Steam cleaner (steam generator)

[Olga VB]

Olga VB, Olya, have you ordered additional nozzles? Interested in their cost

Sorry for wedging in, extra, nozzles for the Karcher cost 450r small 4pcs, for windows somewhere 1000r, I found out, only in nali it was not yet

Why a gas chamber? Does a couple form a lot?

it is impossible to use detergents, it is dangerous to health. they mix with steam to form such a chemical mixture that you can suffocate.

Liked the Kittens. I would like to buy .... but I do not know which one. Girls, share your experience who cleaned the clothes. Namely a suit made of wool, is it possible - not? Sometimes there is simply no time to dry-clean. I have already read a lot of forums, but I cannot decide.

a suit made of wool, can I - can I not?

If the wool is clean, then you can, but be careful - from a distance of at least 10 cm. If synthetics or lycra are added to the wool, then be even more careful, we increase the distance. Do not forget that the outlet steam temperature is 100 degrees, with increasing distance the temperature decreases and is no longer dangerous for the fabric.

Thank you.

[diana7dg]

diana7dg, Hello Irina. I have a question for you: do the attachments from a small manual kitten to a large 904 fit? I ordered this model for myself, I really liked it. Now I think, or order additional nozzles on the manufacturer's website, or take the baby with a bunch of nozzles.

I read almost the whole topic, I wanted it for a long time, chose, compared. chose between a steam cleaner and a steam generator. It's a pity for a vacuum cleaner, especially since I have a vacuum cleaner. I decided to save. It is not known how long I will last with a steam generator. I bought Bomann DR 921 CB, I've been playing for three days. After the repair, I washed the window, doors (mahogany, solid), the kitchen - all those places where I could not get with the chemistry, I slowly get to the bath, I washed the washing machine. A wonderful thing! The fact that there is enough water for 30-40 minutes of work without topping up, suits me - to wash everything and immediately I'm too lazy. In my opinion, the PG has one problem - you need to apply handles, alas, he himself does not wash! Girls who have Boman or Klatronic, tell me, why is there a little thing behind, what is attached there? Tell me, have you found spare brushes somewhere? And many thanks to everyone for the discussions and advice.

I decided to wash the painted refrigerator door with a small round brush. I wanted the best - it turned out as always ... NEVER do this! NEVER!!! I scratched the paint, I had to polish it for a long time. This is what it means - with a bad head, hands (feet) do not rest! You can wash a painted refrigerator, but only with a brush and a cloth!

Thank you for the warning, but in general the refrigerator + steam generator is a dangerous mixture, you always need to be on the lookout

And today I bought a kitforth 905! He has a case of accessories larger than himself.

[julli]

julli, congratulations, let him only make you happy.
Girls, where do you use brass brushes and do they scratch surfaces a lot?

Girls, who has Karcher 1020, if after work there is water in it and you drain it, is it all completely drained? I can't completely drain the leftovers, when you shake the steam generator you can hear the splashing of water, and you can see it (with a flashlight), even when it was upside down, it was shaking.

It's strange, everything seems to merge with me, but after work I keep it with the lid open so that the leftovers evaporate if they suddenly remain, and it is better to use it to the end

everything seems to merge with me, but after work I keep it with the lid open

Yes, I also keep it open, but the amount of the remaining water is not a drop, maybe you will observe it when you work and do not use all the water, then write.

Now I try to use the entire tank so that there is nothing to drain, well, and I store it with the lid open.

well, and I store it with the lid open.

that's right, once it jammed it, in general, the lid could not be moved, turned on the software, bleed off all the steam, it was useless, my husband opened it with a wedge

I had a couple of times wedged clathronic lid with completely vented steam. I take it apart, open the plastic case, then the lid twists

I take it apart, open the plastic case, then the lid twists

there is nothing to disassemble in Karcher 1020

I know I have it too. But I didn't get it

Girls, and I am so happy aaaa (TTT)! I have a cat, so I removed SO MUCH hair from the rug using software

Eh! And I got sick with a steam cleaner-steam generator.
Bowing to Domain CS 6
pros
Parameters, build quality, European
I tried it and liked it.
Sad from the price. But good things are not cheap.
I went through printers and multicooker

Bowing to Domain CS 6

For girls it seems ... just this model of domains (at the beginning of the topic was discussed) But I don't remember who has a Star, no? Aunt Basie's? No, we discussed it too long ago, I don’t remember exactly. Or was it the 5th model?
Anyway, they praised her a lot.

