Kitchen machine ProfiCook MKM-1074

Lyuba, wow!
Was he no longer under warranty?

I ordered from Computer Universe. And I could not return it, since the postal parcels to Germany have restrictions on weight and size, the mail does not accept

Liubov_Liubov, so Profikuk has nothing to do with Steba)
These are different brands, everything is different)

Seriously?) I just thought that these are different brands of the same company))) I apologize then. China is different ... Cuckoo is also China, Princess China, and Bork is the same China. I have been to many different factories in China, and I have a normal attitude towards Chinese equipment and consumer goods. But in my opinion, the device for 20 tons. (and in Russia it would have come out more expensive) does not in any way pull on the device from the series to play for a couple of days, I liked it - it took more expensive.

[Liubov_Liubov]

Liubov_Liubov, well, everything is expensive here, unfortunately ((

Hello. Please help me very much. I do not know what topic to write, so do not scold too much.
So, I desperately needed a recipe for a yeast-free dough (for pizza) and a method for preparing it from the recipe book for the Sekrett kitchen machine. I rummaged through the entire Russian-speaking Internet - nothing. Maybe someone has this car with a book? Help me out, please.

[ruumpaa]

ruumpaa, I have, I'll look now.

Well, where's the recipe! we want too!

Mash, I wrote to a man in my face, here, after all, the topic is not Sektetta, but if people want, I can duplicate it here.

[Catwoman]

Catwoman, Lena, duplicate, they have the same cooking principle)

Masha, if necessary, then a recipe for pizza ..... Ankarshruma ... T eat .... 2 cups wheat flour, half a teaspoon of salt, 2 tsp baking powder, 50 ml olive oil, 150 ml milk ..... I put less baking powder ... it still works ... bake at 225g for 12 ... 15 min.

Without yeast ... put everything and mix ... the dough will be elastic ... I think it will work in any device

And at the same time Shteba and Proficuk broke down at the same time .... Proficouk showed an overload at least, but Shteba just didn't turn on again ...
went to the topic of Thermomix, does it really not break down like my old (20 years old) Panasonic and Boshi?

[Irlarsen]

Irlarsen, Irin, yes, everything breaks down, it's just that TM is designed for longer use than Profiquk.
There are also complaints about TM, just less and the service works for them. If anything, they fix it, but the repair is expensive (

The girls who are in Germany, want to and did not have time to buy cars in Aldi-Lidl, have now appeared in Tedi. They are very similar to the Lidlov ones, everything is also washed in the dishwasher and the functions are the same, only the body is slightly different (IMHO, even prettier) and the temperature is up to 130 degrees. I don’t know how many years Tedi gives a guarantee, but the process has begun.

I found out in a German Facebook group dedicated to clones of the thermomix that Tedi gives a 2-year guarantee. Some bought this machine there and so far they are satisfied, they say that it is very similar to the Lidlov one and the spare parts from the Lidlov one (bowl, knife, etc.), which can be bought on the MS website at the link below, are also suitable for this combine.

Tanya, vooott, now another one)))
Tedi online store, as I understand it?
Yes, it's bad that they don't write about the warranty, probably 1 year, otherwise they would have written.
By the way, aldi answered my application. They said that there are no studio cars, but there are similar ones. And if I want, then call them back.
But this "similar" is much worse. This was the case in France.

I wrote a letter to vttedi asking about the warranty.
If I wait for Lidlovskaya, that of France), we didn't seem to have them this year, so I hope they will be there by Christmas)

🔗

Was at Tedi's store yesterday, they didn't have these cars.I didn’t ask if they would receive them or if the harvesters didn’t go to all branches, or if they were only online.

This one on your link looks like a proficook, but I didn't really like the panel, it seems not durable. If you don’t buy now in Aldi-Lidl, then IMHO it’s better to wait until Bosch, Siemens, AEG, Brown, etc. will start producing them, because it is coming to that. If Bosch makes them in Slovenia, it will probably not be very expensive and of better quality than all these Chinese cars.

While I will wait Lidlovsky.
Yes, it would be cool to buy such a Boshev machine)), and also euros for 250))

I finally got some news about my proficook. They promised to send a new one, but wait as much as 6 weeks !!!!! Moreover, when I sent it, it was on the site with 2 day delivery. And now the price has been dropped (not very much) and that's it ..... All are sold out !!!!! 6 weeks wait, horror !!!!!!
Truth is, there is little consolation. I spat on strict instructions (send it in the original package with all the components, including even the instruction !!!!) since I already had neither the original packaging nor the instructions, I decided to send it in the minimum configuration, in about the packaging from the cousin ( she was still lying in the garage) The apparatus itself, bowl, lid and knife. I left the rest to myself !!!! And nothing, no one swore. Now I regret, I should have left the knife ...

[Irlarsen]

Irlarsen, well, well, it means you will have a new Proficuk))
They sent him to the scrap and had to keep the knives for themselves.

If the second one is covered, then buy Thermomix 31 model.

Irina, congratulations !!!!! Nothing, 6 weeks will fly by and you will get a brand new pro by Christmas)
When I had the very first and only multicooker, it broke down and they repaired it for me, or rather changed it, the same 6 weeks. I suffered, but survived) but I still use it with pleasure)
And nice little things that the accessories remained)

Thanks everyone !!!!
And the funny thing is, after half an hour as I unsubscribed here, my husband found the same original box from Proficuk in the garage !!!!! It's good that it's late, otherwise I would have sent everything entirely
And so I will have spare parts. I carry the proficuk all the time with me to the dacha. And now the beauty !!!!! Exactly double set of all attachments

Girls who read German and have a similar typewriter, cookbooks for Liddle's MC are on sale again, I ordered myself yesterday 🔗

Tanya, congratulations, did not watch in vain.

