Furniture for kitchen

I was looking for nightlights for children, one is afraid of the dark .. running after me at night I was looking for ledovskoe on aliexpress that the thread is economical and interesting .. started with simple ones for 5 bucks. Then I accidentally saw these aquariums. They are different. I went to YouTube and dug up videos, figured out suitable ones with good reviews and where they swim more beautiful and natural. I returned back to Ali, there I eliminated the cheapest ones and chose my own. Don't buy square ones without a picture on the rear window - it's too boring and not natural. With a picture it looks like in the sea and swims better. And if the stones are on the bottom so finally.

khe-khe .. you can't forbid living beautifully. Today one said that he had bought 140 (!) Sockets in his house under construction .. we then thought we figured out what kind of house it should be .. skoka masters

I have 15 sockets in my kitchen and it turned out to be few. Electricians told me when they put it, but I did not believe ((((((There are not enough rooms too. So for me 140 is normal.
I will try to count:
1 refrigerator
2- conder
3 - coffee machine
4 - computer (there is a whole filter powered)
5.TV
6 - cartoon
7.-blender
8.Juicer \ Sandwich Maker
9.-for equipment that I take out periodically (6-9 with one ruler above the tabletop)
10.cooker (ignition) \ extractor (I don't use it much, it buzzes too much)
11. oven
12.mikra
13.dishwasher
14.bread maker
15. harvester \ kettle

And since we are always stuck in the kitchen, they try to put all their phones on charge in the kitchen (my husband has 2 mobile and 1 working PDA and I have 1). Therefore, she will come to the kitchen .. you click on the machine with a kettle .. you wait ... you wait .. you wait .. but the tea does not boil .. oops .. and there is a charger ..))))

Good is this kitchen..140 -15 = 125? where else 125? We made three sockets in the nursery, well, there are all kinds of double triple. And then they thought that it was a lot of stuck. We'll take the computers into the salon, otherwise you won't see children from the bedrooms. So for a computer desk and a TV set, huge boards with a bunch of holes were mounted, that is, like an eight-piece, in short, one such board, and there are many holes for plugs in it. But this is considered ONE outlet, it just has a lot of holes in it. And here there are 140 separate ones, I think there are a lot of meters and rooms.

and what kind of plateau is this? will you show? Does Creamy in my kitchen have more than 30 outlets? maybe I'm wrong

Good is this kitchen..140 -15 = 125? where else 125? We made three sockets in the nursery, well, there are all kinds of double triple. And then they thought that it was a lot of stuck. We'll take the computers into the salon, otherwise you won't see children from the bedrooms. So for a computer desk and a TV set, huge boards with a bunch of holes were mounted, that is, like an eight-piece, in short, one such board, and there are many holes for plugs in it. But this is considered ONE outlet, it just has a lot of holes in it. And here there are 140 separate ones, I think there are a lot of meters and rooms.

we don't have a plateau .. 4 separate sockets are taken, but without strips and covered with one large bar .. so I counted these one at a time ...
Well, I'll count then: I have two sockets on the lodge .. in one chest freezer .. the other is left for a vacuum cleaner or tools, in the other lodge - one, in the bedrooms in the area of ​​5-6 sockets .. (TV set on the wall, condender, 2 lamps , 2 free for laptops / chargers / vacuum cleaners). there are 2 sockets in the room and there is not enough ... (one of them was generally obscured by a wardrobe, which was not planned) ... a bathroom - two ... Total 32-33 in total. This is a 3-room apartment. The house may still have basements \ garages \ storage rooms \ saunas \ several toilets .. well, yes .. agreed .. for 140 outlets this is a large house ... 2-3 floors ..

we don't have a plateau .. 4 separate sockets are taken, but without strips and covered with one large strip ..so I counted these one by one ...

I'm not an electrician .. maybe it's called a box? We have such email. boxes with cells. You can shove into the cells what you want, you can just like these sockets with three holes, where it's empty we'll shove another 4 (!) Two-pin sockets. They take up half the space. Described clearly? You can push the switches there. That is, in the course of life, you can change everything, like a constructor.
Above there will still be a frame, it's just that there is such a long-term construction that you don't want to write anything besides the mat. First, the walls were painted white, and yesterday they poured concrete .. of course, the walls are dirty .. and the floor, as it was, was crooked, it remained crooked .. just a layer of concrete overhead grows and grows

Of course, this box is at such a level that it will hide behind a large TV set, and the second one behind a computer desk. But any extension tees are no longer needed.

Thank you! boom know-what is there

Who has a detergent dispenser in the kitchen? Where to mount it? In the countertop, or in the sink? There is a mixer in the middle of the sink, but it doesn't seem beautiful from the side ...

the main thing is that it would be convenient. If there is a place in the sink, then it is better to mount it in the sink, since it will also have to be washed.

Who has a detergent dispenser in the kitchen? Where to mount it? In the countertop, or in the sink? There is a mixer in the middle of the sink, but it doesn't seem to be beautiful from the side ...

look at Dopleta ... she showed ..

Who has a detergent dispenser in the kitchen? Where to mount it? In the countertop, or in the sink? There is a mixer in the middle of the sink, but it doesn't seem to be beautiful from the side ...

Depends on the shape of your sink. It was convenient for me like this:

🔗

I have this
There is a mixer in the middle, but where to put the dispenser in, it seems like not ... Probably have to be in the countertop

It is better to place the dispenser on the site of the sink itself. I have a bad experience with pipettes. I bought two expensive chrome-plated dispensers in a specialized salon very expensive, they served very little. Copper, which serves as a substrate under the chrome plating, has reacted with the composition of liquid soap in the bathroom and detergent in the kitchen, their stem is completely jammed. To get rid of an unnecessary hole from a faulty countertop dispenser, the entire kitchen countertop had to be changed. Therefore, I advise you to drill a hole for the dispenser on the sink itself. In which case, it is easier to change the sink and the costs will be lower. Now I use non-built-in plastic dispensers and nothing gets jammed. Probably, all the same, the matter is in the chemical inertness of the plastic.

Thanks for sharing your experience. I'll try to put it in somewhere at the sink.
Can I change the dispenser to a new one? Or did you not want more? Perhaps another firm?

Can I change the dispenser to a new one? Or did you not want more? Perhaps another firm?

Can! They usually have the same diameter. I changed.

Doesn't water collect under the dispenser? If you put it on the countertop, will it not get wet under it?
Something I did not take into account the dispenser when choosing a sink ..
And I also want to draw your attention to those who are going to order the kitchen to the very ceiling. Such a kitchen is attached directly to the walls. I wanted to go to the very ceiling, but they did not explain to me that the back wall also had to be made of chipboard then, and in the end I had to hang it with a small distance from the ceiling.
I could, of course, wait until they redo it, but I didn’t ... And so I’ve been waiting since February ... Not a serious office I ordered with radius facades, instead of a month I was told to wait one and a half 2 would have to wait, but then take, but half years ... either they have radial facades of the wrong color, then the car is being repaired, then the furniture maker is on a business trip ... And also, I did not draw up any papers, I can not even complain anywhere We have a small village, everyone knows each other , and work on trust ...
Maybe someone will find our sad experience useful

Our village is small, everyone knows each other, and they work on trust ...

Eh, trust is not valuable today

the village is small, everyone knows each other, and they work on trust ...

so go to the director of this office or break the face or take out the glass in the hut.
immediately start up.
trust is what is good?
In firms and large companies - contracts.
if on trust - then teeth. Well, in the sense of losing teeth. As a forfeit.

and then you go to jail, or maybe even worse
--
I will listen to some of the locals (Moroccans), they are so burnt .. I record everything on a dictaphone. And then OPA And we are burdocks .. everything is the old-fashioned way and then we sit at the broken trough like fools

Yes, trust is not valuable
And the teeth ... I wanted to somehow be peaceful, good) But if only a little more, then it would be as if the teeth would go
This is what I wrote so that others would learn from mistakes. After all, it is possible and compensation would be some kind of legal claim, for failure to fulfill the contract, and maybe everything was done on time.

I record everything on a dictaphone. And then the OPA

Wow?
This is strict now.
just do not write to the recorder. They write on HD video.
I literally had a story that week when recording one conversation helped me GREAT.
Now this is almost the norm.
Of course not in everyday life
But in any slightest CASE it is strict.
and then, in the world of modern technologies it became JUST tea not in the times of Stirlitz.
I quote:
Well I couldn't tell, sorry party, Genosse Bormann, I need to rewind the tape! (c) Stirlitz in a conversation with Shelenberg.

The voice recorder in the phone, of course, not like in this movie:

on the phone, of course

It's hard to believe ... but the video is on your phone too!

Although there are options, to be serious.
I have several active microphones (micro microphones).
From them it is simply more convenient (much better) to write the voice of the conversation than just on the microphone of the phone / communicator.
Well, then the writing phone is often visible.
But the microphone from the phone can be pinned not tensely for the person you are talking to
By the way, in addition to various social and legal aspects, the recording of a conversation is often convenient because, having listened to it "later," you perceive some business aspects of the conversation differently. You can hear better - where they lied :-)

Wonderful suburban kitchen option

And also a great option for small-sized kokhons

refrigerator dream

Wonderful suburban kitchen option

Why only a summer residence?
I know families where they don't cook at all. This is just for them.

I think most of the kitchens are small

refrigerator dream

This is the kitchen floor under the refrigerator! (If you take my 8 meters.)

I think most of the kitchens are small

refrigerator dream

And it stands, I suppose, like an airplane

Wow, cool shelf!

