aaschulz
I have no backlash on the bowl of the clips, and judging by the backlash design shouldn't, although the bowl always walked when kneading something dense, especially with a hook. But as long as you have all 3 retainers in place, then there is nothing to worry about. They are most likely not expensive, they change on their own: the old ones are picked with a knife from the shaft and new ones snap in their place.

* just make sure that you have a backlash in the clamps (plastic), and not at the stem. If the stem is loose, then this is a warranty case and change the bowl.
Persik
Good morning! Girls, tell me, can you knead the dough for quiche-tart (flour-oil-egg-water into small crumbs) in a combine and with what nozzle?
nika77
Quote: Persik

Good morning! Girls, tell me, can you knead the dough for quiche-tart (flour-oil-egg-water into small crumbs) in a food processor and with what nozzle?

Persik, if I understand correctly, you should get a shortbread dough. Anyway, a stirring whisk (this is a 3-bar attachment), I think, will do the job easily !!!
1Guly
I've been using 86 Boshik for almost two months now, I'm delighted: yahoo: all the attachments came, up to the grinder, although they wrote that it was problematic, except for the meat grinder with the adapter, so I can't use the lasagna attachment, etc., tell me, an adapter is also needed for a multi-mixer, since it is not "put on", the box says MUZ 8?
Alenky
Good day to all !!! I just want to buy myself a mum84 or 86 harvester from my mcm 5540 gave my daughter !!! I bought a cube cutter for him !!! I found out that now there is a cube cutter for mum 5, I wonder if it will fit mum8 !!! Maybe someone knows? It would be great!!!
Lera-7
Quote: Scarlet

Good day to all !!! I just want to buy myself a mum84 or 86 harvester from my mcm 5540 gave my daughter !!! I bought a cube cutter for him !!! I found out that now there is a cube cutter for mum 5, I wonder if it will fit mum8 !!! Maybe someone knows? It would be great!!!

I don't think it will work. Here are the optional attachments for the MUM8 (sold separately)
MUZ8AD1 Adapter for attachments MUZ8NV1,2,3
MUZ8AG1 Nozzle: julienne disc
MUZ8DS1 Attachment: universal cutting with 3 cutting discs
MUZ8FA1 Attachment: meat grinder + adapter included
MUZ8FV1 Attachment: juice press (attached to the meat grinder)
MUZ8KP1 Attachment: disc grater / shredder
MUZ8KS1 Attachment: fine disc grater (for parmesan cheese)
MUZ8LS2 Attachment: discs for meat grinder 2mm and 6mm
MUZ8MM1 Attachment: multi-mixer with 3 cutting discs + universal knife
MUZ8NV1 Nozzle for attaching lasagne
MUZ8NV2 Prep nozzle noodles
MUZ8NV3 Prep nozzle spaghetti
MUZ8PS1 Attachment: French fries disc
MUZ8RS1 Attachment: Disc grater for raw vegetables
MUZ8RV1 Attachment: grater for nuts, chocolate (attached to the meat grinder)
MUZ8SV1 Baking template attachment (attached to the meat grinder)
MUZ8ZP1 Attachment: citrus press
Alenky
DeFchenki !!! Hi!!! And Nat_ka, Lyubochka !!! AND EVERYTHING !!! Thanks for the topic about Mum8 ... everything is very clear !!! I just want to buy !!! I had mkm 5540 gave to my daughter !!! I want more for kneading dough !!! And whipping !!! Write pros and cons !!! I watched the topic of the Kenwoods, but not mine !!! bosch as it is more reliable !!! My harvester is also good and I bought a cube cutter for it !!! But mum8 ... somehow more Professional !!! I would like to have one for all occasions !!! Meat grinder is not interesting! Juicer too !!! more dough and shredder !!! Well, in the future, the dough is rolling !!! And there How it goes !!! Appetite comes with eating !!! Defiches Write reviews !!! I understand!!! SUMMER!!! SEA!!! RELAXATION!!! WELL WILL NOT WRITE Nothing for a long time !!! WRITE !!!
Nat_ka
And what to write if everything in it works perfectly? Now, if there was something, then we would be here

I have everything for him except: a meat grinder and a spaghetti attachment.

