Grater Burner (2)

I went to measure, on a knifeless Prima a maximum of 8 mm

What did you measure with this? Toffee had a current of 6 mm.
But the main thing is that I have a sirish Trend. So even if Prima gives 8 mm, they are not enough for me, and Fakelman is cheaper than Prima

What did you measure with this? Toffee had a current of 6 mm.
But the main thing is that I have a sirish Trend. So even if Prima gives 8 mm, they are not enough for me, and Fakelman is cheaper than Prima

I mean, what ... shredded the potatoes into slices on Prima without a knife in the last position, then cut off the strip so that Mona could lean against the ruler ...

Duc chunks what? I can't identify it from the photo. Different hardness results in different thicknesses.
Huh. Potatoes? Do you have potatoes in the photo? Did not recognize

Duc chunks what? I can't identify it from the photo. Different hardness results in different thicknesses.

Duc potato same .. the peel is visible unwashed

That I already

And what did she cut? Can't you move the insert completely?

In my opinion, carrots.
In short, I still don't have Prima, so the Prima thickness is not so important to me.

There, in the last position, even if you measure with a ruler from the knife to the insert, it turns out 8 mm. If I need to take a picture tomorrow

In my opinion, carrots.
In short, I still don't have Prima, so the Prima thickness is not so important to me.

The very fact of 6.5 and 8 is still a difference ...

What did you measure with this? Toffee had a current of 6 mm.

vvvot exactly, 8 mm did not work for me in any way, we can press even more

Today I got to the exhibition and saw finely chopped cabbage when asked how they cut it, they answered that it was with a rocco grater. Who already has a grater? Have you tried to chop cabbage there?

Hurray for the third Cn to be. I’ll just order a carly for myself and another thread, the atoms are somehow costly, even after the holidays. Super

I, too, now really look forward to the third call !!!!!! I've been dreaming of Berner for a long time, but the price was embarrassing, but for Cn it seems much cheaper !!! So there is one more owner in the joint venture!

Today I got to the exhibition and saw finely chopped cabbage when asked how they cut it, they answered that it was with a rocco grater. Who already has a grater? Have you tried to chop cabbage there?

Roco is a Korean carrot grater. Did they say Rocko exactly, not Carly? It's good to grind cabbage on Carly. And I make carrots on Roko. Here, look at the photo here. The one on the right is on Roko.
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=170448.0

I made cabbage on Roko - I almost get small crumbs.

I, too, now really look forward to the third call !!!!!!

is the third run planned here?
And I really don't need anything ... the mustache will be after 2 SP, the whole set
I think maybe I need to get an additional holder

[Nelya]

Nelya, and I ordered a spare holder for the UZHO in the second joint venture, because after receiving the grater from the first joint venture, my holder is already scratched all over (testing of all positions is intensively going on, including all family members).

So the holder from the second joint venture - I will not allow anyone from my family to pick it up ... NO-NO .....

I would be glad if all members of my family tried it intensively .. but I have it too bad

I think maybe I need to get an additional holder

and what's the point of buying a holder in Germany and paying for its postage, is it worth 10 kopecks there, that it will be profitable to send it

They said that on Roko, and I already have Carly, so they cut potatoes on her and said that you can make chips at home

and what's the point of buying a holder in Germany and paying for its postage, is it worth 10 kopecks there, that it will be profitable to send it

and suddenly it breaks. or are they reliable?

and suddenly it breaks. or are they reliable?

that I am not in the sense that it will not break or break
I'm talking about the fact that I see no reason to bother with a parcel from Germany for the sake of the holder - what is the benefit of writing it out from Germany, is it really, really cheap there?
they are on sale with us, by the way, I have 2

so I'm green. but we don't have that. I didn’t look at the hop we have it, but the Germans seem to be 3.99 (Natasha, if not true, then correct it).
and if, indeed, there will be 3 campaigns for graters ... maybe I will order, but I will change Bebik to Primovskaya.
And mustache, I don't need anything else

Ah-ah-ah, if it's green, then you can order 2, we definitely don't have
Yeah, if there is a 3rd joint venture, then order a spare green holder, otherwise you won't find it with us.
I myself would not refuse the green Prima, I love this color, but mnu is orange

I already fell in love with her!
the more the kitchen, if I am going to update, I want in light green tones. very sunny side, and already tired of the beige color.
right now, as I walk past the household china shops, I rush to the green

Girls, and where you can see what exactly you can order, the range, so to speak ... treat with a reference, pliz ...

I went today after my Prima on the Trend to show a master class ... I don't even know ... Either I am emotionally attached to her, or the cabbage is solid and the Trend is only 3 thick ... knobs after Prima, you can't grab onto the Trend right away ... but it was uncomfortable, unusual, uncomfortable and the master class didn't work out, everything somehow got stuck

vvvot exactly, 8 mm did not work for me in any way, we can press even more

Iruska, why are you pushing the Berner ... it’s just like clockwork ... whack
Here, the thickest slice, this is if you completely remove the bladeless one, but it's very inconvenient and you can't cut a lot, and it turns out very thick. Most of all it is 8 mm as for eggplant for example.

Oksan, did you measure it on the skin, not in the center? Look, your skin does not go in a straight line, but at an angle. Kind of like a leg to the hypotenuse The hypotenuse is always longer, but we need a leg! Maybe the dog rummaged in this? So much for one and a half mm of difference.
Well, and, perhaps, each grater of a trosh is individual. Plus different products give different thickness.

Oksan, did you measure it on the skin, not in the center? Look, your skin does not go in a straight line, but at an angle. Kind of like a leg to the hypotenuse The hypotenuse is always longer, but we need a leg! Maybe the dog rummaged in this? So much for one and a half mm of difference.
Well, and, perhaps, each grater of a trosh is individual. Plus different products give different thickness.

I can measure it in the middle ... fig knows it ... the potato was crooked and I was in a hurry, that's why it turned out so unevenly
To cut carrots chtol?

Here ... I will not calm down in any way





I measured the middle

Here you are an experimenter
Well, it means that graters do have individual characteristics.

Probably....

Here you are an experimenter
Well, it means that graters do have individual characteristics.

my husband measured the layers with a compass, it is more accurate than a ruler, and the thickness of 8mm never worked

my husband measured the layers with a compass, it is more accurate than a ruler, and the thickness of 8mm never worked

My husband will come and take from him (if there is one) a barbell - a compass, and I will measure it again

My husband will come and take from him (if there is one) a rod - a compass, and I will measure it again

can you use it?
no, how many did not explain to me, it does not reach me, apparently I

can you use it?
no, how many did not explain to me, it does not reach me, apparently I

So the husband will measure it is just already even interesting is it the error of the ruler or the Prima themselves are different

it's just that it's even interesting if the ruler is in error or the prims themselves are different

I think the error can be explained:
1.with different hands - we apply different forces
2.different vegetables - harder, softer, etc.
3.maybe different graters from different batches have some small errors

Iriskin, Duc do I doubt you? And don't even think about it
Eh, but I know how to play with a barbell! But I don't have a barbell. And I don't have Prima

here you are given these 1-2mm
already attracted husbands

so this is the case when size matters

Eh, and I know how to play with a barbell! But I don't have a barbell. And I don't have Prima

And I can, and I have neither one nor the other. I’m lying on the couch with my laptop while I’m reading your research.

Oh, girls ... what I learned ... it turns out there are knifeless plug-in to the Trend ..., but I, it turns out, do not have it ... but I, it turns out, need it !!!
Oh, poor me, poor, stupid Nanai girl ... how can I now live without her ...

Oh, girls ... what I found out ... it turns out, there are ... but I, it turns out, do not have her ... but I, it turns out, need her !!!
Oh, poor me, poor, stupid Nanai girl ... how can I now live without her ...