Now I know where to fit a hefty chess box

I don't know where to go, a person with experience will suddenly read it. People, how much more does the laminate take when laid diagonally? I sit and count my square meters, enough / not enough

I calculated that I have a floor area of ​​53 sq. meters, the laminate is 32 packs of 2.13 sq. m. total 68.16 sq. m. Enough for the diagonal, given that there are 4 rooms? If not, how much should you buy?

I don't know where to go, a person with experience will suddenly read it. People, how much more does the laminate take when laid diagonally? I sit and count my square meters, enough / not enough

Writing vessels, there people also hang out repair.

I don't know where to go, a person with experience will suddenly read it. People, how much more does the laminate take when laid diagonally? I sit and count my square meters, enough / not enough

I calculated that I have a floor area of ​​53 sq. meters, the laminate is 32 packs of 2.13 sq. m. total 68.16 sq. m. Enough for the diagonal, given that there are 4 rooms? If not, how much should you buy?

look here (here and the formula is, how to calculate)

[argo]

argo, thank you very much

update, more details 🔗

update, more details

🔗

Just painted the kitchen. Nothing else has changed

My God, how do you want a large, spacious and roomy kitchen! And if there is also a dining room! ...

My God, how do you want a large, spacious and roomy kitchen! And if there is also a dining room! ...

I don't know where to go, a person with experience will suddenly read it. People, how much more does the laminate take when laid diagonally? I sit and count my square meters, enough / not enough

If there is no graphics program, open Paint.
Draw the kitchen to scale, then the laminate flooring to scale and ...
If this is not overcome. Take a piece of paper in the box. Draw a kitchen plan. From whatman paper, also to scale, laminate and ... Count the whole first, and then the pieces. And if you also paint in the same color those cells where the trimming and small inserts, so as not to get confused. Well, or write in one number. I hope it's clear.
So is the tile.
It is possible to count by area, but difficult to predict. And so before you is a cheat sheet.
Let's say I pasted over the kitchen, there are whole stripes and a lot of pieces. The wallpapers are expensive, I also painted and looked how it would be more profitable for me to cut these wallpapers.
I really do everything on the pc.

Pichenka, thanks for the advice. Only I'm afraid it will take a lot of time to draw, since I have 4 rooms + a corridor + a fourth room that is not of the correct shape. According to Argo's link, my husband counted and we even have 10 sq. meters of excess laminate. Tomorrow I will recount-check myself

[Gypsy]

Gypsy, I once was puzzled by the same question during the repair period. Subtracted that when laying the laminate diagonally, it must be taken 15% more than when laying it along the wall.

[Gypsy]

Gypsy, I once was puzzled by the same question during the repair period. Subtracted that when laying the laminate diagonally, it must be taken 15% more than when laying it along the wall.

no, that won't work. There it is necessary to count each room separately. For example, scraps from one large room are less than 4 small ones. Is it logical? And the area is the same. Read the article on the link Argo, they describe everything well how to lay it more economically .. you need to lay it from the middle, then you can adapt more scraps.

Pichenka, thanks for the advice. Only I'm afraid it will take a lot of time to draw, since I have 4 rooms + a corridor + a fourth room that is not of the correct shape. According to Argo's link, my husband counted and we even have 10 sq. meters of excess laminate. Tomorrow I will recount-check myself

Well, not so long.
Of course, if there are no problems, then no. And when, during the repair, every penny counts and you don't want to spend too much, and if not enough.
I have a goatass-handedthe locksmith while installing the towel dryer - had to change 8! ! Large tiles. okay, the rest behind the sliding curtains.
As the moron slashed the pipe with a grinder, so from top to bottom in the tile is a black strip with twisted sand or metal splashes. Now it's better, but before with diphcyitis, try to buy it later.
I'd rather not sit at night, but I’ll count everything to the point.
And the exact plan of the apartment must be done.
For example, I have a plan of the walls where the wires are laid, or a plaster partition - there is a met profile in the same place. And I already clearly know where you can drill, and where you will get into the void. Well this is my IMHO.

or a plaster partition - in the same place a met profile. And I already clearly know where you can drill, and where you will get into the void. Well this is my IMHO.

uh .. and a magnet for what?

And my husband has a device (mine detector - I call it), which detects different objects (wires, profiles) in the walls.

And my husband has a device (mine detector - I call it), which detects different objects (wires, profiles) in the walls.

Tell me what the device is called? It is necessary to attach 2 new sockets, but there are great suspicions ... Already six different "conductors" have tried to determine whether the wall can be drilled, but they do not show more than 10 cm from the old outlet and switch In old houses they show the presence of wiring from half a meter, and + -1 cm inside the wall, but we have like lead walls! I know that if there are three wires in the cable, one of which is grounded, then they emit less, but not to the same degree.