Alenky
Nat_ka !!! Thank you for quick answer!!! Cope with the functions of mixing any dough ??? You see, in Simferopol, there is no place to see it live! Kenwoods are full and Bosch only mkm 5529 cube cutter !!! I could order my mkm 5540 only via the Internet !!! And a cube cutter through the service center !!! Thanks to the site for explaining that 5540 fits. It's just class! But we want to grow more powerful and better !!! That is why I WANT !!! mum 8 ... although they have already come up with a cube cutter for mum5 ... maybe soon for OUR !!! will come up with !!! I am already writing to OUR !!! So soon I will have mum8 ... !!!!
Nat_ka
I reread the topic and answer the question, which I did not answer in time: one protein whips up with a bang. The whisk can be twisted both higher and lower (just for a small amount of whipped).

Alenky , join
sazalexter
Alenky Take a closer look at MUM 5XXX and more compact and cheaper and lighter power for home use with a margin.
PS And why so many exclamation points !!!!!! ??
nika77
Quote: Nat_ka

I have everything for him except: a meat grinder and a spaghetti attachment.

Nat_ka, sooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ... I'm sitting here waiting in ambush .... waiting for feedback on the nozzle - climbing. And it turns out that you have almost all the attachments ... Well, answer my question - does it roll out the dough well? thank you in advance
Nat_ka
Quote: nika77

Nat_ka, sooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ... I'm sitting here waiting in ambush .... waiting for feedback on the nozzle - climbing. And it turns out that you have almost all the attachments ... Well, answer my question - does it roll out the dough well? thank you in advance

No no! I do not have everything that relates to rolling and cutting dough. I just somehow did not set myself the goal of buying it.
1Guly
Good evening! And no one answered me, how is the multi-mixer attached to Boshik via an adapter? I have a lasagna nozzle, but they sent me to my meat grinder with an adapter to Blagoveshchensk, Bashkortostan, and not to the Amur region, so I dance around the nozzles, because I can't use it, it cost me 86 23 thousand, plus the nozzles , we live too far from the center, took the fact that there is not enough plastic.
Nat_ka
Quote: 1Guly

Good evening! And no one answered me, how is the multi-mixer attached to Boshik via an adapter?

I don’t think it mounts differently than my 8400 - without an adapter. Here the whole catch is in the CORRECT assembly. The multi-mixer must be completely assembled. Then just put it on - first, with the handle slightly to the right from the center, put it on the groove and, when he hoped to turn the handle still to the right. Read the instructions carefully (I didn't succeed the first time either)
1Guly
Thank you for your answer, the multi-mixer was already assembled in the box, it has less mounting space than the mounting socket in the combine, there were no additional spare parts, there were no parts in the box, maybe not the whole package was sent?
Nat_ka
Quote: 1Guly

Thank you for your answer, the multi-mixer was already assembled in the box, it has less mounting space than the mounting socket in the combine, there were no additional spare parts, there were no parts in the box, maybe not the whole package was sent?
Where did you put it for fastening? To the leg down position?
1Guly
Quote: sazalexter

The multi-mixer is
Food processor Bosch MUM 8400

Or maybe they sent it from MUM5?
Yes, this is a multi-mixer, it says MUZ8MM1 on the box
1Guly
Quote: Nat_ka


Where did you put it for fastening? To the leg down position?
To the "foot" position down, as in the instructions, and you could not take a picture of the mount
your multi-mixer?
Nat_ka
Quote: 1Guly

To the "foot" position down, as in the instructions, and you could not take a picture of the mount
your multi-mixer?

Bottom multi-mixer:

Food processor Bosch MUM 8400
nest in the combine for multimixer and blender:
Food processor Bosch MUM 8400
1Guly
In my multi-mixer there is somewhere about 1.5 cm "part" that continues, as it were, from the handle of the multi-mixer, and in the sprocket you have a threaded bolt, I have no, try to unscrew the bolt on the handle, this can slide, I don't even know what to call it detail, but could you measure the diameters of the mountings of the multi-mixer and the combine, I wanted to ask right away
Nat_ka
on the multi-mixer "white star" - 2.5 cm
on the combine, the hole for this sprocket is 3 cm.

