Grater Burner (2)

Even on Prima, you can save on insert 1.6 ... It is not in the kits - it is bought separately for the Trend. And Prima does not need it)))) - Insert 1.6 is replaced by cutting on insert 3.5 in position 2) And for the money saved, you can buy some separate grater - at least the same waffle) Or an insert of 10 mm - many for love potatoes.

I was inclined with the Trend grater due to the fact that you can buy a 1.6 mm insert for it, but it turns out that you can also buy it on Prime

[Slastena]

Slastena, take any, both are good in their own way.
At the very beginning, I got Prima, but since I wanted insert 1.6, I decided to buy the Trend. The Trend works for me every day, and I take it in my hands only when I need the thinnest cut on the plug. If I buy a Trend cap for thin slicing, then Prima will be remembered only in the summer season.

As it is in Prima there is no thickness of 1.6, if the insert 3.5 is adjusted to two thicknesses 3.5 and 1.6 just. Here I cut everything and took pictures,
https://Mcooker-enn.tomathouse.com/in...=com_smf&topic=170448.580

And if you do not take into account the thickness of the cut, which is more convenient in the hands .. prima or trend?) And the fact that in a trend you cannot cut into a very large thickness, about 8 mm, do you need it, or is it just somehow inconvenient ??
I have a trend. and I thought to take it to my mother ...

Prima is very comfortable in the hands

[Sandy]

Sandy I looked at the photo report I was convinced by 5+ I also wanted a 10 mm insert I need to buy it or it can also be adjusted on Prima
and what about "Carly"

[Slastena]

Slastena You will have to buy a 10 if you like larger cubes, such as French fries. On the Prime, the largest is 7 mm, the adjustment goes down.

Carly - a separate grater, salad.

[Sandy]

Sandy I looked at the photo report I was convinced by 5+ I also wanted a 10 mm insert I need to buy it or it can also be adjusted on Prima
and what about "Carly"

I bought a 10 mm insert, I cut potatoes for frying, and in soup, only for soup, I cut it across with a knife in a holder so that not long cubes are obtained, but slightly elongated cubes, unfortunately it is not regulated, but I am very much in demand.
Carly bought one of these days, a good grater, for cutting cabbage, the girls cut, I cut the Peking, though I have to cut the upper soft leaves with a knife first, because Carly is shaggy, and closer to the thick sheet it cuts wonderfully and quickly. You can also make cucumbers in a salad with interesting wavy chips, carrots, etc. etc.

Girls, I finally made friends with my vegetable peeler, so conveniently I have never peeled potatoes, super, I generally keep quiet about carrots. And most importantly, kaaaak fast. Uncle Berner is great

available in Ulyanovsk
It costs 200 rubles. True, they recently contacted them, they said. which is not available now, but should be, wait for delivery. Well, it was a couple of weeks ago, maybe it was already delivered.

Oh, girls, they killed me on the spot! It was I, at the suggestion of Tanya, pestered them and drove over my ears. I thought to buy the Trend itself (the difference with Ozone is 25 rubles), and everything else was on Ozone.
Now I'm stumped again. Here, damn it, in such a huge Russia figs you will find just a plug-in.

[Sandy]

Sandy a peeler with a round handle or ...

Tanya, you are my darling-help! I'll go right now.

There is even a very rare item in stock - a 4.5 mm knife insert, a bit wider than the 3.5 mm one included in the kit.

There is even a very rare thing in stock - a 4.5 mm knife insert, a bit wider than the 3.5 mm one included in the kit.

And what, there are such? Are you confusing anything? On Trend, do I understand?

There is even a very rare thing in stock - a 4.5 mm knife insert, a bit wider than the 3.5 mm one included in the kit.

Somehow, the order is not processed. I'll call them tomorrow, or rather it will be.

And what, there are such? Are you confusing anything? On Trend, do I understand?

Yes, Borner has them, but I only met once in the shops in a year somewhere. And here today I saw.

