ooo-maslopress
Hello, dear forum users.
Introducing the device: Maslopress Potok-30.
The press is designed for the preparation of natural cold-pressed vegetable oil at home.

Using this press, you can easily make real (without preservatives and other chemical rubbish) oils for yourself and your loved ones:
sunflower, linseed, almond, cedar, sesame, walnut and amaranth oil, pumpkin and many others.

This oil press is simply designed, reliable in operation, and durable.
It is made of a steel channel and an oak barrel. The mechanism that creates pressure for wringing is an ordinary bottle jack (force 30 tons).

The advantage of this press over various Chinese electrical devices made of plastic gears:
1. He does not need electricity (spinning anywhere, anytime)
2. It is reliable, there is nothing to break here (enough for you and your grandchildren)
3. This oil press is not auger. (When spinning, there is no contact of oil with metal)
4. He's not expensive.

What do you get by having such an oil press in your home, in the kitchen:
1. Always at hand, in the refrigerator, natural oil from any oilseed crop. (The choice of raw materials for pressing is yours).
2. Confidence that the oil you have made is truly natural and safe to eat.
3. The pleasure of creative work for the benefit of your loved ones and yourself.

The press is manufactured by the Russian company "MasloPress", Togliatti.

We carefully read the Forum Rules.

Home oil press "Potok-30"

Home oil press Potok-30

Home oil press Potok-30
Home oil press Potok-30
dimonml
Quote: ooo-maslopress
This oil press is not a screw. (When spinning, there is no contact of oil with metal)
And what exactly is the advantage of not being in contact with metal? Oil presses used in industry do not use surfaces in contact with iron or copper products, but use stainless steel, which is inert and easy to clean.
ooo-maslopress
Good health.
All seeds contain a certain percentage of moisture and organic acids. Therefore, the transition of microgram amounts of heavy metals (Fe, Cu, Ni, Cr) from steel to oil is possible, since organic salts are soluble in oils. These salts are catalysts for oil oxidation, polymerization, rancidity and other processes leading to a decrease in consumer properties.

In addition, a metal surface, an oxide film on a metal, can have catalytic properties. Suppose the malslo was squeezed, but the working surface was not washed (non-separable press, etc.). A thin film of oil remains. It is oxidized and then goes into the next portion. The oxidation products from the film cause a chain radical oxidation reaction.

And gold-plated screws, or stainless steel screws are rare.
Sergey3
G ... this oil press is full ... While it is new, it is still normal, but then these pieces of wood crack, there is a distortion and swelling. A friend of mine had one.
What moron had the idea to make a piston out of wood? Look on the Internet there is a video about such only from metal. This is another matter! Only they are not on sale yet.
And about the interaction of metal with oil, this is not critical.

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers