Electric meat grinder Zelmer 987.80 (discussion and reviews)

[Electric meat grinder Zelmer 987.80]

Electric meat grinder Zelmer 987.80



>>> Review of Zelmer 987.80 electric meat grinder <<<

[Zelmer 987.80]

Zelmer 987.80 against the background of little redmond 01

Tatiana, good day! Thanks for your review! please give me a link where you bought it, otherwise I'm a little confused here. And the question arose after the review, did you have veined meat there, did you then remove the veins from the knife? or chopped everything, nothing wound?

[Natasha]

Natasha, the meat grinder ate everything neatly, all the meat with all the veins. There was nothing left on the knives. There were a few scraps (as in any meat grinder at the end), but I pushed a piece of bread crust through their resin.
The quality of meat grinding can be seen in the photo in the review.



I bought a meat grinder on an Internet in Moscow.
The range of prices is stupid, but if you look, you can buy it at a quite adequate price, mine costs 7200 rubles, even with delivery to my city for only 200 rubles. For such a meat grinder with 6 practical attachments, the price is excellent
I draw your attention to the model Zelmer 987.80 - there is a Zelmer 987.8 model but there is a different set of nozzles

Success in buying - a decent model

Thank you! You have calmed me down! and as I saw the prices on the zelmer shop website, I fainted and fell, and in connection with the fact that there was a link in the topic about the meat grinder, I began to doubt, and suddenly for 5 tons. this is not a real Zelmer. In our city, they are not available in Internet stores, I will also be ordered and wait. Minced meat turned out beautiful, yes. We are waiting for new interesting recipes, you hinted at some plans. Thank you!

[Admin]

Admin, Tanya, thanks for the review! Now I just calmed my Wishlist - I compared it with my old one, the vegetable cutter is exactly the same, however, my Polish assembly

If I needed a second one, I would buy this one right away. Well, I'll continue to use mine.

[Olya]

Olya, Thank you!

The meat grinder struck me with the speed of replacing the attachments, how simple and fast it is, without unnecessary gestures around it and the fact that nothing splashes, does not snort, it is not necessary to clean around it after work - well, maybe just a little
And the number of necessary and demanded and practical attachments
While she is in demand with me in everything, and everywhere I am looking for her application, it remains on the table

Further - wait and see

[Tanya,]

Tanya, from my experience of using this company's meat grinder, I hope that it will not disappoint. Very noisy when working? Are there any spare bushings?

[Olya]

Olya, works very tactfully, did not notice a strong noise And so quickly that you somehow do not pay attention to the noise.
Bushing, hook, brush included.

Somehow, all the equipment is thought out to the smallest detail, and there is nothing to complain about, except for certain points.
And then life will tell you how much it meets our expectations

[Tanya]

Tanya, very nice to read about good technique! There is even a brush! I don't remember whether mine had a brush anymore, maybe it was.

Convenient groove that collects juice as it flows out and does not fall on the table





Press for tomatoes and soft berries in operation
Squeezing lingonberry and squeezing from it.

Here are these extracts-cake and started up today on sugar fruit powder

Colored sugar with natural fillers, instant powder "just add water" (Admin)

Admin, Tanya, what a cool unit, congratulations, let it serve for a long time, faithfully. Thanks for the yummy sugar link as I missed that topic.

Tanya, thank you very much for the detailed review, I have such an aggregate, I saw more ideas for using it - caviar, salad, puree for the freezer, that's just a pity that I didn't have a mill attachment in the kit - a great thing

[Girls]

Girls, thanks for your attention to my toy
Yes, so small and cozy, and does not interfere in the kitchen at all. And the number of attachments as many as you may need for optimal processing of food for food preparation and workpieces

Yesterday I made lingonberry jam from berry puree, and the cake was used for berry sugar
I also processed fresh prunes in a meat grinder and cooked jam
And, quite unexpectedly, their persimmon jam turned out to be quite unexpectedly good and tasty, when I first passed persimmon fruits through a meat grinder

Jam "kinglet" from chopped persimmon (Admin)

[Admin]

Admin, excellent detailed review. Thank you.
A good meat grinder with great functionality. We must take.

[Admin]

Admin, by the way, with persimmon jam, delicious pies are obtained

Yes, I did not even expect that the persimmon jam hardens so strongly and is so delicious - I recommend making it from the corolok, small hard persimmon.
Thanks for the hint, take it as a keepsake

I also have a Zelmer 987.86 meat grinder, this is a model without a mill and a screw juicer. Purchased in August, I use it several times a week to turn meat or cut and grate vegetables. I'm not overjoyed! At first, I cut the meat into small pieces, but now I just cut it into strips up to 3 cm wide so that they can slip into the neck. I don't even use the tray, I throw it piece by piece - it instantly turns. And used meat of varying degrees of sinewy, and lattices. It is a pity that there is no grill with very large holes for sausages. By the way, after use, I wash the grates and the knife and immediately wipe it dry, and then wrap it in a paper napkin, otherwise it seemed that they were rusting. The graters are also convenient to use, I was disappointed only by the grater for potato pancakes, it is clearly not for raw vegetables. Not tested only citrus juicer, this juice is not for my stomach. Everything in the meat grinder is very convenient and simple, it is quiet and small. If I bought it now and could choose a complete set, I would have taken the same one, but without a juicer and a pancake grater, or without graters at all, I have a combine.

Thanks for reviewing your grinder model
Yes, the range of Zelmer meat grinders turned out to be large, for all tastes and wealth
I am glad that there are various attachments and accessories on sale - and you can buy them.

I ordered a cube-cutter attachment for my model. Tomorrow I will try and tell you whether you need to stock up on vegetables, both raw and boiled

I also have a meat grinder from this company! I'm very happy! Until I bought a sieve-rub to Kenwood, I used a Zelmer press. Now they are working together. And how I chase it in the tail and in the mane in the summer when fermenting Ivan tea !!!!! All my race cars survived!

[Admin]

Admin, Tatiana, good afternoon. Have you tested the cube cutter already? Very, well, very much interested in your opinion about her. Thanks to your feedback, I got a new meat grinder, I could not sleep straight, I wanted this model so much ... my husband was buzzing about her ... I called half of Ukraine, and something didn’t work out, but then I went to my town to the store, and IT is displayed on the window, they just brought it, this particular model and at a very good price

[Tanya]

Tanya, congratulations on your purchase! Until the m / cabin did not disappoint me, it stands on the table, I use it constantly if necessary
All the nozzles are very practical, and you can quickly change and remove them, and it is not a problem to wash

I tried the cube cutter. She does not want to cut into the correct cubes; rather, these are different-sized pieces of vegetables. I cut boiled potatoes and eggs, raw apples and fresh cucumbers for salad. In principle, such a salad cuts have a place to be for a salad. I haven't cut anything else on it yet.
My opinion is that you can buy, or you can survive.But if you need to quickly adjust the salad, then you can buy

For me this m / cabin with all attachments, a hard worker for every child, smart and practical, and takes up little space on the table.

[Orange juice]

Orange juice through the nozzle, citrus juicer



You can see how "clean" the juice is squeezed from the halves of oranges



There is some pulp left on the net. The juice itself is pure, free of pulp.



I like that the nozzle itself sits firmly on the base of the device, does not swing, does not wobble on the sides, which is very important when pressing the wring mechanism.

Overview of attachments for the meat grinder

I have a question regarding the capabilities of the mill for this meat grinder, what they really did with it, what worked out and what didn't?

While grinding only different grains, so that they are well dried, the flour turns out perfectly.
The other was unnecessary. Do not grind damp foods and grains.

Thank you, I was most interested in the flour-grinding opportunity. Have you tried grinding rice into flour?

If you took a strong spelled, then it will take rice

Good day. I was inspired by this meat grinder after your review, I started looking for it, but it's not on sale (((

[Tatyana]

Tatyana, thanks for the review! I liked the meat grinder very much for its capabilities! It’s a pity that it disappeared from sale ... Tatyana, didn’t you try to grind in a mill at the largest grind? What happens? And then your cereals from crimped grain do not allow me to sleep peacefully .. But you probably won't be able to flatten it, the principle of operation is different ... although there, too, for grinding into flour ..

[Marina]

Marina, I did not try to grind grain in a LARGE mill
Ground and crimped grain will have different shapes.

I need to try I'll take it as a souvenir, bookmark it - I'll try to make

[Tatyana]

Tatyana, Thank you. And you will not give a link where you can see additional attachments? For flattening, probably, all the same, rollers are needed, but here, apparently, it will turn out to be just crumbs like buckwheat ...

