FameConway
Instructions for the bread maker LG HB-151 JE

Home mini-bakery LG HB-151 JE

Bread maker LG HB 151 JE

Hello!

Such a problem:

The bread maker is new. When the blade is running, a clicking sound is heard when the engine is running. Clicks are similar to discharges when closing, but not loud and do not affect the light bulbs (in theory, they would blink). They are distributed with each revolution.

Has anyone come across?
mish
My Panasonic has snapping during the whole process. The husband said that these modes are switched - electronics ... (the washing machine, by the way, is the same)
FameConway
I would not worry if there were at least once a minute or two, because here at every revolution ...
As if something touches there and sparks (but nothing is visible).
Scary:)
mish
I don’t even know what to say in this case ... I’m probably only asking a question in the workshop until it breaks. Then it will be more difficult to diagnose a factory defect ...
kosmas76
Quote: FameConway

Hello!

Such a problem:

The bread maker is new. When the blade is running, a clicking sound is heard when the engine is running. Clicks are similar to discharges when closing, but not loud and do not affect the light bulbs (in theory, they would blink). They are distributed with each revolution.

Has anyone come across?

The stove is the same and the clicks are the same. similar to electrical discharges. Who knows what it is?
Levushka
And I have the same thing !!! Maybe this is the norm for this model ?!
kosmas76
The clicks continue, the stove works fine. I already stopped noticing them.
olalekhi
I have 202-CE, same problem (or is it not a problem?), Otherwise the stove works fine.
vyacheslav16
Model HB-152, new. Opened the bottom, turned it on. Clicks are static discharges, formed during the operation of the kneader; I suppose, due to the friction of the drive belt (belt) on the pulley (wheel) of the kneader, since the materials of the parts are plastic. In this case, grounding of the x / stove body can help. Strongly I do not advise ground through heating battery or water pipes, since they usually have some kind of voltage ("pickup" from underground cables, etc.)
In principle, there should be no clicks when connected to a Euro socket
(when the socket has a 3rd ground wire).
P.S. I did not have time to test it on my own - the heating element was stuck, I had to hand it over for repair.
Happy test everyone!

sweeta
Well, today I have inexplicable clicks when kneading the dough, the program works fine, the bread is good (t-t-t). But we are only 2 months old! I read it on sites, like this problem often occurs in Skiing ... So, just do not pay attention to it, or do something ??? Who has such a problem, please write, share your experience ...
Prokhor the cat
Good afternoon to all bakers
I bought a ski and faced the same problem - clicks during kneading. I was terribly upset. So is this the norm or should it be returned to the store?
Luysia
I accidentally deleted the post

The oven clicks during proofing and baking (the modes are switched to maintain the desired temperature), and so that there are no extraneous sounds during kneading, dress the mixer well and put the bucket so that it sits plump to the stop.
Prokhor the cat
I only click when mixing. and it looks like a short circuit ((
metel_007
I, too, clicks only when baking. When kneading, it creaks as if it were not smeared. The squeak did not appear immediately, after 4-5 months.
kayra
Where can I find a schematic diagram of the HB-151JE Bread Maker?

All recipes

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers