|
Technical characteristics of the multicooker Supra MCS-5110
Code: MCS-5110
Power: 900 W
Bowl volume: 5 l
Bowl coating: non-stick
Display: digital LED
Management: electronic
Number of automatic programs: 11
Multi-cook function: yes
Multipovar plus function: no
Steam cooking: yes
Frying: yes
Deep fat: no
Yogurt: yes
Auto heating: yes
Indication: sound signaling of readiness
Delayed start: yes, up to 24 hours
Maximum timer setting time: 24 hours
Recipe book as a gift: yes
Equipment
Multicooker 1pc.
Bowl 1pc.
Power cord 1pc.
Steaming container 1pc.
Measuring cup 1pc.
Spoon 1pc.
Operation manual 1pc.
Warranty card 1pc.
Description of multicooker Supra MCS-5110
The device consists of a body in which a bowl with a non-stick coating is installed.
The case is closed from above with a lid. To open a closed lid, you must first press the button located on the lid.
A removable steam valve is installed on the lid, designed to release excess steam and hot air generated during the operation of the device.
There is a heater inside the body, on which the bowl is tightly installed.
In the center of the heater there is a spring-loaded sensor that monitors the progress of cooking programs.
A control panel with buttons and a display is located on the body.
On the back of the case there is a socket for connecting the multicooker power cord.
Under the hinge of the lid, there is a removable container for collecting condensate.
In addition, the multicooker kit includes:
• The spoon
• Measuring cup
• Grid for steaming
Control Panel
The SUPRA MCS-5110 multicooker is equipped with a quasi-touch control panel with a display.
Control buttons:
"START" - button for selecting an automatic cooking program.
"TIMER" - the button for switching to the mode of setting the delayed cooking start time and moving to setting the temperature in the "MULTI COOK" mode.
"TEMPERATURE MAINTENANCE / CANCEL" -
stop the automatic program, cancel the setting made and start the heating function.
"+" - button for increasing the time value in the time setting modes; temperature increase in temperature selection mode.
"-" - button for decreasing time value in time setting modes; decrease in temperature in temperature selection mode.
Display
The display shows program parameters such as time, temperature during setting and operation.
Preparation for operation
Before using this unit for the first time, please read the instruction manual carefully and keep it as a reference. Correct use of the appliance can significantly extend its life.
Operating the multicooker
Before using
Remove the product and its accessories carefully from the box. Remove all packing materials and promotional stickers except the serial number sticker.
The absence of a serial number on a product automatically voids your right to warranty service.
Wipe the body of the instrument with a soft, damp cloth. Wash the bowl and other accessories with warm soapy water and dry thoroughly.
When using the device for the first time, a foreign smell may appear, which is not a consequence of a malfunction of the device. In this case, we recommend that you clean it completely.
Place the appliance on a firm, level, horizontal surface to prevent accidental spilling of liquid from the bowl. The device must be located so that the escaping steam does not fall on electronic devices, objects and surfaces that may suffer from high humidity and temperature. Before preparing food in the multicooker, make sure that its external and visible internal parts are not damaged, chipped or other defects. There must be no foreign objects between the bowl and the heating element.
Important! Cleanliness and tight contact of the surfaces of the heater and the bowl are the key to the correct operation of the multicooker and the exact implementation of the specified modes!
Setting the cooking time
In the SUPRA MCS-5110 multicooker, the user can independently adjust the cooking time set by default for many programs. The increment and possible setting range depends on the selected cooking program.
To change the cooking time:
1. After selecting a cooking program, the display shows the preset running time for that program.
2. Press the "-" button to decrease the time. If the button is held down for a few seconds, the value will change rapidly.
3. Press the "+" button to increase the time. If the button is held down for a few seconds, the value will change rapidly.
4. At the end of the time setting, if you do not press the control panel buttons for about 5 seconds, the selected program will start.
To cancel the settings made, press the button
"Maintain temperature / Cancel", after
then re-enter the entire cooking program.
When setting the cooking time, take into account the possible setting range and the setting step provided for the selected cooking program, in accordance with the “Factory settings table” (page 21).
Delayed start function
The function allows you to set the time after which the selected cooking program will be executed. You can postpone the start of the program in the range from 30 minutes to 24 hours with a setting step of 30 minutes.
1. Select and set a cooking program.
2. Press the "TIMER" button to turn on the ready time setting mode. The display starts flashing "00:00" minutes.
3. Press the "+" button to increase and press the "-" button to decrease the time in 30 minute increments. If the button is held down for a few seconds, the value will change rapidly.