I looked at the "detail" that stands out. It retracts itself when the multi-mixer is CORRECTLY folded. When we first used it, we folded it incorrectly and did not put it on at all. The head was broken, then everything was correctly inserted into the grooves of the handle - the bowl into the lower groove, the lid into the upper groove of the handle, and everything went fine!
Nat_ka
Like this in the pictures:

Unassembled multi-mixer bottom view:
Food processor Bosch MUM 8400

further in the assembly order:

Food processor Bosch MUM 8400

Food processor Bosch MUM 8400

Food processor Bosch MUM 8400

Food processor Bosch MUM 8400

bottom view in full combat readiness:

Food processor Bosch MUM 8400
Lenusik-sh
I bought MUM8400 today. When the seller showed it to me, when it was installed in the position for the mixer (vertically), the fixing button did not go out to the upper position, but remained depressed. It strained me of course, but I bought it anyway. Because I could hardly find this model in the store. And now I was worried, I read in the instructions that all positions of the swivel knee should be fixed. Although, when the seller demonstrated, everything was spinning - a mixer and whisk. And he said that it should be so. But now I'm sure it shouldn't be that way. In the photo for girls, the lower knee position is fixed, this can be seen - the fixation button is raised. I have not tried to knead anything yet. I'll try to talk to the seller tomorrow. And while the new one, I'll hand it back. But I don’t want to. And maybe spit on this defect? In other positions, after all, it is fixed. Advise me what to do?
Nat_ka
In certain positions, this button is a little sunken. This is normal. Does it still work? What equipment do you have?
Lenusik-sh
The package is the simplest. The locking button does not want to get out at all in the lowest position of the rotary knee. No matter how I tried to move him so that she came out, she was rooted to the spot. And the knee is not fixed.
Nat_ka
Quote: Lenusik-sh

The package is the simplest. The fixing button does not want to get out at all in the lowest position of the rotary knee. No matter how I tried to move him so that she came out, she was rooted to the spot. And the knee is not fixed.

in what position the knee is not fixed?
Lenusik-sh
The position for installing the blender is not fixed.
Nat_ka
Quote: Lenusik-sh

The position for installing the blender is not fixed.

that is, the leg moves back and forth? Then it's a marriage - bring it back!
Lenusik-sh
She can no longer move forward, since the position is extreme, but moves back.
Nat_ka
Quote: Lenusik-sh

She can no longer move forward, since the position is extreme, and moves back.

FAILED is the button and the locking mechanism. There is a way out: service or exchange.
Lenusik-sh
I changed it. That seller was not there today, there was a girl. At first she resisted a little, but then she looked at the device and the problem, and changed it to another.
Everything works in vain. Now it remains to check the car in action.
Lenusik-sh
Thank you for your hospitality! As I feel, I will unsubscribe in the topic. I read all the pages and again in thought. In the photo, the girls showed their new Mumiks, and there on the bowl there was such a colorful advertisement pasted. And I didn't have it on either the first or the second copy.
Nat_ka
Quote: Lenusik-sh

... In the photo, the girls showed their new Mumiks and there on the bowl there is such a colorful advertisement pasted. And I didn't have it on either the first or the second copy.