And what, there are such? Are you confusing anything? On Trend, do I understand?

Already looked. Yes exactly. I also want for carrots for pilaf. Interesting is this difference of 1mm. noticeable when slicing?

Double-sided grater TWIN TREND - Tanya, what kind of fruit is this? Is it worth the fight? Or as a Combichipser?

And what, there are such? Are you confusing anything? On Trend, do I understand?

Here, look at the Bourner website below there is a plate with all their graters and inserts, and there it is at the end of the plate. Called: Additional insert 4.5 mm "OPTIMA", "TREND", "PROFI"

Here, look at the Bourner website below there is a plate with all their graters and inserts, and there it is at the end of the plate. Called: Additional 4.5 mm insert for the "CLASSIC", "VIP" and "PRIMA" models. But it is also written that it is no longer produced. So on the site, the link to which I gave, there is a rarity.

So it is written there Trend.
Already edited. Thank you. I realized. It is a pity that they were removed from production.

Double-sided grater TWIN TREND - Tanya, what kind of fruit is this? Is it worth the fight? Or as a Combichipser?

I don’t see her. From the name - it is not clear what it is. Maybe millet was called something differently. And here, for the inserts, the box, as I bought, is handy. True, I have more than three inserts, I will buy another one. It's inexpensive.

So it is written there Trend. In the store, I mean.

That I did not copy. Look above, I fixed it in my post.

For me, too, 3.5 is thin for pilaf, and 7 is thick, and when I bought a grater and saw that it happens 4.5, I was looking for it very much, but in the open spaces of Ukrainian stores, I never found it. And I needed 10 mm. The girls advised me to buy a Kombichipser. It cuts in 10mm and 5mm sticks. Even 5 mm would suit me better than the 4.5 mm insert, which is quite a bit wider than 3.5. I started collecting information on the combichipser and found more bad reviews than good ones, that it is harder to rub on it than on an additional 10 mm insert. And I decided to wait, that maybe 4.5 mm will appear, then I'll buy it. And I already have 10 mm. So the Russians already have it. Maybe they will be delivered to us.

For me, too, 3.5 is thin for pilaf, and 7 is thick, and when I bought a grater and saw that it happens 4.5, I was looking for it very much, but in the open spaces of Ukrainian stores, I never found it. And I needed 10 mm. The girls advised me to buy a Kombichipser. It cuts in 10mm and 5mm sticks. Even 5 mm would suit me better than the 4.5 mm insert, which is quite a bit wider than 3.5. I started collecting information on the combichipser and found more bad reviews than good ones, that it is harder to rub on it than on an additional 10 mm insert. And I decided to wait, that maybe 4.5 mm will appear, then I'll buy it. And I already got 10 mm. So the Russians already have it. Maybe they will be delivered to us.

Directly my thoughts were posted. 10mm. we have, I bought directly with a grater + 1.6+ a plug. Interestingly, 4.5 has just appeared or is ending? : - \ Still a knife-less thicker and with knives 13-14mm ...

Directly my thoughts were posted. A 10mm. we have, I bought directly with a grater + 1.6+ a plug.

Come on to YOU, okay? And I will also buy insert 1.6, although I have Roko. It seems to me that on insert 1.6 it will be nice to put potatoes on potato pancakes. And Roko - for a carrot, so that she was even, pretty.

Come on to YOU, okay? And I will also buy insert 1.6, although I have Roko. It seems to me that on insert 1.6 it will be nice to put potatoes on potato pancakes. And Roko - for a carrot, so that she was even, pretty.

Okay, for YOU. For some reason I don't use 1.6. Once I only rubbed carrots, I did it with mayonnaise. It is necessary to test it on shingles, a good idea.

[TABLEWARE66]

Girls who will turn to TABLEWARE66 (Tanya gave the above), this is in Yekaterinburg. I took a stub from them for the Trend just. But after one order, why does it no longer allow me to complete the order, when I enter my city, everything stops and writes that there is no delivery to my city at all, they say, only by Eka-that delivery.So watch carefully. Hopefully someone will have a ride. I also wanted to order an insert for 4.5, but alas. I wrote to them, they are silent like partisans.