4. At the end of the time setting, if you do not press the buttons for about 5 seconds, the time value will stop flashing and the Delayed Start function will start. The display will show a countdown and the indicators for the selected cooking program will light up.
5. To cancel the settings made, press the "Maintain temperature / Cancel" button, then re-enter the entire cooking program.
The delayed start function cannot be recommended for cooking some dishes, for example, from frozen food, i.e. food may lose its properties during the timer.
It is not recommended to postpone the start of the program for a long time if the recipe contains perishable foods (eggs, fresh milk, meat, cheese, etc.).
Maintain function
temperature of ready meals (automatic heating)
It turns on automatically immediately after the completion of most cooking programs and can maintain the temperature of the finished dish within the range of 65-75 ° C for 24 hours.
When automatic heating is in operation, the display shows "-: -".
If necessary, auto-heating can be turned off by pressing the "Maintain temperature / Cancel" button.
General cooking tips
To obtain a high-quality result, we suggest using recipes for cooking dishes from the recipe book attached to the SUPRA MCS-5110 multicooker, developed specifically for this model.
This book is the result of a lot of hard work. All presented recipes were developed and prepared in the SUPRA MCS-5110 multicooker by our team of chefs, and all the products used in their preparation were purchased in regular stores.
The ingredients specified in the recipes, their weight, proportions, instructions for setting the temperature and time or using automatic cooking programs were carefully selected taking into account the volume and type of products, as well as the peculiarities of the operation of this multicooker model. The book contains a lot of tips from our chefs that you will surely find useful.
If, in your opinion, you have not succeeded in achieving the desired result on automatic programs, the SUPRA MCS-5110 multicooker provides a universal MULTIPOOK program and the ability to change the time of automatic programs, which open up great opportunities for your culinary experiments.
Return to factory settings
Changes made by the user to the parameters of the cooking program are not saved in the multicooker memory.
The next time automatic mode is switched on, the display will show the factory settings for the program parameters.
RIS program
The program is recommended for cooking rice and preparing various side dishes.
1. Measure and prepare ingredients according to recipe, transfer to bowl. Make sure that all ingredients (including liquid) are below the maximum mark on the inside of the bowl.
2. Insert the bowl into the body of the device, make sure that it is firmly in contact with the heating element.
3. Close the cover until you hear a click. Connect the device to the mains.
4. Pressing the "START" button, select the "RIS" program.
5. The display will show the default cooking time.
6. If necessary, press the "-" and "+" buttons to set the cooking time.
7. If necessary, set the delayed start time.
8. Do not press any panel buttons for 5 seconds. The cooking program starts and the time counts down.
9. At the end of the cooking program, a signal will sound. The device will go into auto-heating mode (the display will show "-: -").
10. At the end of the cooking program, a signal will sound. The device will go into auto-heating mode (the display will show "-: -").
If the expected result has not been achieved, refer to the Cooking Tips section, where you can find answers to your questions and get the necessary advice.
SOUP program
The program is recommended for preparing various broths and first courses, as well as compotes and drinks.
1. Prepare ingredients according to recipe, transfer to bowl. Make sure everyone
ingredients (including liquid) were below the maximum mark on the inside of the bowl.
2. Insert the bowl into the body of the device, make sure that it is firmly in contact with the heating element.
3. Close the cover until you hear a click. Connect the device to the mains.
4. Press the "START" button and select the "SOUP" program.
5. The display will show the default cooking time (55 minutes).
6. If necessary, press the "-" and "+" buttons to set the required cooking time.
7. If necessary, set the delayed start time.
8. Do not press any panel buttons for 5 seconds. The cooking program starts and the time counts down.
9. At the end of the cooking program, a signal will sound. The device will go into auto-heating mode (the display will show "-: -").
ten. To cancel the entered program, interrupt the cooking process or turn off the automatic heating, press the "Maintain temperature / Cancel" button.
If the expected result has not been achieved, refer to the Cooking Tips section, where you can find answers to your questions and get the necessary advice.
Frying program
Recommended for frying meat, vegetables, poultry, seafood.
1. Prepare ingredients according to recipe, transfer to bowl. Make sure that all ingredients (including liquid) are below the maximum mark on the inside of the bowl.
2. Insert the bowl into the body of the device, make sure that it is firmly in contact with the heating element.
3. Close the cover until you hear a click. Connect the device to the mains.
4. Press the "START" button and select the "FRY" program. The display will show the default cooking time (15 minutes).
5. If necessary, press the "-" and "+" buttons to set the required cooking time.
6. If necessary, set the delayed start time.
7. Do not press any panel buttons for 5 seconds. The cooking program starts and the time counts down.
8. At the end of the cooking program, a signal will sound. The device will go into auto-heating mode (the display will show "-: -").
9. To cancel the entered program, interrupt the cooking process or turn off the auto-heating, press the "Maintain temperature / Cancel" button.
If the expected result has not been achieved, refer to the Cooking Tips section, where you can find answers to your questions and get the necessary advice.
We recommend that you follow the instructions in the recipe book and stir the contents of the bowl periodically to avoid burning the ingredients.
Cooking according to this program is also possible with the lid of the multicooker open.
BAKING program
Recommended for baking biscuits, casseroles, yeast dough and puff pastry.
1. Knead the dough following the directions in the recipe of your choice. Place the dough in a bowl.
2. Place the bowl in the multicooker body. Make sure all ingredients are below the 1/2 mark on the inside of the bowl. Make sure it is firmly in contact with the heating element.
3. Close the cover until you hear a click. Connect the device to the mains.
4. Press the "START" button and select the "BAKE" program.
5. The display will show the default cooking time (60 minutes).
6. If necessary, press the "-" and "+" buttons to set the required cooking time.
7. If necessary, set the delayed start time.
8. Do not press any panel buttons for 5 seconds. The cooking program starts and the time counts down.
9. At the end of the cooking program, a signal will sound. The device will go into auto-heating mode (the display will show "-: -").
10. To cancel the entered program, to interrupt the cooking process or to turn off the automatic heating, press the “Maintain temperature / Cancel” button.
If the expected result has not been achieved, refer to the Cooking Tips section, where you can find answers to your questions and get the necessary advice.
Before using flour, it is recommended to sift it to saturate with oxygen and eliminate impurities.
We do not recommend using the Delayed Start function, as this may affect the quality of the baked goods.
Do not open the lid of the multicooker until the end of the baking process! The quality of the baked product depends on this.
To shorten the cooking time and simplify cooking, we recommend using ready-made mixtures for baking.
Milk Porridge program
Recommended for preparing various milk porridge.This program is cooked with a slower approach to boiling to prevent milk from boiling over.
1. Measure and prepare ingredients according to recipe, transfer to bowl. Make sure that all ingredients (including liquid) are below the maximum mark on the inside of the bowl.
2. Insert the bowl into the body of the device, make sure that it is firmly in contact with the heating element.
3. Close the cover until you hear a click. Connect the device to the mains.
4. Press the "START" button to select the "MILK Porridge" program.
5. The display will show the default cooking time (60 minutes).
6. If necessary, press the “-” and “+” buttons to set the required cooking time.
7. If necessary, set the delayed start time.
8. Do not press the panel buttons for 5 seconds. The cooking program starts and the time counts down.
9. At the end of the cooking program, a signal will sound. The device will go into auto-heating mode (the display will show "-: -").
To cancel the entered program, interrupt the cooking process or turn off the automatic heating, press the "Maintain temperature / Cancel" button.
Recommendations for cooking milk porridge in a slow cooker
The program "MILK Porridge" is intended for cooking porridge from pasteurized milk of low fat content. To avoid boiling milk and get the desired result, it is recommended to do the following before cooking:
• thoroughly rinse all whole grain cereals (rice, buckwheat, millet, etc.) until the water is clear;
• grease the multicooker bowl with butter before cooking;
• strictly observe the proportions, measuring the ingredients according to the recipes from the recipe book;
• reduce or increase the amount of ingredients only proportionally;
• when using whole milk, dilute it with drinking water in a 1: 1 ratio.
The properties of milk and cereals, depending on the place of origin and manufacturer, may differ, which sometimes affects the cooking results. If the desired result was not achieved in the MILK PORSE program, refer to the Cooking tips section or use the multi-cook program. Set the amount of ingredients and cooking time according to the recipe.
EXTINGUISHING program
Recommended for stewing vegetables, meat, poultry, seafood.
1. Prepare ingredients according to recipe, transfer to bowl. Make sure that all ingredients (including liquid) are below the maximum mark on the inside of the bowl.
2. Insert the bowl into the body of the device, make sure that it is firmly in contact with the heating element.
3. Close the cover until you hear a click. Connect the device to the mains.
4. Press the "START" button to select the "EXTINGUISHING" program.
5. The display will show the default cooking time (40 minutes).
6. If necessary, press the "-" and "+" buttons to set the required cooking time.
7. If necessary, set the delayed start time.
8. Do not press any panel buttons for 5 seconds. The cooking program starts and the time counts down.
9. At the end of the cooking program, a signal will sound. The device will go into auto-heating mode (the display will show "-: -").