I didn't have any stickers either. And this is good, because they must be removed carefully, and if it breaks, then tear it off, etc.
Lenusik-sh
I kneaded about 1 kg of dough for dumplings with a hook, then for the filling I mixed cottage cheese with sugar and an egg with a three-bar whisk. The next day, I kneaded a yeast dough for pies 1.5 kg. I wonder what kind of dough you can knead 3.5 kg in it? The instructions say that the maximum amount of yeast dough can be kneaded from 1.5 kg of flour and 750 g of milk + eggs and butter, but this is only about 2.5 kg of dough. When kneading yeast and dumplings dough, the knee staggers a little in time with the movements of the hook. The bowl also plays a little, but nothing rattles. Yet yesterday, I was kneading yeast dough for pies, for 450 g of flour, in a bread maker on the "pizza" mode. There it is warm and kneads without my control.
Lenusik-sh
One more nuance.I tried to tune the dandelion whisk, unscrew it completely, and then he would not almost touch the bottom of the bowl, as recommended in the instructions. But he still needs to stay on the axis at least a few turns of the thread. So I still have a gap between the whisk and the bowl of about 4-5mm.
Nat_ka
The whisk is soft, so you shouldn't unscrew it right next to the bowl. Take one protein and try to beat. Just keep in mind that this will not happen in the first three seconds. Wait a minute or two. Then everything will be clear.
Lenusik-sh
I rarely beat whites. But I often knead the dough for pancakes. After I kneaded the dough for pancakes on a whisk, at the intersection of all the wires, the remnants of the egg (films from the yolk) hung. And yesterday I again made dough on dumplings, not very steep, but in the process of kneading a strange sound appeared in the knee, something began to rattle there, as if the details of the mechanism were being ground. I stopped the process, and the dough seemed to be kneading already. I tried it without a test - it works quietly. Beat the cottage cheese with an egg - quietly. Will it really fall apart soon on dumplings or yeast dough?
Nat_ka
Quote:. Lenusik-sh

... I made dough on dumplings, not very steep, but during the kneading process a strange sound appeared in my knee, something began to rattle there, as if the details of the mechanism were being ground. I stopped the process, and the dough seemed to be kneading already. I tried it without a test - it works quietly. Beat the cottage cheese with an egg - quietly. Will it really fall apart soon on dumplings or yeast dough?

It's okay. And the dough for pancakes is best done in a blender
Lenusik-sh
I have three gluttonous "men" in the family. This is what I will do in a blender to make dough for pancakes. I mix it for at least 2 liters of liquid. In principle, it was mixed very well with a whisk. The lumps did not immediately disperse, the dough stood for a while and then polished it again with a whisk.
barbariscka

Nat_ka On the first page you show a beautiful mill ... I don't quite understand, is she going to the combine?
I became the owner of MUM 86-R1 and I can't find if it is possible to purchase a mill for it as a nozzle? Please share who knows ...
Nat_ka
Together with the instructions, I had a separate advertising tab, where all the attachments were indicated (photo and name). Didn't you have that?
gela
Dear, Mumochki, please tell me if the universal grater works through an adapter or not. There has been no one in the topic for a long time, but can someone still notice my message?
Lera-7
gela, do you mean "Universal Cut"? No, it does not work through an adapter.
1Guly
Quote: barbariscka

Nat_ka On the first page you show a beautiful mill ... I don't quite understand, is she going to the combine?
I became the owner of MUM 86-R1 and I can't find if it is possible to purchase a mill for it as a nozzle? Please share who knows ...
Yes, there are two nozzles, I wrote out through the MUZ8GM1 service center, but I haven’t tried either a mill or a dough rolling machine yet, although my hands itch, but I don’t have enough time after work
gela
Quote: Lera-7

gela, do you mean "Universal Cut"? No, it does not work through an adapter.
thanks for the quick response, without adapter, much cheaper
Nat_ka
Via adapter: meat grinder, dough attachments (rolling, slicing) and cookie cutters.
barbariscka
1Guly Galina, try to share. how they work. I already bought a coffee grinder for minor needs, which grinds spices and nuts, but I'm still thinking about a good mill.
1Guly
Quote: barbariscka

1Guly Galina, try to share. how they work. I already bought a coffee grinder for minor needs, which grinds spices and nuts, but I'm still thinking about a good mill.
Next Saturday I will try to use both the lasagna attachment and the mill, I just need to figure out what to grind, otherwise I have been looking at them since the summer, and I am delighted with all the other attachments: yahoo: We must learn how to insert a photo
Galinka-Malinka
Who has this attachment please write a report about your impressions with a photo.
Food processor Bosch MUM 8400

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers