Multicooker Element FWA 01 PB El

I don't remember about RBT already. The Third Element was definitely cheap there, I bought it there. But, honestly, I have already forgotten how much it was there.

[Sveta]

starting from Kemerovo, Barnaul and further towards Tomsk ... they are available

Sveta, today we were in Krasnoyarsk ... apparently there was ... apparently one ... and who reads us so secretly here ...

I made an order for black, and they are only in Achinsk, there is no delivery to Moscow.
And white for 4990 can be ordered in Moscow.

And white for 4990 can be ordered in Moscow.

you have to wait, stocks often happen, at least 1 thousand cheaper were literally a week ago

you have to wait, stocks often happen, at least 1 thousand cheaper were literally a week ago

So we'll wait.
Thanks everyone!

I would not wait because of 1000, the remnants of these multicooker will run out at any moment and that's it. The real price of a mulka in the region of twenty is minimum. And at such bargain prices, the balances are sold after the liquidation of the company, since Element is bankrupt since the 14th year.

[ANPolter]

The real price of a mulka in the region of twenty is minimum. And at such bargain prices, the balances are sold after the liquidation of the company, since Element is bankrupt since the 14th year.

ANPolterdo you give this as good advice? Or you - instigator trade engine?

Elik is handsome! Thanks to everyone who encouraged me to buy this miracle.
Today I cooked beef (cutlet meat from Lenta).
1. Poured a spoonful of vegetable oil, put it on frying, loaded the meat - about 1,300. I did not close the lid.
2. Peeled 2 large onions, cut into half rings. She poured a spoonful of oil into the pan, put onions.
3. Stir the meat, close the lid.
4. I added the remnants of vegetable juice to the onion (except me, no one began to drink ...), two tablespoons of tomato paste, a tablespoon of flour, ground pepper. Five minutes gave it all to "connect".
5. When the frying program is over, pour the sauce into the meat, add salt, and .... of course, the stew program for 50 minutes. Super program for meat.
And everything is so delicious ...

The real price of a mulka in the region of twenty is minimum.

... You can put up fifty dollars. I think that they are buying at the real price, but

since Element is bankrupt since the 14th year.

this was to be expected. You need to really look at things.

And at such bargain prices, they sell the leftovers after the liquidation of the company,

something too often appear on sale "leftovers" and where do they just pick them up ?! If the leftovers are in warehouses, then, in my understanding, they sold out and that's it, they won't appear anymore, but here ... they sold the same Auchan, then they appeared again and so on several times. In RBT, they also appear from somewhere

[OlgaGera]

OlgaGera, well, look, it's a simple matter. On the Russian market there are 2 analogs of this multicooker, which, technically, with the exception of insignificant parts, are complete analogs, produced at the same plant in Korea and so on, and differ, by and large, only in external design - these are Bork model U800 and Cockoo model 1055 ... Both cost about 40,000 plus-minus, so I also wrote this 20 carefully. And at this price they are bought. Who needs it and who can afford it. So Element will be sold out and there will be no more options to buy a similar cartoon for that kind of money. You can even argue to the shit whether such a price is justified or not, but that is, that is. Premium segment and all that.
The element, as far as I know, was initially cheaper than these two analogs, so it is difficult to throw a stone at them and the reason for the bankruptcy is not at all in this, but in the fact that the parent company that owned this brand, as well as various other businesses, went bankrupt. In general, the reason for the bankruptcy of the Element is not at all in the Element and not in its pricing policy.

Ilmirushka, you wrote sheer nonsense. Turn on your brain and think again.

[ANPolter]

ANPolter, I am a buyer. And to delve into everything except the qualities of the MV itself is not at all interesting to me.
The price / quality will suit me - I buy.

something too often appear on sale "leftovers" and where do they just pick them up ?!

