Multicooker Lumme LU-1447

The LU-1447 SMART multicooker with 86 programs, 30 of which are automatic and 56 are manual, will help you prepare any dish, from ordinary milk porridge for breakfast to jelly for a festive table.

The most important feature of the LU-1447 SMART multicooker is the SMART program - an eight-level program with manually changeable settings for each of the cooking levels and a memory function for the last settings entered. SMART is designed for cooking dishes that require several temperature-time cooking cycles.

The LU-1447 SMART multicooker is equipped with the CHEF PRO patented technology, which allows you to change the basic time and temperature settings and save them in the device memory.

The LU-1447 SMART multicooker has the “Multipovar” program, which allows you to set any time and temperature settings for cooking your favorite dishes. The temperature setting range is from 35 to 170 ° С in 1 ° С steps. The time setting range is from 1 minute to 24 hours in 1 minute and 1 hour increments.

The LU-1447 SMART multicooker is also equipped with Auto-heating functions with the option to turn off, Delayed start function for delaying the start of cooking and Reheat function for heating ready-made food.

Model LUMME-1447 SMART is equipped with a bowl with DAIKIN® non-stick coating, which helps to preserve the true taste and useful properties of products, is not afraid of mechanical damage and sudden temperature changes. The coating has good non-stick properties. Also, it has antibacterial properties, does not oxidize and does not emit harmful impurities when heated.

Power: 860 W
Bowl volume: 5 liters
Blue LED display
Touch control panel
Stainless steel body
Bowl lining - DAIKIN polymer coating / two-layer ceramic
30 automatic and 56 manual programs
SMART - Multilevel Automatic Temperature Control System
MULTIPOOK - manual setting of temperature and cooking time
SHEF-PRO - allows you to change the cooking settings of any program, saving them in the multicooker memory and using them in the future
Maintaining temperature for 24 hours
Delay start program up to 24 hours
3D heating technology
Beep signal for program start and end
Intelligent overheating protection system
Saving the program after a power outage for 2 hours
Accessories: container steamer, spoon, measuring cup
Power supply: 220 - 240 Volts, 50 Hertz

86 COOKING PROGRAMS
Multicooker programs are convenient, fast and very tasty! Take your culinary skills to the next level with LUMME's automatic programs!
86 cooking programs (30 automatic programs and 56 manual settings) allow you to prepare many new dishes! In addition to the standard set of dishes for most multicooker, now you can cook yoghurt, roast, jelly, boiled pork, make jam or fruit drink.
For each of the 30 automatic programs, the optimal cooking times and temperatures have been selected, which are loaded by default at the first start.
Your new multicooker has the following automatic programs:
Frying
Recommended for cooking fried vegetables, meat, fish with oil. Cook with the lid open. Auto-heating does not turn on at the end of the program
Bakery products
Recommended for baking muffins and biscuits
Languor
Recommended for cooking dishes requiring prolonged heat treatment.
Jam / Jam
Recommended for making preserves and jams
Yogurt
Recommended for making yoghurt. Auto-heating does not turn on at the end of the program
Soup
Recommended for preparing various types of soups, broths
Extinguishing
Recommended for stewing meat, fish, poultry and vegetable stews
Milk porridge
Recommended for preparing liquid porridge.
Steam
Recommended for steaming dishes - fish, meat, vegetables, dietary, vegetarian and children's menu dishes.
Pilaf
Two-stage program. Recommended for cooking pilaf, risotto, paella
Rice / Cereals
Recommended for cooking rice, buckwheat and other cereal side dishes
Jelly
Recommended for preparing jelly and aspic.
Bouillon
Recommended for cooking broths based on meat, poultry, vegetables, etc.
Pasta
Recommended for making spaghetti, pasta and other types of pasta
Cooking
Recommended for cooking boiled meat, vegetable dishes, pasta.
Children food
Recommended for preparing baby cereals and milk meals for babies
Baking
Recommended for roasting meat, fish, vegetables
Milk
The program is specially designed for boiling milk
Omelet
Recommended for making omelets
Russian stove
Recommended for cooking broths, legumes, meat, poultry and other dishes that require prolonged heat treatment
Cottage cheese
Recommended for making curd
Deep fat
Recommended for deep-fried cooking. Auto-heating does not turn on at the end of the program
Bread
Two-stage program. Recommended for baking bread and other flour products
Pizza
Recommended for baking pizza
Express
Fully automatic program. Recommended for the preparation of crumbly cereals from any grades
Boiled pork
Recommended for roasting meat
desserts
Recommended for making desserts
Dough
The program is specially designed for proving yeast dough. Auto-heating does not turn on at the end of the program
SMART
Multilevel program with customizable settings for cooking dishes that require different temperature conditions - sauces, fries, soups, etc.
Multicook
Program with custom settings for temperature and cooking time