So I used it there
At one time, I also bought a second multicooker.
I bought a cheap one first. I realized that I liked the idea. Then she looked around - and asked the lucky owners - to give them the opportunity to cook. I was given such an opportunity: yes: Now I went the other way. I didn't buy cheap Chinese. And looked where that is.
I asked to try.
Tried
1) Soap laminate floor - class - the floor is not wet, clean. And you can put on a cheap rag
2) I cleaned the tiles, the rug - with the same cloth (naturally, I started with them and then the floor)
3) I cleaned the apron and the tabletop with a narrow nozzle - with a bang
4) Steam clothes with the same attachment
You need to adjust - but in general mentally
5) I steamed linen pants with an iron - very sincerely (I will try them with my own iron - in order to understand I need an iron and I can do without it
Now in thought - where to get
(France, Moscow. St. Petersburg)
In France - it's clear - the homeland of the goods and all that. They also have the Crystal modification - it is convenient that all the attachments fold into the petals of the pocket
Moscow - found it cheaper by 4,000 rubles (almost the cost of an iron
St. Petersburg - there is a Showroom - where it will be possible to look and decide - whether the iron of the Domain - about 4500 Comfort - a steamer Kitaychonok - to help.
Yesterday I realized that a steam cleaner is not a luxury and not a divorce (as someone wrote here - I don't remember who - but I would like to ask the author What model did you test?) But a very good assistant in cleaning the house

Girls like ... just this model of domains (
who has a Star, no? Aunt Basie's? :

And the star has and Aunt Basie has
The model is the same 6th. Someone is brown-yellow and someone is creamy - brown.
And there is also a blue one - 4th
white-cherry - NRT

And the star has and Aunt Basie has
The model is the same 6th.

ABOUT! So I remember correctly

The agony of choice is over
Ordered Domena cs6
With an iron, an iron attachment (recommended for synthetics) and a spare cartridge (Let it be - the pocket does not pull the stock)
I'll go pick up tomorrow

Yesterday I realized that a steam cleaner is not a luxury and not a divorce (as someone wrote here - I don't remember who - but I would like to ask the author What model did you test?) But a very good assistant in cleaning the house

I agree completely. It will not be easier to clean, but the speed is significantly reduced. I bought a used one on Avito literally 2 months Karcher 1020.At first I wanted a small one, but for 3600 it was hard to deny myself the pleasure of buying a large one. She did not regret a single gram. I realized it would be more difficult for me to carry the jug. Heats up quickly. In general, I am very pleased with this model. Immediately I bought more absorbent rags, the main helpers when working with this unit. The tabletop sparkles, all sorts of appliances, including a stainless steel plate, were expelled with a bang! I just put steam everywhere and wipe it with a cloth. Somewhere I saw in the video the use of metal sponges, well, maybe it's not metal, but some kind of shavings, in general, planted it on a small nozzle and wiped off an apron or a work surface from the fat, whoever it is convenient to say. The hood did not clean up in any way, I wash it in the dishwasher, so it knocks out fat several times. I advise those in doubt to take. I thought for 2 years, and when I saw such a convenient option for me, I immediately ran after him. Yes, even in enter, I immediately bought small brushes for 390 rubles, 195 of them paid thanks from the Savings Bank very conveniently, that is, there are no problems with accessories. Yes, and I liked the big wash mirror. Ferry first. Then with a paper clip and along the edges I walked with a dry cloth. Fast and clean. Thanks to the forum and the girls who unsubscribe here. I can’t live without you. Thanks everyone

Good afternoon everyone! I have been reading this forum for a long time, and I have long wanted a PG)) And now I specially registered to ask this question. Yesterday my first Kromax Odyssey 430, a jug, came from an Internet store. Poured purified water (about 250 ml), turned it on. A minute later, the water inside gurgled, and steam poured out of the jug. It feels like from all the cracks. From under the feed button, from the seams of the case ... Hot steam and even drops of water. The case heats up instantly - don't touch it. Plugged it out of the socket, cooled it, drained the water. Today I poured it again, already only 150 ml - the same picture. Is this a marriage or am I doing something wrong?

[Zana5]

Zana5, maybe the lid was not completely tightened? I have a big one, but once I didn’t tighten the lid where I was pouring water (I decided to regret the gum for the sealing), so it poured out from under the lid in clubs.

[Alenka212]

Alenka212, the lid really does not work to tighten. I press, I apply efforts, but between the lid and the elastic band it is still almost half a centimeter ... Is it really possible to fasten it tightly?

Such protection is provided there. I don’t know how it happens in small ones.

Zana5, the lid is really not screwed to the end there. I have the same steam cleaner.

[NataliaVoronezh]

NataliaVoronezh, that is, when you heat up, steam does not come out of all the cracks? Is it still my marriage?

It is unambiguous that steam should not come out of the cracks !!!

No, the lid twists, as soon as the clicks go, I stop twisting it, but it does not fit very tightly. And steam from all cracks does not come down.

Thanks for the answers .. Apparently, I will have to return ..

Good evening! it didn't work out for me with the Bomann DR 921 CB. Worked 4 times and stopped letting off steam. I called the service, they said that the steam generator was not being repaired, they wrote an act of return. The money was returned minus two deliveries. So my 4 times cost me 600 rubles and a trip to the service. Since I already appreciated the beauty of the steam generator, the problem of choice again became acute. Again, I read the tips on the forum, I wanted a Domain. But at Damadom's store. ru dissuaded me. I bought Kitfort KT-903. I have already worked with him 2 times. So, in my opinion, the Kit is much more convenient to work with, It takes up less space in storage, all the attachments fit well, the cord is longer and conveniently wrapped, water can be added in the process without stopping. Actually, 30 minutes of work seemed to me enough. but when I started steaming the coat, first for my daughter, two, then for my son, then sweaters ... in short, I still had to top up the water. Much better quality plastic and body and brushes. In Boman I almost cut a brush for 2 times, and Keith has a brass brush for strong dirt. The floor brush is several times more interesting. If my experience is useful to someone, I will be glad.I can't do it with cheap things. I'll get a little more mature and order myself a steam generator with an iron, just for ironing. I almost made up my mind whether I want a Steam generator with a Metalnova Genius Bravo iron or a Steam generator with a Metalnova Vapor 2600 or 2800 iron. Girls, has anyone used Metalnova? The seller on the site praised it very much, but I want to know the impressions from the PG hostesses ...

My soul could not stand cleaning the carpet on all fours with a half-worker Kromax and I ordered the same Karcher 1020 (together with a 75 wiper, walk like that). Once again I vowed to myself that this is the last (at this stage of my life) purchase of equipment.
_{True, the LAST was a robot, the very last vertical grill}
I'm waiting ... Now there will be an opportunity to compare.

[Alenka212]

Alenka212, congratulations. I'm sooo happy with my 1020! There is no place in the house where I would not use it.

I ordered the same Karcher 1020 (together with a 75 wiper, walk like that). Once again I vowed to myself that this is the last (at this stage of my life) purchase of equipment.

Do you have a kind of private house and a lot of windows? So how would you do without a window robot?

[Galina]

Galina, windows so far 15 .... But I only mastered the robot for the floor. We must also think about building materials now. The farm is not completed and unfinished ...
And robots are your fairy tale (now I checked it myself: I iron it, and he polishes the floor with a carpet)

[lega]

legawell tempter! Well, I went straight to the window cleaner: girl_cray: and read ...

girls, and who washes the windows in the old fashioned way with a steam generator and a suction Kercher, do you then wipe the frame with a rag or leave it to dry?

I wipe the frames dry with a rag so that there are no streaks left, and the dirt that was knocked out by the steam must be collected.

[Manna]

Manna, and what attachment do you use? I keep trying the best and fastest way to clean windows (so far without a robot). I put a terry cloth on a hand-held attachment and floated frames and glasses. The rubber bands are somehow scary. Apparently Kromax has a high temperature. She melted the plastic skirting board (fortunately, not in sight) and almost burned a hole in the heating pipe. Then she wiped the frames and glass with microfiber rags.
Maybe somehow you can do it faster?

[Alenka]

Alenka, scroll the topic back and find:

Veronica, it is not necessary to wear a cloth on the main one ... In general, so ... if the glasses are not very dirty, then a glass nozzle (with an elastic band on the edge) will be enough. First, rinse the glass with steam, then run this nozzle with steam over the glass, and then carry it with the nozzle without supplying steam to remove moisture from the glass, wiping the gum every time with a cloth so as not to leave streaks. And if the glasses are stained, then first they can be washed / steamed with the main nozzle with a rag (or I even do it with a round nozzle), and then with a nozzle for glasses ... I don't know if I explained clearly

It didn't work out very well with this attachment. In my PG, it is put on by hand (for furniture, clothes) and, when heated and moved from side to side, strives to jump off. I fought with her and decided to wash with a rag.
And according to the above technology, the frames are washed before or after the glasses and with what?

I wash the frames to the glass with a round nozzle, and then wipe the dirt with a rag.

It didn't work out very well with this attachment.

But what about the Karcher suction wiper? He will be just right here

He is still coming to me ... I am still mentally preparing myself, as it is planned to reinstall the windows in the house. and I just washed them as luck would have it ...
thanks for the information