Xs. Has anyone ever seen these multi produced at least in the 14th year? In my opinion, no. All 13 and older. And the price fell to this level for them recently. So an unknown brand + a relatively high price + complete incompetence of buyers who are not able to assess for themselves whether the price corresponds to the quality = these multi, until now, no one actively bought, so they stayed on.

Turn on your brain and think again.

I will definitely use the advice ... when I see fit

complete incompetence of buyers

Yes Yes..

Ladies, why are you so angry?)) As if you stepped on a sore corn or touched something personally. They suspect some kind of advertising ... I don't care deeply about these multicooker and what you buy there or not buy. I just wanted to give good advice, but here it is ...

So you accused you of incompetence ... but not us

Incidentally, I, too, in 2014-2016, I don’t remember more precisely, heard from a Technosila consultant that the company that produces Stadler Form and Element household appliances went bankrupt. Then I bought an additional bowl for a multicooker very cheaply. And the Shef One multicooker itself then cost from 1.5 to 2 thousand rubles. So anything is possible.
And the current cost of a multicooker is comparable to the cost of Redmond and Polaris with different quality of manufacture. I doubt that this or last year's multicooker would have sold at such a fairly low price.

[Belka13]

Belka13, Stadler Form has nothing to do with Element and is still alive. The fact that on their website is sold for a horse, in comparison with others, the price of Element 01, it's just that our hucksters from this office decided to cut the dough.

So you accused you of incompetence ... but not us

Well, firstly, no one blamed you, people like you who are sitting on the forums and studying the issue are just more or less competent, but there are only 1% of them, and 99% come to the store and buy what the consultant advises. And the consultant will advise what the percentage of sales is higher for him. And secondly, the negative from you went even before this phrase.

What are you arguing about and most importantly why?
I'm thinking, I like the cartoon, I'll get another one at a tasty price, let it lie. Especially if the white one gets caught

[ANPolter]

ANPolter, I will not argue with you, I do not remember the details. I know that they have the same service centers.
Plus, if Stadler Form, as you write, is flourishing, why hasn't their assortment changed at all in recent years?

[lira3003]

if white gets caught

lira3003, Rita, they are full of new ones on AVITO, and the prices ... are relatively normal.

ANPolter, I won't argue with you, I don't remember the details. I know that they have the same service centers.
Plus, if Stadler Form, as you write, is flourishing, why hasn't their assortment changed at all in recent years?

And we do not argue, I wrote to you just for information. Just chatting))

Service centers usually have nothing to do with manufacturers. These are just repair offices, which have an agreement with several dozen representative offices of various companies. Therefore, a whole bunch of companies have the same service centers.

What is changing or not changing at the Stadler Form is not interesting to me, I only know that this is a very small office, literally of four people who can be seen on YouTube on their foreign channel. And that judging by the activity of their channel, they are quite well for themselves. The office is engaged in drawing a design, sending it to some relatively decent Chinese factory, and they make a cartoon / humidifier / something else, which is some kind of standard model inside, but it costs more than usual, due to the fact that it is "Swiss" and "designer".

you have to wait, stocks often happen, at least 1 thousand cheaper were literally a week ago

But I couldn’t make it cheaper than 8 thousand after I bought it for my son and mother, I constantly monitored it. But suddenly the price fell again ... If only with Avito.
Where did you see it cheaper by a thousand weeks ago?

Where did you see it cheaper by a thousand weeks ago?

RBT

RBT

Strange, there I monitored every day. It also depends on the city, the prices are different, they noticed. Did you take for 3990? Lucky, congratulations, let you please with long work!

Did you take for 3990?

yes, white.

Lucky, congratulations, let him please with long work!

Thank you. So here I saw the information about the price. Now in Siberia there are blacks in stock and the price is even lower, so who's lucky

yes, white.

Oh, well, a white beauty in general is simple!
Yes, I watched everything in Ekb, when it cost 3790 in Moscow, it was 5990 in Ekat, I will stand for a couple of days and jump to 7990 (I saw about Siberia, yeah, luck)))

And in Yekaterinburg, Elika 01, 03 and 04 are being sold for a promotion. Maybe it's worth buying and using at this price, but without any deliveries. For example, in Moscow on Avito they are almost gone, in stores the price is from 5 tons. R. Promotions cannot be infinitely, Мв 13г can end altogether.

was 5990 in Ekat

well, Ekat is not far from us, which means that at that time you should have had 3990 each,
That's it, I saw the action ended in Siberia, as if someone was sitting in ambush here and monitoring demand
there is now 6990, but we still have the same price of 4990 and yours. By Friday, go and again the action will be, they have it black every other time

well, Ekat is not far from us, so at that time you should have had 3990

But it's not a fact, that Chelyabinsk and Magnitka are nearby, and the prices were compared in parallel, by a thousand or two, even during the period of the action, they sometimes differ. I have been following the prices since January ...

And in Yekaterinburg

This is not with us, it can be sent by the Transport Company if they buy it, and we ourselves are in the outback in Bashkiria ...
But yes, I ordered a little white one in Ekata for 5 thousand, I will wait for the taperich ...

I really like these Elements. Highly!
I have two of them. Both were bought in the region of 5 thousand. I use one with two bowls, and the second is idle for now.
I do not regret at all that I paid 5 thousand. According to my requests, it completely pays for the result.

[Rita]

I really like these Elements.

Rita, I willingly believe! On weekends we go to my mother's village, today I cooked in her - well, just a miracle !!! I have a Panasonic 18, but somehow it didn't take root in it to cook. More in a clay pot, thick-walled stainless steel in the oven to darken, it seems and more economical - gas is still. And that I didn't buy a pressure cooker before! I remember how it exploded when I was little, at my mother's pressure cooker, I was afraid to see later ...
And this was a cartoon for my son in the hostel, so I began to look, first they bought him, then they gave my mother a gift, so as not to get bored in her old age, there is someone to talk to))) and she began to forget everything, then the dumplings will burn, the kettle will boil away. For what she flatly was, that electricity would not be prepared, gas is cheaper. Convinced that with the current forgetfulness it is safer, gave in. And then she got used to it, although she is not usually friendly with technology.
And how I liked it - while my husband was cleaning the snow, put the meat on, I didn’t believe that 20 minutes was ready !!! So I begged for money for a new toy,

just 5 thousand - the amount for us, while I am sitting on maternity leave for 20, we live for four, one of them is a student in a distant city ... Oh, that's how he grumbled when he bought out that this was his scholarship 3.5 months, and they say, out of envy, it just caught fire)))

Girls, maybe someone needs to be in Achinsk or nearby Element black? It turned out that I made an order, not knowing what to pick up only in Achinsk, and not in Moscow. They sent me an SMS that until 19.03 inclusive it will be at the point of issue.

Soon a year, as I have Element, and still do not understand - how it differs so much from Panasonic, Redmond or shteba to be 2-3 times more expensive). Cooking - and cooking. Usually cooks, let's just say)
In my opinion, the price in the region of 5 sput is its "ceiling". Who bought it cheaper - lucky, more expensive - hmm, well, they do not regret it, and this is the main thing. I am not going to buy an electric pan at the price of a budget stove or oven)

I am not going to buy an electric pan at the price of a budget stove or oven)

I don't know how comparable a multicooker is with a stove and an oven. I put it in the MV and forgot, it will turn itself off. And above the stove you have to stand and adjust.

And above the stove you have to stand and adjust.

My stove is smart, it turns off by itself, goes into heating. Sometimes it pisses me off

and still do not understand - how it differs so much from Panasonic, Redmond or shteba to be 2-3 times more expensive)

Well, me too. Talk psisa talker is present. And so ... I agree
There are two more new ones in Elik's boxes. I left one in Moscow. Not impressed., Not at all. I'm rather slow to my liking)))

My stove is smart, it turns off by itself, goes into heating. Sometimes it pisses me off

Well, you still need to stand over the stove and watch: it has boiled, it hasn't boiled, so reduce it accordingly. Sometimes you reduce it, it stops boiling. The stove must be under control.
With the advent of MB and SLE on the new worktop, I have left only two burners. I practically don't use the stove.
But, as they say: "the taste and color ..."

Girls, but we are not talking about the need / not need for MV as in itself, but about the fact that the Element is not particularly different from all the others. I only like the saucepan in it - I haven't found anything special for myself. And milk porridge only in old Panasonic rule - everything else is not right

It differs, and very much. Convenience. Now I cook cabbage soup only in it, first the broth separately, filter it (but this is always the case, I can't do it any other way), then I put the cabbage, fry, I don't put potatoes, my husband doesn't like it, 30-40 minutes on the soup, and then 2 hours on languor ... Well, in no other device does it work! And after all - self-cleaning, and no cabbage smells, as in Shteba from the ring ...

I also like porridge most of all in the good old Panasonic. Although I cook them in water, it turns out not so tasty in other multicooker. But now I cook first courses and meat only in Elik. Always tasty, always fast, always predictable.

And I liked the porridge from Elik 04 in a ceramic pot. They turn out to be airy and tasty. Everyone uses the devices that suit them. You can use one saucepan and one frying pan in the kitchen. But on this forum, most of this set is not interesting and a lot of time is spent on cooking. Therefore, we use various assistants in order to spend less time on cooking, and preferably without our intervention.

I, too, in this Element are madly in love with Vexation. I have never had such a result on the stove. Why is there a stove ?! ... I'm trying to reproduce a similar mode in other multicooker, but in vain.
I torment almost everything that really torments.
Even all the other Elements that I have in stock still cannot compare with this speaker in terms of the result.

The element is not particularly different from all the others

And it seems to me that it is different. I now cook some dishes exclusively in it. Although there is another pressure cooker, and a multicooker park. And practically each of the devices cooks a particular dish better than others. Each - his own.

And milk porridges only rule in old Panasonic

Here I absolutely agree with you.

I will support. Meat is nowhere else as good as in Elik. Beef or turkey steaks or duck legs, onions, some spices and stew. real jam

Girls and boys, nobody tried to cook mung bean in Elik? I haven't found it yet. I somehow cook a little in it, my hand reaches for the usual Stebe more. But I want to fully enjoy this toy))).

Good day. I read about porridge, absorb information.As an experienced user of the 37501 brand and not an experienced user of the element, I want to ask the craftswomen this question. There is a wonderful way of preparing portioned porridge (any) in a multi brand. As a beginner, I was forbidden to make a link, so I will describe it in my own words. A towel is placed at the bottom, a jar of 0.5 liters is placed on it. with two tablespoons of cereal drenched in milk, pour water around to the level of porridge. on steam mode we cook.
do you think this method can be applied to the element as well. A very convenient way to cook porridge for one person.

I also like porridge most of all in the good old Panasonic. Although I cook them in water, it turns out not so tasty in other multicooker. But now I cook first courses and meat only in Elik. Always tasty, always fast, always predictable.

Panasonic and I have an Element. So in my copy Element for the same time as in Panasonic it turns out exactly the same tasty milk porridge. I was very pleasantly surprised by this.

So in my copy Element for the same time as in Panasonic it turns out exactly the same tasty milk porridge.

The proportions and technology of preparation then to the studio, please))

Beef or turkey steaks or duck legs, onions, some spices and stew. real jam

And I would also like technology too))

A towel is placed at the bottom, a jar of 0.5 liters is placed on it. with two tablespoons of cereal drenched in milk, pour water around to the level of porridge. on steam mode we cook.
do you think this method can be applied to the element as well. A very convenient way to cook porridge for one person.

What is so confusing? That's why we buy multicooker and pressure cooker, so that we can cook without dancing with tambourines ... IMHO