About how many wonderful discoveries we have ... this forum is preparing And the knifeless for the trend and the pancake maker Orion is the current beginning.

Song, is there a Trend itself? The kit also includes a knifeless insert.
Or do you mean a placeholder?

Song, is there a Trend itself? The kit also includes a knifeless insert.
Or do you mean a placeholder?

Of course, a stub !!! What is not you panic write with frustration!
And I have a Trend for a long time ... And somehow I managed without a stub, after all, until I knew about it

About how many wonderful discoveries we have ... this forum is preparing And the knifeless for the trend and the pancake maker Orion is the current beginning.

Not knifeless, but a stub. And Orion is yes! Well, what can you object to? I'm weak for this business ..., there is such a thing ......... Can't you see it from the icons below?

Not knifeless, but a stub. And Orion is yes! Well, what can you object to? I'm weak at this business ..., there is such .........

That nothing .. here everyone is like. From here, either run away without looking back or accept and buy everything you really need, without which you can't live.

Of course, a stub !!! Why not panic with frustration!
And I have a Trend for a long time ... And somehow I managed without a stub, after all, until I knew about it

And what part of the Volga? They sent me from Ulyanovsk. Cellar. ru is called. Delivery only ...

I bought a combichipser today, I was waiting for it for almost a month until it was brought to the store. I tried and was upset: some uneven slices are obtained, torn. It would be better if I ordered a 10mm insert to my Prima. And their price is the same. I will order the insert. Girls who tried to cut both on the insert and on the combichipser, is there a difference? Maybe it’s me just a side-handed?

I bought a combichipser today, I was waiting for it for almost a month until it was brought to the store. I tried and was upset: some uneven slices are obtained, torn. It would be better if I ordered a 10mm insert to my Prima. And their price is the same. I will order the insert. Girls who tried to cut both on the insert and on the combichipser, is there a difference? Maybe it’s me just a side-handed?

I once had a question - what to buy. I was advised against combichipser, it is heavier on it. Although there are 2 cutting thicknesses - 10 mm and 5 mm. As a result, it happened, one kind soul gave me a 10 mm insert. It comes out very wonderfully on it and rubs very easily. And in borschiki, soups, and in stews and fry potatoes. We can say that it is the most demanded insert. So buy it, you won't regret it. And I also ordered a 4.5 mm insert for Macabushe. This is probably like the second thickness of a combichipser. Actually, because of this size, I first wanted to take the combichipser, because 4.5 mm inserts are not sold here. Therefore, I was very happy to learn that it can be ordered from Germany.
Or maybe you practice a little and everything will come out half better. At least, even if you buy 10 mm in addition, then you will be using a combichipser for 5 mm blocks. There seems to be no additional insert for Prima. Don't get upset like that right away.

I bought a combichipser today, I was waiting for it for almost a month until it was brought to the store. I tried and was upset: some uneven slices are obtained, torn. It would be better if I ordered a 10mm insert to my Prima. And their price is the same. I will order the insert. Girls who tried to cut both on the insert and on the combichipser, is there a difference? Maybe it’s me just a side-handed?

On page 30, Monica showed cubes and slices on a combichipser how she did it.

Girls, and I have more combichips than the insert for 10
There are only potatoes on it, I also like that on a combo you can cut potatoes neatly without a holder: girl_red: there are no leftovers at all.

I got used to it, and everything is ok

I have a classic Rocko since the summer - at first I did not lie to her, but for the last 3 months I have been constantly in motion. Either carrots in Korean soda, then a brush-type salad with various variations (I add daikon or green radish to beets and raw carrots, cabbage on it is also shredded into this salad).
And what I noticed - if you rub in one direction - then the cells do not become clogged practically and there is no dirt around. And if you rub in both directions - PPC, dirt around from debris and gets stuck in the cells - then you will be tortured to pull it out.