10. To cancel the entered program, to interrupt the cooking process or to turn off the auto-heating, press the “Maintain temperature / Cancel” button.
If the expected result has not been achieved, refer to the Cooking Tips section, where you can find answers to your questions and get the necessary advice.
STEAM COOKING program
Recommended for steaming vegetables, fish, meat, manti, dietary and vegetarian dishes, children's menu.
1. Pour 600-1000 ml of water into the bowl.Place a container for steam cooking in the bowl.
2. Measure and prepare the food according to the recipe, spread it evenly in the steaming container and insert the bowl into the appliance body. Make sure the bowl is firmly in contact with the heating element.
3. Close the cover until it clicks, connect the device to the mains.
4. Press the START button to select the STEAM program.
5. The display will show the default cooking time (120 minutes).
6. If necessary, press the "-" and "+" buttons to set the required cooking time.
7. If necessary, set the delayed start time.
8. Do not press any panel buttons for 5 seconds. The cooking program starts and the time counts down.
9. At the end of the cooking program, a signal will sound. The device will switch to auto-heating mode (the display will show “-: -”.
10. To cancel the entered program, to interrupt the cooking process or to turn off the auto-heating, press the “Maintain temperature / Cancel” button.
If the expected result has not been achieved, refer to the Cooking Tips section, where you can find answers to your questions and get the necessary advice.
If you are not using a recipe when setting a cooking time for this program, use the Chart for Recommended Steaming Times for Different Foods.
PASTA program
Recommended for preparing a variety of pasta.
The program ensures a neat cooking without boiling.
1. Prepare ingredients according to recipe, transfer to bowl. Make sure that all ingredients (including liquid) are below the maximum mark on the inside of the bowl.
2. Insert the bowl into the body of the device, make sure that it is firmly in contact with the heating element.
3. Close the cover until you hear a click. Connect the device to the mains.
4. Pressing the "START" button, select the "PASTA" program.
5. The display will show the default cooking time (30 minutes).
6. If necessary, press the "-" and "+" buttons to set the required cooking time.
7. If necessary, set the delayed start time.
8. Do not press any panel buttons for 5 seconds. The cooking program starts and the time counts down.
9. At the end of the cooking program, a signal will sound. The device will go into auto-heating mode (the display will show "-: -").
10. To cancel the entered program, to interrupt the cooking process or to turn off the auto-heating, press the “Maintain temperature / Cancel” button.
If the expected result has not been achieved, refer to the Cooking Tips section, where you can find answers to your questions and get the necessary advice.
Dumplings program
The program is recommended for preparing dumplings, dumplings, dumplings, baked fruits, etc.
1. Prepare ingredients according to recipe, transfer to bowl. Make sure that all ingredients (including liquid) are below the maximum mark on the inside of the bowl.
2. Insert the bowl into the body of the device, make sure that it is firmly in contact with the heating element.
3. Close the cover until you hear a click. Connect the device to the mains.
4. Pressing the "START" button, select the "PELMENI" program.
5. The display will show the default cooking time (30 minutes).
6. If necessary, press the "-" and "+" buttons to set the required cooking time.
7. If necessary, set the delayed start time.
8. Do not press any panel buttons for 5 seconds. The cooking program starts and the time counts down.
9. At the end of the cooking program, a signal will sound.The device will go into auto-heating mode (the display will show "-: -").
10. To cancel the entered program, to interrupt the cooking process or to turn off the auto-heating, press the “Maintain temperature / Cancel” button.
If the expected result has not been achieved, refer to the Cooking Tips section, where you can find answers to your questions and get the necessary recommendations
MULTIPOOK program
This program is designed to cook almost any dish according to user-specified temperature and cooking time parameters. Thanks to the MULTIPOOK program, the SUPRA MCS-5110 multicooker can replace a whole range of kitchen appliances and will allow you to cook a dish according to almost any recipe that interests you.
The temperature range is from 30 ° C to 180 ° C in 10 ° C increments.
1. Prepare the ingredients according to the recipe. Spread them out evenly in the bowl and insert it into the body of the appliance. Make sure that all ingredients, including liquid, are below the maximum mark on the inside of the bowl. Make sure the bowl is firmly in contact with the heating element.
