edges of the basket and the sliding bowl are aligned, I push it all the way.

Yeah, Natasha, I can do it the same way. But it's somehow on the machine, I didn't even think about it. You start to insert, everything aligns. I did and continue to do the same with Filia.

here I have the same thing.

and, as I said, I slide the bowl in 2 steps: first, I install the lower edge of the sliding bowl in the airfryer, and then, when the edges of the basket and the sliding bowl are aligned, I push it all the way.

And so she began to do, after she noticed Kotska. But all the same, I looked now - the top of the inner basket is not recessed, but two millimeters above the edge of the outer bowl, when it just stands.

the top of the inner basket is not recessed, but two millimeters higher than the edge of the outer bowl when just standing.

this seems to be a marriage, since my basket level is lower than the level of the pull-out bowl (at rest, when it’s just standing) (although I already talked about this).

Here I took a picture of two positions, suspended and standing on the table. When standing, the bowl does not go beyond the bottom.


And it hangs when you hold it by the handle

Posted on Friday 20 Jan 2017 5:23 PM

I agree with Natasha, I would refer to marriage that the cup goes beyond. But they may not be recognized as a marriage, because there may be some way to correct the position of the bowl: girl-th:

I checked that it does not touch anything, enters and exits without obstacles.

Tax,: mail1: when buying, check the bowl ...

But they may not be recognized as a marriage, because there may be some way to correct the position of the bowl: girl-th:

In general, it is up to the consumer to either repair the product, or replace it, or demand a refund with the termination of the sales contract.

Sellers abuse the ignorance of consumers-buyers of their rights and impose the repair of a new thing (new, Karl!) Under the guise of "diagnostics" or a type of "examination" (which in fact should be carried out in order to establish the presence or absence of a lack of goods that existed at the time of its transfer to the buyer (but not to eliminate this deficiency).

Therefore, here, apparently, a replacement (but this is at Olga's discretion).

Definitely, you must insist on the replacement or return of the goods and, accordingly, the money for it.

Definitely, you must insist on the replacement or return of the goods and, accordingly, the money for it.

Oooh, it's useless. You give it for examination - a hundred years will pass, and then nothing is recognized - it works!
I'll ask the officer. As they say, so I will.
Girls, thank you all soooooooooooo!

[Zamorochka]

Zamorochka, congratulations on the new thing, let it serve faithfully and for a long time.

Posted Saturday 21 Jan 2017 5:33 PM

My basket is very badly washed! You have to rub it a couple of times after 10 hours of soaking. already begins to enrage - you have to use it several times and already all desire disappears.
And another trouble: the cover at the top of the bowl was scratched (it's easier to take a picture than to explain).

Strange, everything is perfectly washed with me. In general, according to the sensations, the GF's a / p coverage is better than that of Redber (although he also washes without problems). Did you rub it with anything abrasive?

Scratches - yes, this is the weak point of this design. I have a large scratch on the rim on the Redber basket (outer) due to the fact that I inserted it somehow wrong. Not at the GFK yet, but this is a profitable business, unfortunately

Posted Saturday 21 Jan 2017 5:40 PM

I somehow wanted to fry "like in a frying pan with onions": 3-4 minutes before the end I added chopped turnip onions, so it burned slightly, although it gave its aroma, but I won't do that anymore ...

Yes, vegetables fry faster, so you need to add them later.
And we now have a favorite potato - with cracklings.I don’t get tired of recommending this simplest and most delicious dish for afka: sliced ​​potatoes, sliced ​​brisket or ham or bacon on top. In the process, stir two or three times. One smell can feed a company

Added Saturday 21 Jan 2017 6:00 PM

the top of the inner basket is not recessed, but two millimeters higher than the edge of the outer bowl when just standing.

This is a marriage. The basket should be slightly lower.

Did you rub it with anything abrasive?

Absolutely not. With a soft sponge and Amway dish soap. Somehow the second time I didn't like the quality of washing - traces of adhering fat have to be wiped off with effort.

Posted Saturday 21 Jan 2017 6:53 PM

This is a marriage. The basket should be slightly lower.

With the use of brute feminine force, a little bent the piece of iron, now the basket with its far edge stood on the bottom of the outer bowl. So at least it does not stick out from above.

With the use of brute feminine force, a little bent the piece of iron, now the basket with its far edge stood on the bottom of the outer bowl. So at least it does not stick out from above.

Let's hope it won't scratch anymore.

[Tanyulya]

Tanyulya, Tanyushechka! Thank you very much 3a chicken recipe in Af! soooo it turned out delicious and juicy!
Who said that Phil doesn't know how to cook whole chicken ?! does a great job, the chicken is great on the grill pan!
Tanyusha, well that ... to Fillet still and such Afa is necessary that whether: crazy: we have so many pa3nyh similar stoves and with such cor3inoy, as yours too is.

Girls, at the office. the site of the stove 7640, can anyone

Girls, on WB 7121. Discount 21%. Running ...

Girls, on WB 7121. Discount 21%.

They sent me a 20% discount, but I can't get it)), I bought it already. And the price is great

They sent me a 20% discount, but I can't get it)), I bought it already. And the price is great

Galya, can you imagine, but I get 6600 from mine. And I can't get it. I didn't wait for such a discount ...

[Mirabel]

Mirabel, Vikusya, thanks: rose: I am glad that Filechka coped with everything. GFka is the same, it's just that the bowl is more convenient for me and it's not noisy. Plus, of course, automatic programs are interesting.

I did not wait for such a discount ...

Ol, here I am, if something catches fire, then, damn it, nothing stops me.But sincerely I will be glad for the girls who buy with such a good discount

Today I again made cutlets, making the most of the experience of the owners of this machine.

Still, I put some foil under the basket, and this decision turned out to be correct. Thank you.

And the cutlets, given that they should be lite, but fried, I sculpted, lightly greasing my palms with oil and taking minced meat from a cup, forming cutlets, putting them in a removable basket, and for 10 minutes at 200 gr.

In addition, I did not sprinkle with oil, they were fried as in the 1st attempt to cook them.

[Natasha]

Natashabut tasty though?
No photo?

but tasty though?
No photo?

it turned out delicious (and light), so I didn't have time to take the photo ... but they were also fried, as I did then.

repeat:

Hot, delicious!

[Natasha]

Natasha, or maybe try to set the temperature lower, maybe less fried will
I also need to experiment with this process of frying cutlets.I once fried fish cakes in Fillet, heated it to 200, but I don’t remember fried it, either 160 or 170, and sprinkled it with oil from a sprayer.

they just look like this, and so they - as they turned out fried from a frying pan,
BUT! practically without oil, and this is the point for me, such lite cutlets turned out (minced turkey mixed with chicken).

We have previously discussed the possibility of cooking cutlets in GF with a minimum amount of butter, breading (when it was suggested (and I did) sprinkle butter on each cutlet).

And this, in continuation of that mini-discussion, I shared that I tried without breading and practically without butter (only palms in oil) ...

and this is the meaning for me, such lite cutlets turned out

That's why I bought this unit, so that there is a minimum of oil or no oil at all
therefore, sometimes I cook in a micron or steamed.

Girls, in Ozone discount up to 7640, will be valid for 1 day.

And the officials have such a price until March 8.

Girls, tell me pzhl., And whoever fried French fries in it, how is it?

Girls, ordered on Ozone, delivery on February 20. Thank you all for the consultation!