Girls, for clarity, rubbed carrots on Trend 1.6 and Prime. On the Trend on the left, the straw is even on all sides. On the Prime on the right, the width is 3.5, the thickness is 1.6 I like it on Trend, I use it very often.



For pilaf and onion, and chopped carrots by 7.0, it's not large, just right, try it. During the stewing, the carrots break into pieces without turning into porridge.
In Central Asia, carrots for pilaf are chopped very large, and onions are generally cut into quarters or halves.

I also cut onions for 7, and carrots, then 3.5, then 7. I personally like 7, and I know that it is necessary, even this is small, we have a lot of "Eastern cuisine" in Crimea, everything is large there cut, so juicier, but my children are mischievous, then sit and choose carrots.

If I buy a Trend cap for thin slicing, then Prima will be remembered only in the summer season.

Margit, your comparison of Prima and Trend is insanely interesting - after all, not many of us here used both.
But I must disappoint you: the cap in Trend has an average cutting thickness between thin and thick bladeless. You do not need it: the same subtlety as the minimal one in Prima cannot be provided by the Trend even with a stub.

[Tan]

not, Tan, I'll bite you a little now for such words

So leave for half a day, and here already such battles
Butterscotch, what a shame, right? Personally, your insult makes me madly happy. So you finally made friends with Prima, hurray !!! And then there is a jewel at the cupboard, and she does not use it almost

[Sandy]

Sandy a peeler with a round handle or ...

I have a round handle

I also cut onions for 7, and carrots, then 3.5, then 7. I personally like 7, and I know that it is necessary, even this is small, we have a lot of "Eastern cuisine" in Crimea, everything is large there cut, so juicier, but my children are mischievous, then sit and choose carrots.

I also cut the onion into 7 mm cubes, and 1.6 mm only into raw minced meat on dumplings

Hello everyone!!! Thank you for this wonderful topic !!! I read almost the entire thread about vegetable cutters, CONCLUSION: I want to !!!! )))))

[set]

set Want!)) And buy! A very necessary thing in the household

Apparently they started to buy actively and Ozone decided not to miss the moment to earn

So be determined, otherwise they will raise without embarrassment

Girls sell a new Primo with a box for storing inserts.
I bought through a joint venture from Germany
I bought 2pcs, one for myself, the second for a gift to my godmother on the day of cooking, and she saw mine, caught fire and went to herself bought the same in the store
Price 450 UAH (in our store such a set costs 650 UAH)
Odessa, delivery to another city by New mail at the expense of the buyer.

Girls sell a new Primo with a box for storing inserts.
I bought through a joint venture from Germany
I bought 2pcs, one for myself, the second for a gift to my godmother on the day of cooking, and she saw mine, caught fire and went to herself bought the same in the store
Price 450 UAH (in our store such a set costs 650 UAH)
Odessa, delivery to another city by New mail at the expense of the buyer.

Prima with boxing for 450 UAH? It's so cheap

Hello everyone!!! Thank you for this wonderful topic !!! I read almost the entire thread about vegetable cutters, CONCLUSION: I want to !!!! )))))

You definitely need to take it, you won't regret it

[TABLEWARE66]

Girls who will turn to TABLEWARE66 (Tanya gave the above), this is in Yekaterinburg. I took a stub from them for the Trend just. But after one order, why does it no longer allow me to complete the order, when I enter my city, everything stops and writes that there is no delivery to my city at all, they say, only by Eka-that delivery. So watch carefully. Hopefully someone will have a ride. I also wanted to order an insert for 4.5, but alas. I wrote to them, they are silent like partisans.

Dynamite cellar, Cookware 66 "rested in the bose".I just called them - the online store does not work, the site is not updated, there is NOTHING Borner!
Oh, there is also a bummer with Ozone! God, give me strength to survive these Pangs of Desire!