Also, one of the main features of the LUMME LU-1445 and LUMME LU-1447 multicookers is the ability to set manual settings for the cooking time and temperature in 28 main automatic programs, which allows you to create 56 new options for individual custom cooking parameters. In addition, all changes made by the user are saved in the multicooker memory, replacing the factory settings. The most important feature of the new multicooker is the SMART program - an eight-level program with manually changeable settings for each of the cooking levels and a memory function for the last settings entered. SMART is intended for cooking dishes requiring several temperature and time cooking cycles.
The manual settings of the cooking programs combined with your culinary experience will help you follow the recipe recommendations closely and help you create your own programs! LUMME experts have created automatic programs for you. Become an expert and you - create your own cooking modes for your favorite recipes!
SMART
Multilevel user program SMART with customizable settings for each of the eight stages of complex dishes with memory function. This program is intended for cooking dishes that require several different temperature and time settings for each of the cooking stages in one cycle. Ideal for cooking dishes such as dressing soups (sautéing vegetables, stewing soup dressing, main cooking stage, bringing to readiness at a low temperature); goulash and roasting (roasting vegetables and meat, stewing in sauce, languishing).
TWO-STAGE PROGRAMS
The more complex the programs, the tastier the dishes! Never before have a multicooker been so flexible in the implementation of recipes. The art of culinary can be both simple and complex, for example, at different stages of the preparation of certain dishes, it is necessary to reduce the temperature, and it seems that this cannot be done without human intervention. To ensure complete automation of the process of cooking such complex dishes as Pilaf or Bread, they consist of two stages, each of which has its own settings for cooking time and temperature.
The start of the second cooking stage is indicated by a sound signal. Manual temperature change is not available in these programs.
EXPRESS
The fully automatic Express program is specially designed for preparing cereal side dishes. The principle of the program is based on the continuation of the multicooker operation until the liquid in the bowl completely evaporates. All you need to do is add the required amount of water.
CHEF
The CHEF function allows you to change the settings of a running program without interrupting the operation of the multicooker. Simply adjust the time or temperature according to the degree of cooked food and wait for the program to finish. LUMME offers ready-made recipes resulting from work
culinary experts. But the most valuable thing is your personal experience! Complete the recipes of the professionals to your liking. All the best needs to be developed.
MULTI-COOK
The MULTI COOK program allows you to manually set the cooking time and temperature. The most subtle way to individually program the multicooker, since the time and temperature settings can be set with minute and degree precision. The MULTIPOOK program becomes functionally indispensable in combination with the CHEF COOK mode and the CHEF COOK PRO function. The CHEF-COOK allows you to correct the settings on the fly, and the CHEF-COOK PRO saves the changes in the device memory for further use of the programs with the corrected settings. The temperature setting range is from 35 to 170 ° С in 1 degree increments. Time setting range - from 1 minute to 24 hours in 1 hour / 1 minute increments. With "Multipovar" you are not limited by anything. Any recipe, told in secret by old friends or found in the faded lines of a cookbook forgotten on the shelf, can now find a new life and please not only you, but also your loved ones! But most importantly, Multipovar will help you come up with your best recipe!
CHEF PRO
For those who are ready to become a culinary master or have already become one, the multicooker allows you to create and save your own cooking programs.
The CHEF PRO function is a function to automatically save the settings of automatic programs changed by the user. The changed settings are used as default settings, overwriting the factory settings. If necessary, individual settings can be reset and returned to the factory state.
3D HEATING
3D heating technology is based on the simultaneous use of three heating elements of different power: bottom, side and top. The result of using this technology is a "volumetric" uniform heating of the product, similar to that which is possible in an oven. This not only reduces the operating time of the device on programs such as Bread, Roasting or Russian oven, but also guarantees uniform heat treatment of products, avoiding the likelihood of their burning.
AUTO HEATING (MAINTAINING THE TEMPERATURE OF COOKED MEALS)
The program to automatically start heating at the end of most programs allows the finished food to be kept ready to serve. This function is available for all programs except the following: FRYER, YOGHURT, DOUGH and FRY to avoid spoiling the finished meal. However, the user can always activate the automatic start of heating at the end of these four programs.
TURNING OFF AUTO HEATING
Our multicooker has the ability to manually turn off the auto-heating during cooking or at the end of the program.The automatic heating function is canceled by holding the START / AUTO HEATING button. A true culinary specialist decides everything himself.
WARMING UP
The HEATING program is used to reheat ready meals from the refrigerator or to defrost food.
DELAYED START
The multicooker can be prepared in advance by loading the necessary products into it, and set in such a way that the cooking program starts on its own, without human intervention. You just need to indicate the period of time after which the program should start. The available setting range for this function is from 1 minute to 24 hours. This function is not available for all automatic programs, the FRYING, BAKING, PLOV, BABY FOOD, MILK, OMLETT, FRYER, BREAD, PIZZA, EXPRESS, DESSERTS and DOUGH programs cannot be started by timer.
MUTING THE SOUND
Most operations during the operation of the multicooker are accompanied by sound signals. For the convenience of the user, the design of the multicooker provides for turning off the sound alerts by simultaneously pressing and holding the + and - buttons when the device is in standby mode. The deactivation of the sound alert function is indicated by the indicator backlight
REMOVABLE COVER PANEL
The lid of the multicooker, thanks to its unique design, has an internal removable panel. After cooking, it can be removed and washed with the bowl. The multicooker will always stay clean!