2. Close the cover until you hear a click. Connect the device to the mains.
3. Press the "START" button to select the "MULTI-COOK" mode. The display will show the default cooking time (60 minutes)
4. Press the "+" and "-" buttons to set
required cooking time
5. Press the "Timer" button - turn on the cooking temperature selection mode. The display will show the default cooking temperature: 100 ° C.
6. Press the buttons "+" and "-" to set the required cooking temperature.
7. If necessary, set the delayed start time.
8. Do not press the panel buttons for 5 seconds, the program will start and the cooking time will count down.
9. At the end of the cooking program, a signal will sound. The device turns off (the display shows "88:88").
10. To cancel the entered program, to interrupt the cooking process or to turn off the auto-heating, press the “Maintain temperature / Cancel” button.
In the MULTIPOVAR program, you can prepare many different dishes. Use our recipe book from our professional chefs or the table of recommended temperatures for preparing various dishes and products in this program.
If the expected result has not been achieved, refer to the Cooking Tips section, where you can find answers to your questions and get the necessary advice.
YOGURT program
Yogurt is a fermented milk product with useful properties, popular all over the world. With the help of the YOGURT program, you can prepare a variety of delicious and healthy yoghurts at home.
1. Prepare ingredients according to recipe, transfer to bowl. Make sure that all ingredients (including liquid) are below the maximum mark on the inside of the bowl.
2. Insert the bowl into the body of the device, make sure that it is firmly in contact with the heating element.
3. Close the cover until you hear a click. Connect the device to the mains.
4. Pressing the "START" button, select the "YOGURT" program.
5. The display will show the default cooking time (6 hours).
6. If necessary, press the "-" and "+" buttons to set the required cooking time.
7. Do not press any panel buttons for 5 seconds. The cooking program starts and the time counts down.
8. At the end of the cooking program, a signal will sound. The device turns off (the display shows "88:88").
9. To cancel the entered program or to interrupt the cooking process, press the
"Maintain temperature / Cancel".
If the expected result has not been achieved, refer to the Cooking Tips section, where you can find answers to your questions and get the necessary advice.
For making yoghurts, you can use the special set of yoghurt cups.
Additional features
Proofing dough
Proofing (raising) is the most important stage in the dough preparation technology immediately before baking. During the molding process, the porosity of the dough is disturbed, almost all carbon dioxide comes out of it. During the proofing, intensive fermentation takes place with the formation of up to 95% of carbon dioxide, the structure of the dough is restored and its volume increases to 50-70% of the original. One of the main conditions for a successful process is the absence of drafts and maintaining a constant temperature and air humidity, for which special cabinets are used. With the help of the SUPRA MCS-5110 multicooker in the MULTIPOOK program, you can create the most favorable conditions for proving the dough at home.
Making fondue
Fondue is a family of Swiss dishes cooked over an open fire in a special heat-resistant dish called caquelon (translated from French - "melted") and used in the company. Fondue is usually seasoned with garlic, nutmeg. Pieces of bread, potatoes or other products (gherkins, olives, etc.), planted on special long forks, are dipped into the resulting mass. There are several types of fondue, the most famous are Swiss, French, Italian, and Chinese. With the SUPRA MCS-5110 multicooker in the MULTIPOOK program you can prepare fondue at home.
Cooking curd
Cottage cheese has been known to man since ancient times. Of all dairy products, it is the richest in protein, which is very easily absorbed by the body. There is also a lot of calcium in the cottage cheese, which is useful for teeth and bones. It is a good source of vitamins and minerals that increase the body's resistance to infections and normalize the metabolic process.
With the SUPRA MCS-5110 multicooker you can quickly and easily make homemade cottage cheese, which can be used as an end product or as an ingredient in other dishes. Follow the recommendations for cooking from recipes located on the recommended Internet resources.
Cooking cheese
Cheese is another representative of fermented milk products, the manufacturing technology of which was familiar to our distant ancestors. Today, hundreds of varieties of cheese are known, each of which has its own fans. In terms of protein content, cheese is ahead of meat or fish. In addition, it contains amino acids, vitamins, phosphorus, zinc, calcium and other useful substances that are important for our body.
Now in the SUPRA MCS-5110 multicooker you can easily cook great natural homemade cheeses and experiment with their tastes by adding various fillings. Follow the recommendations for cooking from recipes located on the recommended Internet resources.
The properties of the products used can vary depending on the place of origin and manufacturer, which sometimes affects the cooking results.