Prima with boxing for 450 UAH? It's so cheap

Thank you

TAKE !!!!! ))))))

agreed

Girls learned to cut into cubes
at first it turned out only with rhombuses, and then I tried to turn the fruit holder not by 45 degrees, but even more, and lo and behold, the desired cubes began to turn out
I cut raw vegetables into "7" in this way, folded them in layers (first a beet, carrots on top, potatoes on top) them in a steam basket in a slow cooker, boiled them, added onions and pickled cucumbers, which were also chopped, seasoned with butter and a beautiful vinaigrette is ready! very quickly and conveniently, so I would cut equally and finely for a very long time,
it’s a pity just that “10” in the example will not work like that, otherwise it wouldn’t have a price

and then I tried to turn the fruit holder not by 45 degrees, but
even more and lo and behold, the desired cubes began to turn out

And the holder did not move? Somewhere I seem to have read that 45 degrees is precisely because the holder itself does not fall on the knives by the end of the product, otherwise the whole hat will be cut

I checked - someone asked Berner himself on the forum, it says that at an angle of more than 45 degrees, the holder's cap sits past the rails and touches the knives.

[Slastena]

Slastena in Ozone only orange rose in price, white and red Prima 2000 exactly. Cheaper Trend for 1750

And the holder did not move? Somewhere I seem to have read that 45 degrees is precisely because the holder itself does not fall on the knives by the end of the product, otherwise the whole hat will be cut

I checked - someone asked Berner himself on the forum, it says that at an angle of more than 45 degrees, the holder's cap sits past the rails and touches the knives.

to be honest, I didn't notice, it's just that I have it already pounded because of previous experiments, when it accidentally missed it, it went off the rails

but in general it shouldn't, I don't put it across, but just turn it a little more

Favorite girls: flowers: congratulate me I got sick: doctor: diagnosis: Berner addiction is necessary, torment you for two days and now I want any, if only I was in my hands, mania is straight

[Slastena]

Slastena in Ozone only orange rose in price, white and red Prima 2000 exactly. Cheaper Trend for 1750

If! Yesterday it was 1575. "Those yesterday were three at a time ... and today, at five, well, very ..." Snotty kiss on time!

Favorite girls: flowers: congratulate me I got sick: doctor: diagnosis: Berner addiction is necessary, torment you for two days and now I want any, if only I was in my hands, mania is straight

As annnushka27 correctly said, everyone here probably went through it, so you are not the first, you are not the last

selling Additional insert 1.6 mm to the set of the "Classic" model. ordered a prima grater and add. inserts to her = and so one insert was sent to the classic. bought for 250 rubles. selling for 200. respectively new. Moscow.

girls, but I now want a vegetable cutter I will also accept a vegetable cutter combi chef, I understand that some functions are duplicated, but I just can't help myself

[set]

setBuy both if you can. Try it at work, take a closer look - which one you like best and is more useful in practice. The second, if anything, then you can give it to someone from your family.

Girls, who has Prima, how thick do you cut cabbage for pickling?

Girls, who has Prima, how thick do you cut cabbage for pickling?

I am on the second after the thinnest on the knifeless insert, but in general it is probably to your taste, I do not like when the cabbage is thickly chopped, and the carrots are there by 1.6 mm.

[marabusha]

Girls, I sent an order yesterday marabusha , I hope it will pass! I suffered for a long time, chose. the head is already like u, I thought it would explode!
I sent the order, but doubts still remain. At first I did not understand anything about these graters ... then, thanks a lot, they helped a little arrange on the shelves in my mind. then she began to rush between TREND and PRIMA. Okay, I think, take it this way (after all, we take it) I'll take a V5 PRIMA set and an additional 10mm insert, Pizza and Carly. she refused from Rocco, but now I think, maybe in vain? Do I need it or not? Can Korean carrots be grated on another or not? I don't work it often ... and the price, so the order was collected ...
The set, if I understood correctly, includes Baby and Wafelka graters.