And I learned to cook lazy borscht in profikuk)))) Now that's the only way I will!

The broth and meat were ready.
1. Chopped the onion with carrots (sc. 5/10 sec), added three tablespoons of tomato sauce and a little oil, 5 min / 90 degrees
2. I pulled out the finished frying.
3. Put a piece of cabbage, divided into leaves. 5/10 sec, added oil, 10 min / 90 degrees
4. Added potatoes in small cubes and filled with broth (you can use water). 20 min / 100 degrees
5. Salted, added frying, boiled meat and herbs, salt and spices. 5 min / 100 degrees.

Delicious! And I did not suffer as usual))) For some reason, borscht is the most difficult for me to cook. And the husband only loves this ...

Of course, variations are possible, who likes how. It's just that it's faster, more convenient and cleaner to cook))))
I took this video as a basis -

[anna_k]

anna_k, Anya, how interesting !!
Thanks for the great way to cook Bosch !!!

[Masinen]

Masinen, Thank you!
It turns out that youtube has a bunch of thermomix videos, and it's not difficult to adapt them.
Proficuk stood idle for a long time, decided to learn to cook on it))))

[Anya]

Anya, well, it's right that in vain your husband made candy out of him))

Oh, and here's a brilliant idea I came up with after watching a video on the Princess tea maker.
But you can sterilize jars in our proficiency too?

[Anya]

Anya, can)
In TM, I sterilized the yogutra jars for a long time. And the lids can be put in a double boiler, closed and sterilized.

I also wanted to shoot about this video, how to do it. But it's kind of like eating with a tea maker, so maybe I won't shoot, otherwise they will say that I did not come up with it myself.

And this is me first

[Maria]

Maria, do not worry. They plagiarized your idea)))

And the idea of ​​sterilization is great! I have this eternal problem, there is no microwave oven yet, but nowhere else. I always doused with boiling water, but this is far from ideal.

I've seen enough of how salads are made in TM, I must try
And even plasticine !!! I'll try to repeat one of these days, as I buy the necessary products

[Anya]

Anya, so, when I had a microwave, I sterilized it in it.
And then when I sent her from home, then the question immediately became, and then I began to do it in TM or in a PC.
And you can also do it in a multicooker for a couple.
Steam mode and put the basket and the cans on the basket, and then the lids.))

And you can do without micra))

MK appeared in German online store Lidl
🔗

On December 14th, there will be MC in the French lidle. Wait)) Hmm, a Christmas present? There are still 12 days to think))

[Svetlana]

Svetlana, well think so, while there is time)))

Yeah))

Svetlana, if you buy it, first lubricate the gum of the lid with oil, it will be easier for the lid to close. And then it will develop itself.

Yeah, thanks, I read this advice in German reviews))

Nda ... that's kind of a neighboring country, but we only have Kalorik on sale for 400 euros, but I saw a very expensive Proficuk somewhere, as if more than 300 euros.
There is no demand for all this, no one needs .. except for some, a little sick in the head, grazing on the Bread Maker.

Madness))) An acquaintance of mine did not have time to buy it online.
I will rush to the opening of Lidl tomorrow)

[Lisichkalal]

Lisichkalal, Svetulya! Good luck! But if anything, do not be upset too much, it looks like the whole of Germany is inundated with them.
I’ll sort out my own affairs for now, so later I may also go to Duchland.
I bought another cabinet with a big slave po-ty: yahoo: happy as 50 elephants!

Vika, when they appear again, you will probably be able to order this Lidlovskaya online to Belgium.
And Caloric in Tedi is now online for 200 €, you can also ask if they send to Belgium, but there the warranty period is less than in Lidl (2 years versus 3).

Vic, thanks))
We now have discounts for simeo delimix qc350. 279 euros. But there are bad reviews, although there are many good ones.

You probably can order this Lidlovskaya online to Belgium.

But it seems to me that they do not send

You are right, I just looked at Lidl's website, they do not send abroad

Tanya, our euro is now very expensive and shipping will be as much, if not more expensive.
I hope we will soon also have an influx of such CMs, you just need to wait.

[vernisag]

vernisag, Irish, the influx will not soon come to us, the ruble has gone down, just kapets!

Few new products are being imported now.

I really liked this one, so compact, pretty, I want uuu

Compact is of course good. But at high speeds, the machine needs a stable base.
I have two - a delongue multicooker for children, a heavily cut kitchen machine, and a proficouk. At high revs, the delongue jumps on the table very well, you need to hold it. Due to its wide base, the proficiency stands rooted to the spot even on a turbo.
I came across a video where a new thermomix was bouncing around the table so badly during grinding ... I was very surprised, I thought that they had solved this moment.
Probably, they ground something heavy there, but nevertheless.

[vernisag]

vernisag, Irish, the influx will not soon come to us, the ruble has gone down, just kapets!

Few new products are being imported now.

Well, maybe summer will change
Damn, these crises, what kind of life ... When will everything get better and there will be peace, a normal calm life? ...

I don't know, Irish

Compact is of course good. But at high speeds, the machine needs a stable base.

There is also not great power ...