Preparing baby food
With the advent of the baby, the mother adds a lot of trouble in caring for the child, to whom almost all her free time is devoted. The SUPRA MCS-5110 multicooker will help to facilitate the solution of many issues related to the nutrition and care of a child at different stages of growth and development.
Sterilization
Until your baby's immune system is sufficiently strong, sterilizing food utensils will help protect him from many harmful bacteria. The most effective methods are considered to be sterilization using water (autoclave) or steam. In the SUPRA MCS-5110 multicooker, you can create both steam and water (medical) sterilization methods, which are fast, simple and effective.
For bottles and large items (water-based autoclave method)
one. Fill the feeding bottles with water, seal the lids and place
in the bowl. Fill a bowl with water up to the neck of the bottles. Place the bowl in the body of the appliance, make sure that it is firmly in contact with the heating element.
2. Close the cover until it clicks, connect the device to the mains.
3. Press the "START" button to select the "SOUP" program.
4. The display will show the default cooking time (55 minutes).
5. Press the “-” and “+” buttons to set the required sterilization time.
6. If necessary, set the delayed start time.
7. Do not press any panel buttons for 5 seconds. The cooking program starts and the time counts down.
8. At the end of the cooking program, a signal will sound. The device will go into auto-heating mode (the display will show "-: -").
9. To cancel the entered program, interrupt the sterilization process, press the "Maintain temperature / Cancel" button.
At the end of the program, remove the bottles from the bowl and leave them closed. In this form, they will be sterile for up to 12 hours. Empty the bottle if necessary and use it as directed.
For nipples and small items (steam method)
1. Place small items (teats, cutlery, etc.) in the steam container.
2. Pour 600-1000 ml of water into the bowl, place the bowl in the body of the device, make sure that it is firmly in contact with the heating element. Place the container in the bowl. Close the lid until it clicks, connect the device to the mains.
3. Press the "FUNCTIONS" button to select the "STEAM" program.
4. The display will show the default cooking time (120 minutes).
5. By pressing the "-" and "+" buttons, set the required sterilization time.
6. If necessary, set the delayed start time.
7. Do not press any panel buttons for 5 seconds. The cooking program starts and the time counts down.
8. At the end of the cooking program, a signal will sound. The device will go into auto-heating mode (the display will show "-: -").
9. To cancel the entered program, interrupt the sterilization process, press the "Maintain temperature / Cancel" button.
At the end of the program, all items placed in the container will be sterilized.
Pasteurization
The process of one-time heating of liquid products to 60 ° C for 1 hour or to a temperature of 70-80 ° C for several minutes is used to disinfect products, as well as to extend their shelf life. The nutritional value of the products during pasteurization practically does not change, all the taste and valuable components (vitamins, enzymes) are preserved. Pasteurized food should be stored at low temperatures for no more than 24 hours. In the SUPRA MCS-51103 multicooker you can pasteurize products using the MULTI-COOK program.
At the end of pasteurization, remove the processed product from the multicooker, cool and store in a cool place.
It is not recommended to use the Delayed Start function during pasteurization.
Multicooker care
Care and cleaning instructions
Before you start cleaning the product, make sure that it is disconnected from the mains and completely cooled down! Use a soft cloth and non-abrasive dishwashing detergent. We advise you to clean the product immediately after use. Before the first use or to remove odors after cooking, we recommend that you process half a lemon in a multicooker for 20 minutes in the STEAM COOKING program.
DO NOT use a sponge with a hard or abrasive coating, cleaners with abrasive particles, aggressive solvents (gasoline, acetone, etc.). Cleaning the case
Clean the casing of the product as needed, in accordance with the Instructions for Care and Cleaning of the Device.
Bowl cleaning
Recommended after each use in accordance with the Instructions for the care and cleaning of the device.You can use a dishwasher with neutral detergent and warm water. When finished, wipe the outside of the bowl dry. Installation of a wet bowl in the multicooker body is not allowed.
Cleaning the inner aluminum cover
Clean the inside of the lid as needed, in accordance with the Instrument Care and Cleaning Guidelines.
Cleaning the removable steam valve
The steam valve is located on the top cover of the appliance.
1. Remove the steam valve from the cover by pulling it
up.
2. Disassemble the steam valve by turning the bottom counterclockwise.
3. Flush both sides of the valve with water in accordance with the Instrument Care and Cleaning Guidelines.
4. Assemble the steam valve in reverse order. Align the grooves in the retainer with the corresponding tabs on the inside of the valve cover and turn the bottom of the valve clockwise until it stops.
|