LUMME is a major manufacturer of modern household appliances designed to take care of your health. Multicooker LUMME is a high-tech kitchen equipment for easy preparation of all kinds of dishes while maintaining all the nutritional properties of the products. One of the features of the LUMME LU-1445 is a bowl with a unique ANATO ™ (Korean ceramics) coating, while the LUMME LU-1447 comes with an advanced Japanese DAIKIN ™ non-stick coating. Thanks to these coatings, your dish will never burn, retain its taste, aroma and vitamins. Discover new culinary possibilities with LUMME multicooker!

Well, finally, today I came!











I took for the action, the second cup as a gift.

[Gandalf]

Gandalf, Yuri, on such a slow cooker just fly into space, on program 52

[Gandalf]

Gandalf, with her two bowls, right? Please write about your impressions!

[Yuri]

Yuri, Congratulations! Let it serve for a long time and only please!

two bowls with her, right?

There was a promotion on the site, the second bowl as a gift

[vernisag]

vernisag, thank you for your congratulations and wishes!

[Gandalf]

Gandalf, Yuri, congratulations and waiting for your impressions. Painfully, I like this beauty.

Finally I got to my beauty.



Her bowl, in comparison with my other multicooker, is light 622 g, non-stick Daikin coating. Only time will tell how she will behave in her work.
The first start was on the "steam" program, t ° 105 ° set the time to 10 minutes (default - 30). The countdown begins on this program after the water boils. When turned on, there was a slight smell. The multicooker wiped it off and set rice milk porridge to cook on the "milk porridge" program in proportions of 1 to 5. The default time was 20 minutes, t ° - 98 °. The time was changed by 50 minutes, the temperature was left the same.



As you can see, the porridge tried to escape, but did not reach the lid.



Next time on this program I will set t 96 °. There was enough time, it turned out to be such a mess.



The first impression is good, I will check the programs further. I like that you can change the temperature and cooking time during the cooking process.

[irman]

irman, Irinathanks for the first test!
Excellent result! Congratulations on your purchase!

[Yuri]

Yuri, thanks, let's take the baton.

[Irisha]

Irisha, congratulations on the new thing! Do I understand correctly that her temperature is regulated in all modes?

Yes Mannochka, you can change both the temperature and the time on almost all programs, except for the "bread" and "floors" programs, during the cooking process.

[Yuri, Irina!]

Yuri, Irina!I also sincerely congratulate you on such a beauty!
Let it serve for a long time and not know wear and tear.
Looks like Martha a little.
What an amazing rice porridge!
Oh ... I came to read and rejoice, but I directly feel that soon it will be vital for me.
Drive me out of here with brooms or something stronger.

Drive me out of here with brooms or something stronger.

Ritochka, this will never happen, we are all glad, come back often.
Test No. 2
I decided to check the "express" mode, cook macaroons with meatballs. It is written that this is a sensory program and works before the liquid is evaporated. First, I fried meatballs with spices, minced turkey. I switched on the frying program (by default t ° 170 ° and time 30 minutes), did not change the temperature, but reduced the time to 15 minutes. The countdown on this program does not start immediately, but only after the multicooker has reached the desired temperature. This took 4 minutes. Fries very intensely, for 3 minutes. the meatballs are fried, lowered the temperature to 140 °, put on the diced onion, simmered slightly, then the carrots, and then the tomato. The frying program has ended. Total 4 min. reaching the desired temperature plus 11 min. the frying itself. I added 300 grams of vermicelli to the bowl and poured 4 m. From. warm water. I turned on the program and was very happy, the program really works until the liquid has completely evaporated, it lasted 40 minutes for me. The macaroons below are a little fried. Here is such a yummy I got.



While I'm very happy with the multicooker, let's see what happens next.

[irman]

irman, Irochka, you tell it so deliciously and intelligibly, the price for the stock is very attractive now, I don't have a single multi, but after your stories I wanted it straight, but I'm afraid I won't figure it out alone, I'm waiting for your next reports

you can change both the temperature and the time in almost all programs, except for the "bread" and "floor" programs, during cooking.

Then I somehow don't understand the meaning of so many modes - one is enough. No, two - touch and multi-cook.

I already ran to the officials to see the price. So far, it is 3799 and even with an extra bowl!
Oh, Ira, what delicious macaroons!
Am I again for my own or not? : girl-th: An extra pot is always useful on the farm.
Many are not enough.
On the other hand, why do I need one more. Salt them or something.
Ira, tell me, please, did you order from the officials? And if so, how soon was your order delivered?

[irman]

irman, Irochka, you tell it so deliciously and intelligibly, the price for the stock is very attractive now, I don't have a single multi, but after your stories I wanted it straight, but I'm afraid I won't figure it out alone, I'm waiting for your next reports

Nadia, there is nothing complicated in her, we’ll help you with tea here, next to each other.

Then I somehow don't understand the meaning of so many modes - one is enough. No, two - touch and multi-cook.

Mannochka, well, let the manufacturer want to.

[irman]

irman, You are so delicious in the story and the action, I can hardly restrain myself from buying.

I read with interest your further experiments.
Interested in programs yogurt / cottage cheese.

Also, could you measure the cup?
Height, diameter at the top and diameter at the bottom. Thank you!

[irman]

irman, that is, if the cooking temperature is changed, for example, on porridge, she will remember it in the next. once it starts up?

I am also interested in what 3D HEATING is, that is, if a biscuit is baked in it, then it will brown on top or I am dreaming

Looks like Martha a little.

This multicooker is produced by Marta.
This company produces three product lines: "Lumme", "Home-element", "Marta".

daydreaming

3d heating is the presence of a small heating element in the lid for drying condensate, no more.

[irman]

Miranda, bowl height 14 cm, diameter with a rim - 23.5, without a rim - 21.5, and I don't know how to measure the bottom, it is rounded. The narrowest point is 16 cm, then there is a smooth rounding and turns into 21.5 cm, the accuracy is not guaranteed.

irman, that is, if the cooking temperature is changed, for example, on porridge, she will remember it in the next.once it starts up?

Yes, the multicooker remembered this temperature. Now, when you turn on the "milk porridge" program, t ° 96 ° is displayed.

Interested in programs yogurt / cottage cheese.

I will definitely do it, but later.

the height of the bowl is 14 cm, the diameter with the rim is 23.5, without the rim - 21.5, but I don’t know how to measure the bottom, it is rounded. The narrowest point is 16 cm.

Thank you

I wonder how long their promotion will last. This is not a question for you, of course

[irman]

irman, I wonder how the two-stage program Pilaf works, there some time is given for frying, and then with rice the 2nd stage, and if the program time is increased, it gives for each stage the time to set or is it the total time that the cartoon itself divided between stages?
Sorry, we pester you with questions

You cannot change anything on the "pilaf" and "bread" program.

Finally I got to my beauty.

Uryayayaya! Finally, a new cartoon, with new wallpapers!
Congratulations Irin! Let it serve for a long time and only please!
Porridge with macaroons is very appetizing!
Even for a very long time the express program cooks

You cannot change anything on the "pilaf" and "bread" program.

And on the express, probably too?

Irish, I poured a lot of water until it evaporated all of it, but I did not try to change the time and temperature on this program, I'll check it tomorrow.

Something about pilaf is not clear, if the time cannot be changed, then it is something sensory, like Express, until the liquid boils off, and if the time is rigidly set, then it is not clear whether the number of products may be different.

Until we try, we will not understand.

I have no limit to joy today. My favorite multicooker bowl, Stadler Form, was the perfect match for my new multicooker. Now there will be no problem with the bowl, it was not in vain that I bought a spare one, it came in handy. I ran the test, made a quick potato soup with sausage, everything went well.

The bowl fits !? Class! Did the program work correctly with it, no problem? And then, in my zinka, with a bowl of filipka, it seemed like the cartoon did not work that way Although it may have seemed
Pretty soup Irish Why didn't she write how she cooked, on which program, how the program worked, what kind of boil was and whether there was any

Irin, cooked soup on the program (default t 100 °, time 1 hour), set the time to 40 minutes. At the beginning there was a strong boil, I wanted to lower the temperature, but decided to check what would happen next. After about five minutes, strong boiling stopped, I watched the steam outlet. Steam will go stronger, then quieter. The soup program did its job.

[Irin,]

Irin,the soup is wonderful !!! He is so rich!
Please try to cook something using the Baking program.

cooked soup on the program (default t 100 °, time 1 hour)

Yeah, I see
Go peki let's chen

I obey and obey.

[irman]

irman, Irin, I understood correctly, this is not a multi-cooker - a pressure cooker, just a slow cooker?

[Irin]

Irin, this is an ordinary slow cooker

[vernisag]

vernisag, Thanks, Irish, for the answer

Please try to cook something using the Baking program.

Go peki let's chen

I am an obedient person, take a photo report for the "baking" program, t 130 °, time 70 minutes and 20 minutes on heating. There was no condensation, nothing was pouring from the lid.
Chocolate muffin with prunes





I cut it while still hot. I like this cupcake, I once found the recipe on the Internet. I cooked like this: 200g. whipped butter with 150 gr. sand, then added 3 tbsp. l vegetable oil and 5 tbsp. l. hot water and beat again, beat 5 yolks and added to the butter mixture, mixed. Flour 400gr. mixed with 3 tbsp. l. cocoa and 1 tbsp. l. baking powder and added to the butter mixture, mixed. Then she beat well 5 proteins with 150 gr. sand and combined them with the dough. Greased the bowl with vegetable oil, laid out the dough, and put chopped prunes on top. According to the recipe, prunes must be soaked in 100 gr. cognac 30 min., I didn’t, so delicious.

Irinkaaaa! What a handsome man! You and the cartoon are great!
The recipe is so interesting And when you pour hot water into the oil, it probably melts all at once, then why beat it up Or does it not melt?

Irin, when you pour in water, the butter melts, but when you start whipping, you get such a delicate mass like cream. I was also surprised at first when I first read this recipe.

Aaaaa, interesting, I will have to try Thanks Ira!
Can you expose the recipe?

Maybe we have one on our website?

I don't know, look