[Marina]

Marina, I have a photo of my "conditioner:"





Crimps hard grain, oats, wheat and so on ...

[Tatyana]

Tatyana,, it would be interesting to compare side by side. The conditioner, of course, is good, but you have to make do with industrial flakes, fortunately, now at least there is a choice.

I use multi-grain flakes like this:
Healthy food: from breakfast to dinner)) # 88

[Tatyana]

Tatyana, looked. Thank you. I saw something in our stores. I will try first what I can find on the spot.

[Tatyana]

Tatyana, have you tried grinding nuts in a mill and if so, how convenient and high-quality is it?
And in general, how did the mill manage over the past time?

[from solid and dry]

The mill did an excellent job with all the tasks from solid and dry seeds, grains.
The grind can be set from coarse to very fine.

It is undesirable, I would even not say it is impossible, to grind seeds containing oil or nuts in a mill. For example, milk thistle seeds - they are firmly glued to the shaft, like bread to the shaft of a meat grinder. And then it is problematic even to wash the nozzle inside.

In general, I'm happy with the mill

Tatiana, thank you very much for the review, I bought a meat grinder and sooo happy !!

[Tanyusha]

Tanyusha, let it serve for a long time!

Good day! Please advise which grinder to buy for the meat grinder: three oval holes or five round holes (16 mm in diameter). The price is serious, otherwise I would have bought both.

[Admin]

Admin, Tatyana, do you think, and the mill will "take" well dried coconut cake, my own, AFTER pressing the coconut milk, I think it is not very oily it comes out for me.

I cook milk according to the Mistletoe recipe - with heat treatment, so it (milk), it comes out quite fatty for me, a layer of oil, if it stands in the c-ke, I can remove it from the top ... This I mean, I think, most of Oil from the shavings-cake during such processing is boiled down, at the output of the cake, according to the calculations, it is not very greasy. At least I know what ground ordinary nuts look like - not to compare, the nuts are noticeably oily.

[Anya]

Anya, any mill does not take a fat product well. I ground the flax bran, it worked out - but I ground it with effort, the bran stuck on the auger in layers. And the bran itself then became more oily, as if wet.
The second time I will not grind this through the mill.
There are no complaints about the work of the meat grinder, it did it perfectly.

Owners of Zelmer .. how long have you been using the grinder?
not disappointed ?? like???
How much juice is the juicer designed for? do you need it?

Zelmer owners ..how long have you been using a meat grinder?

Absolutely not! Copes well with everything that you give Small, but hard-working

[Zena]

Zena, a meat grinder well done, any meat cuts without question. I even made spaghetti on my own on the standard smallest grid (so far I have not been able to purchase special attachments for pasta). Spices (coriander, cloves, cardamom, dried zest) were perfectly ground with a mill, but with powdered sugar, it’s a bummer - it sticks like a stone on the millstones. It's a shame I counted on her so.

Thanks for answers. I'm inclined to buy it .. but 80 only on order .. 83 then I guess.
and where did you buy spare parts for it .. a plastic sleeve or what is it called correctly there? .. I would like it to be in stock right away ..

[Zena]

Zena, at first I also bought this meat grinder in a complete set, but when I saw all this household at home, I was just horrified - where to store it all. The graters are excellent, but quite voluminous, the citrus squeezer is also large, in general, I realized that this was too much for me, because I don't make blanks and I don't drink orange juice.
I returned all this music to the store and bought a separate meat grinder and a mill for it, and if suddenly there is a need to process vegetables with buckets, then I will buy a vegetable cutter attachment.
Spare parts are sold in all online stores, native bushings for 400 rubles, Chinese for 150 rubles.

Gal, but I need graters .. and a mill is most likely, but squeezers are neither citrus nor any other ... but there is no such set ..

where to store it all.

I have a full set of all attachments (and even more)), all voluminous. But all the attachments, along with the meat grinder, fit on a 45x45 shelf, in a closet, right at hand, in easy accessibility. For the sake of such a meat grinder, you can put something in the pantry, which you do not use so often.

Zelmer assembles very quickly "on time", there are no problems with this, and when all the parts are in place, everything is near, it's super cool